IKEA Chair Caster Wheels Replacement, 10mm Stem, 2.5 Inch Rollerblade Casters with Gap-Free Bracket for Safe Barefoot Rolling, Quiet & Floor-Safe, Pack of 5 (Black, Grey/Black)

Purchased these to replace the auto-locking casters that came with my Ikea Markus office chair. They are perfect replacement wheels for non-standard 10mm caster stems (such as those found in Ikea office chairs). I easily installed these in my Ikea Markus office chair (purchased in 2016), although it did take some effort to pull out the originals and to push these in. They are a true joy to roll around on! We have hardwood floors throughout and these wheels are smooth and quiet. I should also mention that these casters will raise the chair up a few cm higher than the original Ikea casters that come with it, so it's worth measuring if that could cause a problem for you. I like that the wheels have a fender and that the ball bearings are tightly sealed so as not to pick up hair and other entanglements on the ground. I will update this review if anything changes. Just to clarify, the Ikea Markus chair (and many other Ikea chairs) use non-standard 10mm caster stems (standard caster stems are 11mm wide....FYI if it doesn't list dimensions it's probably standard sizing). The standard casters on the Ikea chairs have an auto-lock function that they will not roll unless someone is sitting in the chair (super annoying). Ikea doesn't sell polyurethane (PU) wheels (aka rollerblade wheels), and it's almost impossible to find them in stores. But, you can find these products on a variety of caster specific distributor sites, you may want to check and see if you have any local providers (just google caster and you'll see some providers). The online caster distributors/websites seem to have some cheaper options and usually have 10mm stems available. I purchased from AXL because they are prime (easy & quick shipping/returns), have wheels that are sold as replacements for Ikea chairs, quality built, and end up costing about the same as most online distributors/websites when you include/subtract shipping because of Prime. Overall I'm very happy with this purchase so far. The wheels look and function perfectly with my new Ikea chair.....significantly better (and worth every penny) than the auto-lock casters that Ikea sells with this product and other office chairs.

Replaced locked up casters on 18 year old IKEA Flintan chairs. I was going to throw these chairs out because the casters were bad. I saw this product and bought two sets for my two Flintan chairs. I had to try. Perfect fit (10 mm stem diameter) and the roll is outstanding (great bearings). These rubber wheels also work great on wood floors and engineered wood floors. No marks. I am extremely pleased with this purchase and I will buy these again!!

The stock wheel on my ikea chair were horrible and hard to move around but ever since I bought these, the wheels are so smooth and easy to move around. I’ve been having it for a few months and the wheels are still smooth and easy to move. The wheels were easy to install.

If you can't the casters to go in and you are sure your original casters are 10mm as well try lubing them up with something and ponking them in with a mallet. If they don't go in now you can try squeezing down on the grip ring with needle nose pliers. These rings are steel and pretty tough and may not bend so as a last resort you can remove the rings from your old casters and use them on the new casters. It's a hassle but i felt it was easier than sending them back. They're good casters. You can push the grip rings off with the needle nose pliers tips far enough to pull them off the rest of the way. Careful they don't fly across the room. Maybe wrap a rag around the caster when pulling it off in case it tries to get away. It was worth it to get rid of the horrible casters on my Ikea Flintan chair.

These casters work great! So much better than the other set of casters I got from another company for another chair. The chair changes directions so easy and it glides over carpet or hard surfaces so much better. These worked on my office chair from Ikea too.

FANTASTIC! The original wheels on our ikea desk chair had given up! These wheels snapped right into place & gave our chair a second life!!

PROBLEM: My wife loves her IKEA office chair, but the casters went wonky almost immediately. The first plan was to see if I could just buy a new set of casters from IKEA. Hahahahaha! (sniff) You silly optimist you. The second plan was just to rebuy another chair of the same model. Nnnnnnnnope. Don't sell this model any more. CRUD! I was excited when I saw these replacement casters pop up in my Amazon suggestions. And they were PERFECT! At first I was concerned the mount stems were a tad longer than the posts on the original casters. But they fit fine. The rollers work fantastic! You know the old saying: "Happy wife, nobody stabs you to death in your sleep." Or something like that. PROBLEM SOLVED. I'm a hero. Local hero, sure, but I'll take it.

It really fits in my swivel chair.

I received this caster wheels within acceptable time, and the product looks and is robust; definitely an improvement over the OEM (original wheels). But the big problem is that the C-rings used to secure the 10mm stems into the chair wheel leg socket were way out of spec, and impossible to install. I solved the problem by getting my largest needle nose pliers and squeezing the rings closer to a suitable OD (outside diameter), so that the stems would plug in and lock into the caster wheel sockets. Pleased by advised that if you buy this product, have some large needle nose pliers handy.

I bought ikea matchspel chair half year ago. The original wheels easily become dirty and left black spots on floor. This set of wheels fit perfect to IKEA chairs, clean and clear.