Deliver to Morocco

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
INDIA
USA
JAPAN

خدمات العملاء

معلومات عنا

دعم العملاء

1 Lb Solar Flux Type B

Q: Can this be used with a flux cored mig welder.

This can be used on any metal except high-nickel alloys like inconel. It's mostly used for stainless TIG projects but there's no reason you could not use it to back up other processes as well. It can be difficult to remove so it's not suitable for food piping, but it works very well for less critical applications like stainless exhaust systems.

Q: Is it adhesive? Or it should used with other adhesive product?

This is not an adhesive. It is a product you mix with alcohol to make a brushable paste you brush onto the back of a stainless steel seam prior to tig welding to keep the oxygen from causing oxidation.

Q: Can this be used when mig &/or tig welding 304-to-304 and 304-to-409 stainless steel?

Yes, I specifically purchased to apply on the backside of exhaust welds on a 409 system. I was tig welding butt connections and it made a big difference. Also welded 304 clamp collars onto the 409 tubes. Worked great. Search YouTube for more info. That’s how I found out about this product. Mixed it into a paste and applied to back of weld areas.

Q: I'm Oxy/Acetylene welding stainless (gas welding is fun for me), is this flux suitable for the front side of the joint as well?

I presume you wouldn't need it as the stream of burning gas should displace oxygen from the pool as it does with mild steel. It may also contaminate the weld pool if you put it way of the welding operation as they say when you think it is clean then clean it again! It dries on the back to prevent the back oxidising thus maintaining the great anti corrosion property of stainless steel. I use tig but imho it is no way as good as a back purge of argon but you could possibly get away with it for a non critical non commercial job. I hope that helps.

4.7/5

معرّف المنتج: 341836498

معاملة آمنة

يُشترى معًا بشكل متكرر

Harris S0FB01Type B Solar Welding Flux, 1 lb. Can

Acid Brushes - 36 Count 3/8 Inch Horsehair Acid Flux Brushes, Disposable Glue Brushes for Woodworking, Epoxy Brushes for Resin, Great for Crafting, Soldering, in The Home, and School, or Shop

الوصف

1 Lb Solar Flux Type B

المواصفات

Manufacturer	J.W. Harris
Model number	S0FB01
Item Weight	454 g
Product Dimensions	9.4 x 8.38 x 8.38 cm; 453.59 g
Item model number	S0FB01
Item Height	3.3 Inches
Item Width	3.3 Inches
Power Source	Corded
Are batteries included?	No

لديك سؤال؟ انظر ماذا طلب الآخرون

Can this be used with a flux cored mig welder.

Is it adhesive? Or it should used with other adhesive product?

Can this be used when mig &/or tig welding 304-to-304 and 304-to-409 stainless steel?

I'm Oxy/Acetylene welding stainless (gas welding is fun for me), is this flux suitable for the front side of the joint as well?

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

فرحان ق.

كان وقت التوصيل ممتازًا، والتغليف كان آمنًا.

منذ شهرين

نهى س.

اتصال ممتاز طوال عملية الطلب. المنتج مثالي.

منذ أسبوعين

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

9095 DH

الرسوم والضرائب مشمولة

Moroccoمتجر

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية

معاملة آمنة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

سنيها ت.

وصل المنتج في حالة ممتازة. خدمة رائعة بشكل عام.

منذ شهر

ميرا ل.

معاملة سلسة ووصل المنتج في حالة مثالية.

منذ 3 أسابيع

عرض جميع مراجعات ترست بايلوت