🔥 Keep it cool, keep it classy!
The be quiet! MC1 M.2 SSD Cooler Heatsink is designed to lower temperatures for your M.2 SSD, ensuring maximum read/write speeds and an extended lifespan. It fits both single and double-sided 2280 modules and features a sleek all-black aluminum design, making it a stylish addition to any tech setup.
| Item Weight | 1 Grams |
| Item Dimensions L x W x H | 0.04"L x 0.04"W x 0.04"H |
| Cooler Heatsink Compatibility | M.2 2280 |
| Cooler Heatsink Material | Aluminum |
J**N
Not bad. Not bad at all
picked up two WD_BLACK SN850X one with a heatsink and one without and saw the none heatsink was running really hot so I did some digging to see what was some of the best options. This was one of them and with a little use of a tiny screw driver had this assembled onto the M.2 and installed back into my rig and now it runs even cooler then the one that came with the heatsink.
P**.
My Favorite Aftermarket M.2 Heatsink.
Out of all the M.2 heatsinks, this is by far my favorite. I'm sure the Sabrent might cool better as it's massive but this was good enough.
T**W
Tiny screws = small issue
I saw a review about bricking their ssd and another about it being too high. So I bought this on a whim because I needed a heatsink for my secondary drive and I can say this works as intended.The design on this heatsink is pretty slim and was able to fit under my gpu (7800xt) on a mATX board. Other reviewers mentioned tiny screws.. Yes they are pretty small BUT to avoid searching for tiny screws in your case just assemble the heatsink in a controlled area in case you drop a screw then install it on the mb. Another thing, the heatsink does not include a m.2 screw those 4 screws are for the heat sink assembly (2 on each side) .
J**.
Works
Works as intended. Was a really tight fight to latch onto motherboard. Motherboard has a latch lock for nvme, had to adjust a couple times to make sure it was level
A**R
Ice cold
Quick and easy install. Just a little extra protection with heat dispersion.
G**T
Fits snug as a bug with Samsung 990 pro in a Rog Ally x
Installation was really easy, I hadn't gone inside a computer in 3 years and it always makes me nervous anyways as I have somewhat large hands. Before completely sticking the thermal pads to my SSD, I made sure it fit snuggly in my Rog Ally x handheld with the SSD (these have a bit more space - I wouldn't try it in an older Rog Ally version).It fit perfectly well without hitting the motherboard, and without crushing the battery cables. My SSD now runs 10-15 degrees cooler (Celsius). This isn't actually necessary according to the handheld manufacturer, but for the price it's good peace of mind.Highly recommended.
A**E
Good quality
The price and quality were good
G**T
Perfect solution
Purchased for my wife's PC she wanted more storage and the motherboard did not come with a second heat sink. Was worried that it would not fit behind the graphics card but has PLEANTY of room. Fits behind her 5700XT without a problem. I don't have numbers on the temps just know from other reviews it will be better than not having anything. So highly recommend this purchase!
ترست بايلوت
منذ يوم واحد
منذ 3 أيام
