Kreg KHI-HINGE Concealed Hinge Jig – Precision Cabinet Door Hinge Tool – Drill Guide for Concealed (Euro) Cabinet Hinge Installation – Adjustable Boring Jig – 35mm cup-style concealed hinges

Easy to use. Usually i dont like all plastic jigs but this has no reason to be any other material. Really happy with ease of use and results

Good tool. Good quality

I have used other Kreg items in the past and was pleased with the quality. I needed to install some soft close hinges and looked on Amazon for drilling fixtures. The other brands were close in price (one was actually only $15). I decided to spend the extra $12 for something I felt may offer more quality long term if I needed to use it again. The fixture is well built. I found the Fostner bit was sharp enough for the pine cabinet doors I worked with. Some reviews mention it being a bit dull. I installed 40 hinges with zero issues. The only thing the fixture lacks is the 1/16" drill bit required for the hinge mounting. They should include two of those and provide a place under the fixture plate to store them. They have a slot for the hex key provided and they could add the drill bits next to that. Good fixture for the price point. Made quick work of installing the hinges. Would be very tedious to lay it all out by hand.

This jig made it so easy to install hinges on my cabinet doors. I installed European style, full overay, frameless doors. The setting on this jig is 3mm or 1/8 from the edge of the cabinet door. Works so well! 100% worth the money and easy to use

I was going to build several cabinet doors to replace the ones in my Son's kitchen and I wanted to use concealed pocket hinges. I had never used pocket hinges before. After reading how to make the holes and how exact you needed to be in placement of the holes, fear started to take over. After researching, I found there were several jigs that you could buy to make the job a piece of cake. I have several other Kreg jigs and I am pleased with the quality and ease of use of them so I decided to spend a little more money and purchase this one. I am pleased to say that it work perfectly and I was able to get all the door holes drilled out and the hinges in place with perfect alignment. The unit comes with instructions on how to set the jig based on the hinge manufacturer's recommendations for placement. This was very easy to do; if the hinge company does in fact provide instructions for this. If they don't, then you are going to have to do some trial and error on some scrap wood in order to find the exact spacing for the holes. The only issue I have with this unit is that Kreg uses a proprietary sized shank for the 35mm Forstner bit. So you can't just use an off the shelf 35mm Forstner bit when this one wears out. You have to buy a Kreg bit. Also, this has a depth-stop collet that uses a set screw to hold it in place. Somewhere during the time I was using the bit, the screw must have worked itself out and I lost it. I had to find a compatible sized screw and cut it to length to use as the set screw and this works. If you find that you have to do this, make sure that the screw is cut short so it doesn't extend past the collet as the weight of the screw outside the collet boundry will cause the bit to become unbalanced and wobble when drilling.

Excellent fixture, simple to adjust depth and easy to clamp and drill doors.

Easily cut new holes for IKEA hinges. If you're making your own fronts it's probably worth getting a cheap front from IKEA to take measurements off. I found conflicting measurements online and the cheapest front is only $10-15.

I needed to repair a kitchen cabinet to install a hidden hinge. This jig and the accompanying drill bit did the trick. My first time completing this type of repair. Easy to use. Cut an accurate hole without damaging the face of the cabinet door.