VW Ignition Coil Connector Plug Harness - Compatible with Volkswagen Passat, Audi A4 1.8T, 2.0T, 2.5L, 3.2L, 4.2L - 4 Pack VW Ignition Coil Harness with 16pcs Heat Shrink Butt Connectors

My original connectors were shot. Idle was rough and multiple misfires. It's not the prettiest to look at but she's running smooth again. 2010 VW CC.

Used these to wire up a R8 Coil On Plug kit for my 1992 Miata since I am on aftermarket ecu and planning to go turbo. Although these are aftermarket they worked fine for my application and wired up very smoothly with my wiring. For the price I feel its a great buy.

The connectors are not compatible so you can’t switch the plugs. If you are looking to do the job right these wires are too short to properly connect everything together neatly. All that aside they are good quality and do get the job done for the price.

I was hoping to replace my broken coil connectors on my Audi A4 with these, however I did not want to cut the factory wiring harness. I thought I could just remove the pins and slide in the existing pins on the wiring harness. Nope, they are a different size and will not fit into these connectors. If you don't mind chopping up your factory wiring harness to install these connectors then they might work ( I didn't try plugging one into a coil pack). Save your money and buy the OEM replacement connectors, these are cheaper but you get what you pay for.

Resolvió mi problema muy buenas

My ignition wiring harness and its plugs were brittle and cracking causing shorts, blown fuses, and misfires so I bought these. Make sure to buy a kit of the marine style butt connectors because you'll probably mess up a few replacing these connectors. After replacing these and rewrapping the ignition pigtails with the (OEM style) fleece wiring tape I've had no more misfires for more than a year now.

Easy to wire up nice and quality looking

I did a test fit on the coil and it seemed to work ok. When I depinned this connector and the factory one, I found that I could not seat the stock wiring in the connector because the factory pins are slightly larger. I was not planning to cut my harness, so I picked up a pair of connectors from the dealership. The part number for the stock part on my car is 8K0973724.

This worked really well on my 2001 Audi tt quattro 1.8t engine. I'd suggest soldering on some longer tails to these connectors first and covering each solder with heatshrink. Do this so you can replace all the wires that are on top of the engine in the high heat area that cooks the stock wires over time.

Compre este juego de arneses para sustituir los de fabrica, ya que tenia misfires en dos ciliendros. Funcionan perfecto, el auto volvio a tener un encendido optimo, ademas de aceleracion. Los recomiendo ya que los originales se dañan con el tiempo, y si tienes unos 10 años con tu auto, esto es algo que debes hacer por mantenimiento, ya que es comun en autos de VW

Excellent

I received two pieces only not 4 as mentioned, and no connectors included, have to return it since this behaviour unacceptable