StealthMountsBattery Holder Compatible with EGO 56V (4 Pack) - Black Battery Mounts for EGO | Mount for EGO 56V | Made in The UK

I would gladly buy these StealthMount EGO Battery Holders again. And will when I expand my EGO fleet again.I was searching ETSY for a similar product after buying several EGO 3D printed machine mounts (see photo).Based on that exprience I feel that the fit and finish of these Stealth Mounts are superior to what I would find with a 3D printed version.I currently have a total of five EGO batteries that are used in the various EGO products I have. A mix of both 5AH and larger 7AH batteries.Without a good place to keep the EGO batteries I ended up stacking the charged batteries on my rolling tool box - taking up valuable horizontal real estate.I had a basic 2ft x 4ft storage shelf just above my EGO battery charger which was the perfect spot to use the underside for battery storage. Get these off my tool box free from getting knocked off and possibly damaged. A place for everything and everything in its place - so you don't lose or damage things.The ONLY issue I had, which could be an opportunity for Stealth Mounts, it would have been nice to have a simple mount template on the paper packaging. The template would allow for the consumer to use as a hole drilling template keeping in mind the battery width as t is a four pack. A minor annoyance I installed mine with a bit of trial and error.To possibly help others this is what I did with my install:Used my largest battery - the 7AH battery which goes in my mower and snow thrower - and figure out the spacing needed for four large batteries. Yes they are all the same width but the added height of the 7AH battery of the 5AH version could make removal of the battery from its Stealth Mount slightly more difficult.I measured the battery with the mount in the battery - this gave me two things - the distance of the forward edge of the battery to the first and second mounting holes in the Stealth Bracket. With this measurement I was able to determine the mounting location as my situation I had a support board under the shelf to work around. I wanted a neat, clean and lined up install.I figured out the stand off from the back of the battery (when mounted) to the shelf support based on my previous measurement. This gave me the 79MM or 3.10 inches from the support to the center of the set of two mounting holes of the Stealth Mount bracket. As you can see from my photos I left about an inch of wiggle room on the back side.The side to side distance I basically lined up the four batteries on my work bench and figured out how much space needed for a comfortable install and removal of the battery from the mount. I think I landed on roughly 7 inches for each battery parking spot.. So with four parking spots side by side four batteries will take up roughly 28- 29 inches of space under the shelf. Figured out my first spot and marked its 7 inch parking spot. Then for each spot found the center point and marked it out with a 5 inch pencil line. This line gives me the center of the hole for the solo screw furthest out from the stop. With my wiggle room stand off in my install the center of this solo hole was 4 25/32 inches from the stop.If I were to do the install again I would probably nail the measurements a bit better but it turned out okay.I hope this helps the next person with their install.

Exactly what I was looking for.these work well 👏

Works well to store battery on wall.

I've used StealthMounts for several years now with my Makita batteries and chargers. High quality product with easy installation. These EGO mounts are no different but as always with SteathMounts, you pay a premium. Mounts are easy to install, be sure to use a straight edge if you want to line this up nicely.Only complaint is that due to the design of the EGO battery, the clipping mechanism isn't visible or accessible like on other batteries. These are more of a friction mount vs the regular EGO clip style latch. Sometimes this means you have to push a little harder to get these to come off but it's a small price to pay for how secure these are.

Product works well with EGO batteries. Batteries slide in & out easily and yet hold snug with no loose play around the mount. Each mount can be attached with 3 screws to the wall. I put together a wood board to mount EGO chargers and batteries. Very happy with how it worked out.

Great way to keep my batteries organized and quickly available

These are super easy to install and awesome.

Holds these heavy ass batteries well. Perfect fit. Quality plastic.

Il faut surtout pas serré les vis d'ancrage car la monture vas brisée. J'aurais donné un 5 étoiles mais la première monture a brisée.

Keep all my batteries on these, we'll designed

Silmpe to install fits batteries perfect

low profile when not in use

Needs screws and template especially when installing more then one