chenyang CY 50cm eSATAp Power ESATA Combo to SATA 22pin and IDE 4pin 5V 12V for 3.5 2.5in Hard Disk Data Cable

It was a financial loss to me, as it did not fit into the computer motherboard well and the hard disk was not detected all.

ノートパソコンのHDDをSSDに交換したく。このケーブルのおかげでクローン化が高速にできました。古い機種なのでUSBが2だったんですよね。

Guter Adapter!!!

5 stars for 2.5in drivers. 2 stars for 3.5in drivers, but it can work.Thanks to one of the reviewers, I was aware that the molex connector already got 5V from the eSATAp connector. I have connected to my laptop eSATAp and actually measured 5V on the red (+5V) / black (GND) wire pair.One can ONLY connect 12V [to the other pair: yellow (+12V)/black] in order to drive a 3.5in HD. 2.5in drivers only need the 5V already present from the eSATAp port.I am going to just cutoff the red wire (and insulate it) because it is not needed and will cause trouble if an external 5V source is accidentally connected (one reviewer lost a 3.5in HD).If your eSATAp port is from a desktop (which I don’t have), I suggest you connect the adapter and measure the voltages on the red and yellow wires. 5V will probably be there, the 12V may or may not be.And, by the way, the 4-pin “molex” type connector is of low quality, as pointed out by many reviewers. If you have to use it, I suggest to carefully plan and connect it only once. I am using a better quality female/male molex adapter with mine, and do not intend to ever remove it.Finally: for the price, it is a good value. It worked without any issues with my 1TB, 2.5in HD. I have not tried yet with a 3.5in drive, but it should work, if one takes care of the issues discussed above.

Hace lo que debe hacer. Los conectores son de calidad. Ideal si quieres utilizar tu disco antiguo de portatil por E-SATA sin las perdidas de velocidad que pueda dar el USB o problemas de arranque de sistema operativo en discos USB.