We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.
قم بتنزيل التطبيق
معلومات عنا
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
قم بتنزيل التطبيق
Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Morocco.
🛥️ Armor your aluminum with TotalBoat — because your boat deserves the best defense!
TotalBoat Aluminum Boat Barrier Coat is a high-build, two-part epoxy primer designed specifically for aluminum hulls and pontoons. It provides superior corrosion protection both above and below the waterline, dries quickly without the need for sanding between coats, and offers excellent adhesion for long-lasting paint finishes. With coverage of approximately 225 sq. ft. per gallon and a simple 3:1 mix ratio, it’s the go-to waterproof barrier coat trusted by boaters nationwide.
| ASIN | B06X3RZRHB |
| Age Range Description | Adult |
| Best Sellers Rank | #33,595 in Sports & Outdoors ( See Top 100 in Sports & Outdoors ) #34 in Boat Painting Supplies |
| Brand | TotalBoat |
| Brand Name | TotalBoat |
| Color | Gray |
| Color Code | #808080 |
| Container Type | Barrel |
| Coverage | 225 sq. ft./gallon |
| Customer Reviews | 4.6 out of 5 stars 262 Reviews |
| Finish Type | Matte |
| Full Cure Time | 3 Hours |
| Global Trade Identification Number | 00811932022769 |
| Included Components | Base, Curing Agent |
| Indoor Outdoor Usage | Outdoor |
| Is Waterproof | True |
| Item Form | Liquid |
| Item Volume | 128 Fluid Ounces |
| Manufacturer | TotalBoat |
| Model Number | 497402 |
| Paint Type | Spray |
| Part Number | 497402 |
| Size | 128 Fl Oz (Pack of 1) |
| Special Feature | Waterproof, Fast-Drying |
| Special Features | Waterproof, Fast-Drying |
| Specific Uses For Product | Exterior |
| Surface Recommendation | Aluminum |
| UPC | 811932022769 |
| Unit Count | 128 Fluid Ounces |
| Water Resistance Level | Waterproof |
R**R
Application
5 step process, lot's of labor, #1. sand boat, #2. JB Weld (Marine Grade) any pock holes, #3. Sand boat again, then use the recommended etching spray, #4. apply 2 part barrier paint 3:1 mix rolls on thick not like paint 3 coats minimum are recommended, last step #5. apply Aluminum AF paint... Well worth the end result with maximum protection, 3 quarts yields 3 coat's on a 14' boat...expect about 2 days to apply with day time temperatures being considered, read all instructions carefully, very detailed wear appropriate clothing and read entire procedures... Very impressive 👍😎
P**1
Sailboat Rigger Recommended
We had our pontoon boat out of the water to refurbish it. I sent photos of our electric motor shaft to my nephew who is a sailboat rigger for advice. It was looking corroded. He recommended cleaning the corrosion off and buying this particular product for protection. It is like a thick paint and was super easy to apply. For sure it will give our motor years more of service. Worth the cost.
L**S
Happy Boater
My pontoon was having corrosion problems. I found this product online used it on the pontoons was a little skeptical if 1 gallon would be enough, but I had enough to do two coats love the product. Very easy to use caution even outside. Vapors are very strong. Probably need a mask.
E**N
Works good
Good product used on my jon boat
F**K
Welder’s worst nightmare
Just got off the phone with my guy whos welding aluminum. “Jesus guy, what kind of primer you use on this!? I had to sand and torch it 3 times to get it off!” Gave me a good laugh. This stuff is pretty tough. Application was easy as long as you take your time and prep it correctly. Pretty happy and If i decide to totally restore another flat bottom in the future(NOT likely) I will be sure to purchase again.
B**W
Aluminum boat hull
Used to prime and protect a boat project. It goes on very thick and rough even when thinned out. Reminded me of bedliner. But that could of been the application process. Cheap airless gun. It did cover well and did a total of 4 coats.
B**D
A few things to keep in mind....
What a great product, just a few things that helped me... It is going to be too thick out of the can. drill mixing attachment to mix the base and hardner together. Thin 10% with totalboat 200 thinner and roll it on with a bunch of small foam rollers. Wear a good respirator, probably too dangerous to spray without a full force fed suit as I have read these epoxies in aerosol can damage your lungs real bad, not worth the risk.. It etches and bonds to even lightly oxidized aluminum. I quit sanding and just washed clean and applied, seems to be holding up no differently than a lot of sanding...
S**L
Buy this now
1000% reccomend this. I bought this as a precaution to help stop any leaks that nay or may not happen. It popped up when I google waterproof barrier undercoat for a boat. This product is not rated to be waterproof I later found out but once I applied it I felt super happy it went on perfectly to my aluminum 16foot boat. I do reccomend getting a top coat for once it drys. Use inside as well if you can
ترست بايلوت
منذ شهرين
منذ 3 أسابيع