Wireless Light Switch Kit 1+1

This is a great wireless switch. It was easy to install, looks great and works like a charm.

I was a little skeptical if this would work reliably for the price. But have no worry. It was easy to install, it worked on the first try with no silly programming or adjustments needed. I’d highly recommend this if you don’t want to wire up a new switch. When you turn it off you have to press and hold it for a split second. But it’s not a big deal once you figure it out. Excellent deal for the price.

I had bought the DEWENWILS Wireless Light Switch and Receiver Kit in hopes of an easy, wire-free way to control my lights and fans. While the product itself gave me some trouble-the connection between the switch and receiver was intermittent, and the range was far less than advertised-I was impressed with how quickly and professionally customer service responded. They were fresh, attentive, and genuinely tried to help resolve the issue. It may be that this particular product just didn't live up to my expectations, but the support provided has made me confident in the company. That being said, I would continue using their products in the future because of the good customer service; I know they stand behind what they sell.

It is so great that technology allows the placement of a light switch that does not require running wires to the switch, and for a very low price. This is my second install of one of these remote switches to this same light, the first having failed after a week (different brand, who was going to get a negative review until I realized while installing this one that I had made a wiring error the first go round). What I appreciate about the Dewenwils wireless switch kit is the size of the receiver. I needed it to fit within a Wiremold junction box (4th picture), which is quite shallow. The first kit I used had a little bit larger receiver and it was a bear getting it to fit. The other thing I appreciate is that the wiring is super straight forward. Two input wires, labeled on the device as such, and two output wires, also labeled. Very easy to hook up. The switch works well. (Or, worked well. See below.) The switch gets mounted to the wall and at quick glance looks like a standard light switch. On closer inspection, you can see that the switch is a bit fatter than a normal wall-mounted light switch, because it holds the electronics (see photo 3). The kit also comes with a mounting plate that gets fastened to the wall. The switch box has little pegs that slide into receiving cradles on the mounting plate. The Dewenwils kit has three pegs and cradles and the first kit I used has four. See photos 1 (Dewenwils) and 2 (from the old kit). Each mounting plate has screw holes for attaching to the wall. Notice in photo 2 that, in addition to the 4 pegs, there are a total of 5 holes, including the large ones at the top and bottom center. These are placed deliberately so the mounting plate can be screwed to an existing junction box. In photo 1 (Dewenwils), the mounting plate only has two little holes, on in the upper corner and another in the opposite lower corner. I was so pleased the first time I installed the remote switch (the one I fried) when I discovered that it attached so smoothly to my existing junction box. It just happened that I had a junction box in the perfect spot to mount the switch. It was so perfect! No longer would I have a blank cover plate on my wall, instead I'd have a switch that controlled the ceiling light, and oh so conveniently, the new switch attached just like screwing on a new cover plate. Well, and here's my complaint, the Dewenwils does not have the same aligned holes and therefore it became very complicated to mount. What a silly oversight. For me, the only location that really worked to place the light switch was over the existing junction box, but without the properly aligned holes, there was no way to get it to attach. It would have looked stupid to have this switch right next to a covered junction box, or right above it or below it, or awkwardly on some other wall. I thought to maybe attach the switch to the junction box cover with command strips, but that was going to look ridiculous. Such a simple thing as a couple of mounting holes was missing and I would have returned the item if I hadn't already gotten it all wired and functioning. This oversight on the manufacturer's part cost them a star. Fortunately for me, I was able to disassemble both switch boxes and swap the electronics from one box to the other. The innards are exactly the same and this was easy to do once I liberated a couple of screws. So now I have the new receiver in my light fixture that is communicating with the old switch and it is nicely mounted right where I want it to be, over the unused junction box on the wall. It is unfortunate that I had to do this, because the switch design isn't as good as that of Dewenwils, but I'm happy enough with the work around. If I knew about the mounting plate issue before I ordered it, I would have kept looking.

I love this light switch. It was easy to install and I haven't had any issues with it. It functions exactly as it is supposed to. I used it to get my kitchen light isolated since I had no switches between my living room light and kitchen light, which are on the same circuit. It solved a headache problem for us without hurting our wallets. Highly recommend.

Wish I had read the negative reviews on this product BEFORE purchasing. Since wiring this into the circuit, I have experienced ALL of the same problems outlined by other 1-star purchasers. Intermittent operation to say the least. More problems with turning the circuit "off" than on, but BOTH are unreliable. The control module was mounted in a plastic electrical box -- not metal. I knew better. As for the 100 ft range? The switch unit is mounted approx 6 feet away from the control module, and the signal merely has to go through one layer of sheet rock, about 7 times out of 10, it doesn't respond. So now I have to uninstall it and pack it back up to return to Amazon, which means I'll have more time invested in this defective product than it is worth. Over the past few years I have purchased other remote wireless switch units from Amazon, and they all worked flawlessly. I'll send it back for a refund rather than exchange. After reading the problems that others have had, I have no faith in the reliability of this product. I'll just order something else from Amazon, and try my luck. Don't buy this product, unless you want something that's extremely unreliable.

At first they were great but over time they just kept getting more finicky. Batteries in the transmitter last almost a year but can be changed. The signal distance is terrible, had to move both transmitters closer in order for them to kind of function. 1 of the transmitters has to be within 3 feet and double pressed or it doesn't function. Tried to follow troubleshooting steps but it didn't resolve the issue. The overall build quality is okay considering it's around $20 compared to a brand name for $150 at the local box store. Installation is very easy but getting out to for in the box can be a pain.

We have wall sconces on either side of our bed that are difficult to reach while lying down. I installed one of the receivers in the electrical box behind each sconce, and secured the switches on the wall with Command strips where they can be easily reached from the bed. The wireless light switch and receiver installed quickly and they work perfectly. This is exactly what I needed.

Does what it claims to do, range is a bit tricky and it needs to be positioned just right if you are using all three switches. The switches, feel very cheap, and have a cheap clicky feel to them that does not feel good.

Son prácticos, funcionan bien, solo antes de colocar el apagador, deben verificar que enciendan y prenda bien por qué la señal se ve interrumpida fácilmente.

I ordered the single switch with two receivers. Installation was a breeze. Turned off the power, connected the existing white wire to their blue and existing black wire to their red. I hooked up a test light to their black and white wires and turned the power back on and the receivers worked immediately when I clicked the remote switch. The only negative is the screws provided to mount the remote to the wall really have to be tightened down so they don't sit too high and block the remote latching in to the frame.

I found the instructions a little confusing, not north american terminology, but it works great, thank you

Muy buen sistema de luz inteligente. Tarda un poco en prender y apagar pero bien