

🎵 Dominate the streets with bass that speaks louder than words!
The Skar Audio EVL-10 D4 is a 10-inch car subwoofer engineered for serious bass enthusiasts, delivering up to 2,000 watts peak power and 1,000 watts RMS. Featuring a robust 3-inch high-temperature dual 4-ohm voice coil, competition-grade paper cone, and advanced EVL suspension, it produces deep, precise bass across a wide 28Hz-300Hz frequency range. Designed for durability and high output, this subwoofer is the ultimate upgrade for professional-grade car audio systems.





| ASIN | B06VVC37SS |
| Additional Features | Hi Res Audio |
| Antenna Location | for surround sound systems |
| Audio Driver Size | 10 Inches |
| Audio Driver Type | Dynamic Driver |
| Audio Output Mode | Surround |
| Battery Average Life | 12 Inches |
| Battery Charge Time | 40 Hours |
| Best Sellers Rank | #6,432 in Electronics ( See Top 100 in Electronics ) #2 in Car Component Subwoofers |
| Brand | Skar Audio |
| Built-In Media | Skar Audio EVL-10 D4 10" Dual 4 Ohm Subwoofer |
| Color | Black |
| Compatible Devices | MP3 Player, Smartphone, Tablet, Television |
| Compatible with Vehicle Type | Car |
| Connectivity Protocol | Wired |
| Connectivity Technology | Wired |
| Control Method | Remote |
| Controller Type | Remote Control |
| Customer Package Type | Standard Packaging |
| Customer Reviews | 4.6 4.6 out of 5 stars (6,699) |
| Enclosure Material | Paper |
| Frequency Response | 300 Hz |
| Global Trade Identification Number | 00767408281324 |
| Impedance | 4 Ohms |
| Is Waterproof | false |
| Item Dimensions D x W x H | 30.5D x 30.5W x 30.5H centimeters |
| Item Type Name | Car Subwoofer |
| Item Weight | 31 Pounds |
| MP3 player | No |
| Manufacturer | Skar Audio |
| Maximum Range | 10 Meters |
| Model Name | EVL-10 D4 |
| Model Number | EVL-10 D4 |
| Mounting Type | Car Mount |
| Number Of Circuits | 1 |
| Number of Audio Channels | 2.0 |
| Number of Items | 1 |
| Number of Power Levels | 2 |
| Power Source | Corded Electric |
| Processor Count | 2 |
| Signal-to-Noise Ratio | 81.9 |
| Speaker Maximum Output Power | 2000 Watts |
| Speaker Size | 10 Inches |
| Speaker Type | Subwoofer |
| Specific Uses For Product | Car Audio |
| Subwoofer Connectivity Technology | Wired |
| Subwoofer Diameter | 10 Inches |
| Total Ethernet Ports | 2 |
| Tweeter Diameter | 1 Inches |
| UPC | 767408281324 |
| Unit Count | 1 Count |
| Warranty Type | Limited |
| Water Resistance Level | Not Water Resistant |
| Wireless Technology | No Wireless Communication Technology |
| Woofer Diameter | 10 Inches |
A**X
Used this to replace the blown subwoofer in a Klipsch ProMedia 2.1 sound system. I'm still in the process of breaking in this new speaker, but from what I hear already, this makes the sub sound better than what Klipsch made it originally — much better sounding deep bass. I've one more copy of fully functional ProMedia 2.1, and I'm seriously considering swapping the sub on it with this as well! For those of who you'll be attempting this swap, remember that the speaker connectors on this are of different size than what the stock Klipsch speaker used, so be prepared to order a set of connectors to modify the original wire (or just solder the wire). This speaker is also a dual-connector 4 ohm one so connect the leads in serial (connect one set of + and - using a wire directly), and then use the remaining + and - for the original Klipsch amp's connectors. Other than that a snug drop in replacement. You'll need to ditch the original metal grill afterwards. See the attached photo for the installed version.
G**X
Ni 100 wats y parecía que se iba a desarmar y nada de graves, parece más un medio
H**S
I bought this based on good reviews. However it does not sound good. Highly boomy.
C**N
It's hard to believe this subwoofer costs $160. The build quality is top notch. It has a high roll surround, stitched surround, the tinsel leads are woven into the spider, super heavy motor structure and basket. All things you usually see on a much more expensive woofer. I built a ported box to skar audio specs, 2.5 cubic foot net internal volume with a 32 square inch port 19 inches long. I did a 1.5 inch front baffle to reduce any flex. The woofer is being powered by a Rockford fosgate bd1001cp that's rated at 1483rms @1ohm. So far I'm extremely pleased with the low end frequency response and the overall accuracy of the woofer. It's incredibly loud and quite powerful. I don't hear the sub struggle whatsoever even when I really hammer on it. It can be a little sloppy on some more rapid bass notes, but I attribute most of that to the fact that it's in a giant ported box. Being a first time customer to skar audio I was a little skeptical on what I was getting just because the prices are so competitive. But I'm pleasantly surprised, I would definitely recommend skar audio to anyone who is on the fence. On another good note, shipping was fast, 3 days from the time I ordered. And like the other reviews have said, the woofer came in 3 boxes, one larger Amazon box with some paper padding, and then 2 separate skar audio boxes. The subwoofer motor is packaged in a big piece of formed foam that keeps it from moving, along with a piece of cardboard with foam on the cone and surround of the woofer. Inside all of that is the woofer wrapped in a plastic bag. So needless to say the woofer came without damage and in perfect condition. Sorry if this was a little long winded, hope someone finds it helpful. Have fun bass heads 🤘
A**R
This lil thing KICKS ASSSSS!!!! It blew me away that a sub so small could sound so BIG. Awesome sub... will but again
ترست بايلوت
منذ 4 أيام
منذ أسبوعين