Question 1

what the difference between this and the polycrylic??

Accepted Answer

I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish.

Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired.

Question 2

Will it be very shine and smooth for the surface after I use? thanks

Accepted Answer

Yes.  I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best).

Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats.

PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end.

Question 3

Can this be used on floors?

Accepted Answer

Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected.

Question 4

what is the best way to apply this

Accepted Answer

Use a bristled brush. Those sponge brushes leave bubbles in it.

ASIN	B017NNJ05W
Best Sellers Rank	#78,992 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #79 in Household Polyurethanes, Shellac & Varnish
Brand Name	Minwax
Compatible Material	Wood
Coverage	250 square feet
Customer Reviews	4.3 4.3 out of 5 stars (133)
Finish Types	Semi-Gloss
Global Trade Identification Number	00027426710290
Included Components	Minwax - 71029000
Item Form	Liquid
Item Type Name	Fast Drying Polyurethane
Item Weight	3.74 kg
Liquid Volume	128 fluid ounces
Manufacturer	The Sherwin-Williams Company
Manufacturer Part Number	71029000
Manufacturer Warranty Description	Warranty
Material Type	Plastic
Model Number	71029000
Number of Items	1
UPC	027426710290
Unit Count	128 Fluid Ounces

Minwax Fast Drying Polyurethane Protective Wood Finish, Clear Semi-Gloss, 1 Gallon

Details

Details

Description

Specifications

Common Questions