FastCap Zero Clearance Tape, 5 Strips, 2" x 16", Made in USA

all good

As advertised

Mit dem Produkt bin ich sehr zufrieden aber die Arbeit den Anschlag neu einzustellen ist mühsam. Qualität von dem Klebestreifen ist hoch, klebt sehr gut, auch nach gut 50 Schnitten. Der einschnitt reisst ganz leicht ein beim 1. Zuschnitt aber ich hätte mit mehr Gefühl arbeiten können.

簡単にゼロクリアランスができます 枚数も十分にありテーブルソーとスライド丸鋸に使用してます

I bought these to attach to my workshop mitre saw. They arrived very quickly indeed, and just as quickly were attached to my machine. It was a 5 minute job and they work perfectly. It made me realise, I need to by a better saw blade, one with a higher tooth count to make everything finish off without roughcuts and tear-out. Very pleased, well recommended.

These are fantastic. I have an Evolution R225TBL+. Bought it with Evolutions own zero tolerance plate. The plastic inserts are so brittle they literally disintegrate, even with a fine tooth blade (see pic). Put this tape on, easy as anything and stuck real nicely first time and the cut is clean with zero tolerance as expected! Steps i followed: -Ensure blade alignment is 90° -Remove riving knife -Lower blade all the way -Put the tape on the plate -Put a piece of wood over the slot/tape and clamp it down to the table. This ensures the tape has no possibility of flexing/lifting when the blade approaches it. -Turn the saw on -Slowly bring the blade up It will cut through the tape and the thin piece of wood covering the slot. -Once fully extended, slower blade all the way back down. -Then turn off the saw. -Remove the wood, followed by the plate. -Using a ruler and a new sharp Stanley blade, align the rule with the cut on the tape and continue the cut all the way to the back of the plate. This now allows for the riving knife to be reattached and can raise through the tape as per the blade. I actually went back to the original Evolution plate before sticking this tape on as the zero clearance “upgrade” they sell actually has a wide opening to make way for their brittle plastic inserts. Made sense to go back to the original as its stronger and narrower.