Headline Sign Stick-On Vinyl Letters and Numbers, Black, 3-Inch, Made in USA (31311)

no tengo mas comentario

Nice letters super sticky

Used these for my daughter’s Halloween costume. She was an inmate and I wanted to put something on the back of her scrubs to identify her as such. Worked fine.I applied the letters individually and used a ruler to keep them straight. Towards the end of the night some of the letters were missing from her costume so adhesive isn’t that strong, BUT it could be because of the material or because I had done several stickings and removals to get the letters straightened when I first applied them. Overall it worked out perfectly for what we needed them for.

Would be a 5 star product if they had put forth just a little effort and include some "user instructions". I opened the package and freaked out a little because they look like blank sheets of vinyl ! After I calmed down and examined a sheet a little closer, I could barely make out the numbers. I taped the sheet to the glass patio door (I don't have a light table handy) so I could see the individual numbers well enough to carefully cut between each number with a straight edge and sharp x-acto knife. You need to trim as closely as you can but that's actually not a problem because there is very little excess room between the actual numbers. After freeing the numbers I planned to use, I carefully folded the backing paper back along an edge. I found different edges work best for different numbers. The left edge on the 6, the right edge on the 3, and so on. Once you get the number lined up where you want it, press down the exposed edge of vinyl number and use the folded edge of the backing paper to slowly and carefully peel the backing paper away allowing the number to fall into place. Some numbers, like the 5, take a little guidance along the way down to their final resting place, but take a deep breath and don't get in a hurry. Your finished product will look amazing. Burnish the final product well and I'm sure these vinyl numbers will last a long time.

These stickers worked perfect for the project we bought them for. My niece wanted this on her wall and it was a mission! The stickers stick perfectly and didn’t rip the paint which was great because I countlessly put them on crooked and had to take them off and put them straight. I will use them for all purposes needed.

This product works well. You need to have patience applying letters like 'W' and "Y" (in my case). Got best results applying them from the top down. All of the letters and numbers I used went on without issue even with alignment adjustments. Time will tell how the adhesion remains in the Florida environment . . So far, I'm happy with the product. The key is to have patience applying them and you'll be happy with the results. . . See pic of my finished project.

These letters stuck well in my wooden tiles. Was able to pick up replace on a few I didn’t line up properly. Also able to get air bubbles out

Difficult to see letter outlines on sheets. Otherwise seem to be of decent quality.

We used 2 sets of numbers and letters to write our company name on a commercial trailer flat deck. It works amazing! Make sure you clean the surface properly before using the vinyl numbers or letters. The surface need to be clean and dry. Any mistake I made - letters or numbers too low or too high compared to the others - I was able to remove it and try again as long as I was still holding on a corner of the letter. I found to be more difficult - but no impossible - to remove it once your full number or letter is stuck on the surface.Make sure you measure the letters and calculate the total width you need, otherwise you might find out that they don't fit. We had limited space on the front and back of the trailer so we really had to make sure it fits.The quality is good, easy to use, no complaints. The only thing I will change is the size. I think 2 inch would have been a better size but that has nothing to do with the product. It's the operator:)

We used 2 sets of numbers and letters to write our company name on a commercial trailer flat deck. It works amazing! Make sure you clean the surface properly before using the vinyl numbers or letters. The surface need to be clean and dry. Any mistake I made - letters or numbers too low or too high compared to the others - I was able to remove it and try again as long as I was still holding on a corner of the letter. I found to be more difficult - but no impossible - to remove it once your full number or letter is stuck on the surface.Make sure you measure the letters and calculate the total width you need, otherwise you might find out that they don't fit. We had limited space on the front and back of the trailer so we really had to make sure it fits.The quality is good, easy to use, no complaints. The only thing I will change is the size. I think 2 inch would have been a better size but that has nothing to do with the product. It's the operator:)

This product was easy to assemble and hang. It does not weigh a lot. The heater is poor, and there are only 2 speeds and no ability to control the temperature. If you leave the house, be sure to turn it off. It eventually heats any area as it never turns off, but if you want heat in a reasonable amount of time, this won't give it to you. It takes hours to heat the small area where I have it (about 16x12). The fire color choices are awful, gaudy, and cheap-looking. There is little difference in the speed you can set the "flames" to, and it doesn't enhance the ugly colors to speed them up or slow them down. What does help is the dimmer switch that softens the brassy and tasteless colors. Wish I'd spent more and gotten higher quality.

I used these white letters to make a crossword wall. Very appealing, easy to use and still well. I just wish they set contained more letters. I had to make a few work by cutting them down to the letter I needed.Some reviews say that the letters are hard to see in the sheets but if you tilt them in an angle you can easily identify which letter it is

My project was to replace worn out stick on vinyl numbers on my lamppost address placard. It did not go well. It is difficult to space and align the characters because they are flimsy. Once placed they cannot be shifted. Turns out that the characters were a little too broad to fit the address placard so I abandoned the attempt and will have to try using a stencil.