Does this connect with tesla model y 2020 build? your website says it does but this ad only says model 3, and a customer claimed it didnt work with y.

Yes, this works perfectly with my model Y. I am using this with OBDLink LX OBD2 Bluetooth Scanner for Android and Windows from Amazon. The plug is inserted behind a panel between the back of the two front seats. CAUTION: The model Y must be sleeping before you unplug and insert the pigtail. I did this from inside the model Y in the back seat. Open the front door with your key of choice present. Close the front door. Get into the back seat and close the door. Reach forward and on the touch screen power off in the Security menu. Don't touch anything else such as front seats. Wait 10 minutes. Use a timer. Sometime after 8 minutes you will hear a loud bang. You can't miss it. If you're not sure it didn't happen yet. You will be sure when it does. Once you know the car is sleeping, proceed to remove the panel and unplug and insert the pigtail. At this point you can plug in the OBDII dongle. I am using the Scan My Tesla app.

Can you tuck in everything within the cover, or does the obd ii port has to stick out since it might not fit?

You leave the tail sticking out of the trim with the adapter on. Easier access if you need to re-pair the device. You can tuck this along side the drivers seat.

What changed with the 2022 model to make this not compatible?

Installed and works in a 2022 Model Y, just fold the adapter over itself to make it change input from output by 90 degrees and it will fit below the center rear cover. Don’t forget to power down the vehicle battery first using the console and wait 2-8min with driver window down.

Will this enable and work with the new ring car cam (dashcam) which requires an odb-ii port to function?

Yes. Owners of the Model 3, X, S, and Y that have Sentry Mode enabled will be able to install a device connecting Ring functions to their vehicles’ existing cameras.

Manufacturer	OHP
Brand	OHP
Model	OHPTesla-Variation
Package Dimensions	21.21 x 11 x 3 cm; 91 g
Item model number	OHPTeslaCable
Manufacturer Part Number	10264
Item Weight	91 g

OBD2 Adapter for Tesla Model 3 & Y Since Year 2019 | Fits OBDLink Veepeak w/Scan My Tesla App

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة