What's the difference of the air horn type vs. seger? the air horn types all suggest a relay & wiring; install seems different. i'm a novice to this!

This is an electromagnetic transducer mated to a horn. A true air horn works on air alone. The true air horn comes with a miniature compressor- that is where you hook up the electric wire to the car's wiring- or run new wire to a relay then to a horn button. Then the line from the compressor to the true air horn is a tube for the air. The air horn itself does not use electricity- just the compressor. That is not the case with this product. If the product uses more amperage than the wiring for you current horn can deliver, you need new wire from the relay to the horn. If not, keep the stock relay and wiring. You will still need to run some wire from horn to the second horn, and for grounding the horns if your horns are a 1 wire horn. Be sure all wiring has some slack to account for vibration and zip tie it away from hot parts.

Will this fit my challenger 10? And be louder? But legally

It should fit with no problem and the horn loudness is double your average horn sound it's much louder than any standard horn but not too loud.

How are the two horns actually connected to each other before connecting to vehicle ? Is the an extra cable ?

There are no wires or cables provided. Both horns require power and ground. You may have to add a ground or power wire as needed for your application.

Do this fit 2014 kia optima

I believe these horns will fit any car. That said, you will have to puzzle out the location and wiring if you don't already have a two-horn (two tone) set. In any case, basic instructions are printed on the outside of the box.

Manufacturer	SEGER
Brand	SEGER
Product Dimensions	10.59 x 9.09 x 9.19 cm; 512.56 g
Item model number	60BO12.106.02K
Manufacturer Part Number	60BO12.106.02K
OEM Part Number	60BO12.106.02K
Voltage	12 Volts
Item Weight	513 g

SEGER

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة