What is the maximum thickness of door that this will fit?

Very unhelpful answer above. We need to know the max depth of the door.

Can i use this if the floor has a door threshold strip?

I don’t see why not unless the threshold sticks up a lot or is likely to snag it. We have a tile to carpet threshold and it isn’t a problem. It can accommodate a wide range of gaps as the seal is made by the side tubes rather than the bit under the door.

Can these be used with a fire door? We're in a flat and don't have standard doors

Can’t say for sure but I don’t see why not. Check the maximum thickness of the door as fire doors can be thicker and check the requirements for the minimum gap under the door as if the gap is too small it may impede the self closing.

Everlasting Comfort under door draught excluder. Dors it work if door gap varies from one side to the other. Can the excluder be trimmed around door j

Hi It’s a piece of fabric that goes under the door and then has two long tube like hole on each side for you to insert the foam. Foam comes into two long tubes which you can cut. So technically you could trim the tubes vertically but that will not be needed as you only need I’d say 2-3 cm minimum to slide the piece of fabric under the door and the the foam sits at the bottom on each side of the door - not actually under the door. Hope this helps!

Brand	Everlasting Comfort
Model Number	Door Draft Stopper
Colour	Black
Product Dimensions	99.49 x 19.99 x 5 cm; 200 g
Material	Foam
Item Weight	200 g

Effectively Seals Doors

التفاصيل

الوصف

المواصفات

الأسئلة الشائعة