【Compatible with Bullet Cameras】 Universal Bullet Security Camera Base Junction Box, Waterproof Metal Hide Cable Mount Bracket, Outdoor Electric Enclosure for CCTV Cams(4 Pack)Global Recycled StandardGlobal Recycled StandardGlobal Recycled Standard

These are really high quality. Solid aluminum construction, all the mounting holes are threaded, each one comes with silicone gaskets and all the screws needed. The conduit holes come with silicone grommets, two solid ones and two with a cutout for an ethernet cable. Really just great.They do work with the new UniFi Protect G6 Turret camera, though you will have to assemble in very specific order and there is minimal space inside for excess cable, so plan accordingly. I had to enlarge the holes on the UniFi mounting bracket (the black one) to fit screws into the face of the junction box. I used a 13/64th drill bit to enlarge the holes, very easy. But, these are perfect and the absolute minimum size that would work with the G6 Turret. Picture is from test fitting to make sure it would all go together, cable is spooled up inside. Super clean and nice.

For three of my interior cameras, I modified regular electrical boxes from Home Depot, drilling holes in the face plate to fish in wires and mount the cameras, then painting them house colors instead of gray. But for the eight cameras that were going outside, I REALLY didn't want to do that much work. These fit the bill almost perfectly, and I wish I'd gone looking for them sooner.Overall they're sturdy in the hand, seemingly made of good materials. (I guess time will tell on that... being out in the Las Vegas sun will certainly put them to the test.)The center holes and their removeable plugs made wire placement easy, however I did have to cut my removeable center plugs so that they would wrap around my wires, rather than pulling the wires through the hole. But that's because I had a big honkin network connector that simply wouldn't fit through the plug hole.One puzzling thing was the camera mounting holes on the faceplates, which took a minute to wrap my head around. These appear to be designed to fit about eighty thousand styles of camera, with mounting holes all over the faceplate. At first I was annoyed thinking that the holes penetrated the faceplates and made them swiss cheese, but they didn't, they're only partial holes. My particular cameras sat a little low-of-center on the faceplate, which gave me minor concerns of possible water seepage into the center hole. But after mounting everything and looking it over, I'm confident water won't be an issue. (This has not been tested yet though.)The one negative I can give these is that there's only two punchouts for conduit to attach. This might not seem like a big deal, but depending on where your conduit is going to run, (left, right, top, bottom), it makes a difference because of the way the faceplate mounts to the body. Because the faceplates already have holes to mount the cameras, and because the faceplates only mount to the body in a certain orientation, that could be problematic to someone depending on how the body needs to be mounted to accept their conduit. In my case it wasn't an issue because I had conduit coming into the bottom, but for someone else I think it could be.All in all it's a good product though, and I have no buyer's remorse.

These are well made camera mount boxes. I was having issues with water on my camera connections. These gave me a place to secure my connections and keep them dry. The price is much more reasonable than the camera manufacturers mounts.. There are a lot of mounting configurations for the cameras and they fit my Reolink cameras perfectly.I have purchased 2 sets so far and will buy more if needed

It was easy to install on the under side of eaves of a house. I wasn't really concerned with water getting inside, but the gasket that comes with it might be a pain to get in place while screwing the cover on. This box didn't list the camera I was mounting as compatible, but I bought it anyway since I didn't find any other good solution. I was able to line up 2 out of the 3 hole of my camera to the screw holes on the box. After it's all mounted both the box and the camera are rock solid so I'm happy with it!

Great product. Worked really well with my Reolink cameras.

Works perfect for UniFi g5 turret ultra camera. Hole 5 lines up. Solid design. Water proof. All the hardware included works great. No need to add anything else. Has two knockout for 1/2 conduits.

Great alternative price wise to what Reolink has to offer. I'm currently using these with Reolink B800 bullet style cameras and install/cable management was a breeze without adding too much bulk. The included drill template made the installation painless.

I purchased these to provide a way to mount my cameras easily, have the ability to remove cameras easily and keep Ethernet cabling protected. The cover offers a large amount of threaded camera mounting hole configurations. The cover comes with a gasket and mounting screws. The construction is very nice and well built. It comes in white, which is what I wanted, but I imagine you can spray paint it to a color that matches the surrounding colors. I would highly recommend this for a clean and professional looking install.Install:For a solid mounting surface, I added 2x6 wood block above soffits and drilled a 1" hole through blocking. I attached the junction box to blocking. The soffit material was cut to fit around the junction box and I caulked around the junction box to weather seal.Bullet Cameras:Most bullet cameras I have seen, allow you to adjust pitch but not always horizontal angle when mounting to a soffit. Before installing, I suggest you figure out the mounting hole configuration for your cameras and temporarily mount camera to understand camera position relative to the junction box mounting position. This will allow you to figure out horizontal angle of the camera (4 positions depending how you attach cover.