Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RB06)

Used on the tie rod ends of my 2011 MKX. If you over stress the tool the hinge pin pops out. Far better than having the tool break. For the price, it's hard to beat the value.

Works great bought because I had to replace some ball joints and swing arms and tie rods

Nice sturty tools that separated the front end parts I needed to repalce. They mad the job easy.

I bought this to do a job on a 2012 fusion. All but one of the ball joint separators broke. The only reason the last one probably didn’t break was because it wouldn’t fit on the one that was stuck. Maybe it’s because it was just seriously stuck or a combination of me not using them correctly but they did make the job easier than it would have been without them. I was disappointed and came to Amazon to leave a bad review but seen a guy mention that he contacted them and got another free kit, so I did the same. They sent me a brand new kit without even asking many questions. Took about 2 days from when I emailed them. Customer service was great and that’s why I would recommend them. Maybe not the strongest tools or best quality but they’re cheap and if they break on you you’ll get a free replacement so I think for the $50 it’s worth it.

I’m a home mechanic I do my own work on my car. This is a quality tool and if you do in front end work, it’s a must have makes the job easier and faster..

EDIT-updated from 2 star to 5 star I reached out to OMT directly about the broken tools and they responded quickly. They shipped out a replacement with a lead time "around 3-7 business days". It arrived the very next day. I was finally able to pull the pitman arm after 2 weeks of wrestling with it. It was rusted in place but these tools broke it free. I'm leaving my original review below for reference. I'm not sure if was user error or faulty tools, but OMT came through in the end. ORIGINAL REVIEW: Four of the five tools broke while using them. The 5th tool (separator) only survived because it wouldn't fit around any of the ball joints on my 1992 Toyota Century. The large claw puller was able to move the pitman arm down a few mm before cracking. I used an obscene amount of silicone grease on the threads. I didn't use an impact wrench. The joints have been sprayed with PB Blaster several times daily for about a week. I did everything I could to give these tools a fighting chance and they still broke. The large adjustable puller bent out of alignment on the first try. The arms are no longer even and do not sit flat making it useless. The bolt on the smallest puller sheared when I used a tube as a breaker extension. I had to use a hacksaw to cut it free. The large puller was the perfect size for the pitman arm. I went super slow with the tube extension, tightening a half turn or so before backing off, hosing the steering column down with penetrating fluid, and then tightening it again. Using this process, it moved a few mm before the claw snapped. I tried my luck separating the ball joint side of the pitman arm with the small puller. Using only a wrench (no extension) the claws began to bend backwards. I expected a little bit of a hassle when using these. Even one broken tool would've been understandable, but four? The metal used is of terrible quality. I do not recommend.

Can’t recommend this kit enough to coworkers. I had used one of them on a 2000 dodge ram 1500 to get the idler arm off and after using my air I left to get it as tight as I could, I then took my heavy sledge hammer and hit it until it came apart. The tool lived, the trucks apart

Received the item yesterday First thing is the pitman arm puller must be for a go kart. Didn't even come close to fitting Second used 2 claw puller on tie rod end and the end of the claw broke off before it even got tight Waste of time and money. Returning it tomorrow for refund. Looked like a great set but it deceived me

strong

السعر مبالغ فيه جدا

I used the Ball Joint Separator and Puller to replace the steering spindle on my SUV, and it worked flawlessly. The tools are solid, well-built, and made the job much easier than I expected. The different attachments fit perfectly, and the leverage on the pullers is excellent. Saved me a lot of time and frustration. Highly recommend this set for anyone doing suspension or steering work at home.

Las herramientas se ven de gran material y de buena durabilidad, de momento gran producto

very useful tools