KOM Cycling CM06 Quick Release GoPro Computer Mount for Wahoo and Garmin Bike Computers (Bike Mount Compatible with Edge 1050, Wahoo Ace and Others) 1050 Bike Mount Compatible with GoPro Accessories

When reading the reviews, I saw a striking review made by Paul that when attaching the Wahoo Mount, the GoPro head will be in the wrong direction. So surely, I already knew he didn't know what he was doing, so I bought the product knowing that there would be a chance my GoPro mount would be in the wrong direction with a Wahoo computer. I received the product and attached the Wahoo Mount and yes, the GoPro mount did go sideways, but within a few seconds, I figured out you can rotate the GoPro mount with a Allen key (which is provided with the mount) to rotate it a quarter then to move the GoPro mount back in the right direction. (Bolts used to rotate the GoPro mount and wahoo mount on the bike mount in photos) Nonetheless, someone isn't very technical and is quick to say a product is faulty. Overall, the product is very sturdy and well made. For half the cost of most competitors it is a well worth product. (Most high quality products that have both Garmin/wahoo mount and GoPro mount are usually $60+, while products cheaper are too flimsy, this is definitely best bang for the buck.) In addition tools are provided to configure everything on the mount the way you want it. Product is made in Taiwan.

Mounted quickly on an e-bike. Garmin watch goes on top (with Garmin clamp) and GoPro Hero 8 underneath, using included mount. Clamps with enough friction so it doesn't move, but still can be adjusted each ride. Will get another one for my road bike. Only downside is this is a bit pricey but cheap clamps usually end up costing me more when equipment falls off (lights, phone, etc.) so I think this one is worth it.

This mount is well designed and does what it’s designed to do. It does seem a bit heavy, but very acceptable. It comes correctly configured for a Garmin. Changing the mount for a Wahoo was a bit of a struggle. It came with feature information but no instructions. I’m technically inclined, but struggled getting it right. It seemed simple enough to swap out the black mount for the Blue Wahoo mount. It was easily swapped with an Allen wrench. First attempt resulted in the Wahoo sideways. Redo to turn the mount 90 degrees for correct Wahoo orientation. This resulted in the GoPro mount to be 90 degrees out of position. Rotating the GoPro mount 90 degrees was also required. My bar is 35 mm and requires all the shims to be removed. The 31.5 mm shim is really nice and seems like it should be used, but it needs to be removed for 35 mm bars. Without shims, it mounts with no grippy shim. Hoping it doesn’t slip. All in all it works perfectly. All 3 Allen wrenches are required if you have a Wahoo. I’d give this 5 stars if my computer was Garmin. Having to fumble setting it up for Wahoo changes my review to 4 stars. Lacking instructions supports this rating. Quality, Functionality, Compatibility seem excellent. It seems really durable. I made the mistake of installing it on the lawn. Dropped the screw and gone forever. Fortunately my local HW store had a stainless steel M4x10 shoulder screw. That could be hard to find. Easy to drop. Be sure to install it on a clean floor to avoid losing a screw. It’s now ready to go. Time to ride.

Great mount. Took me a while to figure out how to change it over to a Wahoo mount, but it’s not rocket science. Great clamping mechanism and fits well on larger handlebar. Survived some rough gravel riding with a heavy light mounted. Very happy !

Light, easy to use and versatile. Love that I can have my Garmin Edge and a light on the same mount while keeping my bars clean and classy. I have 3 now for different bikes. Recommend 100%

Not much to say, other than it works as expected. Using this mount along with a tusita gopro adapter/mount for a light & motion headlight. Headlight comes off with 1/4 twist for charging or use it with another bike. I like this mount so much that I'm going to buy another one for my other bike. I did have to remove the black disc for garmin computers and replace with blue disc for wahoo computers, I'm using a wahoo elemnt roam. Also had to remove the gopro adapter from the red disc, turn it 1/4 turn, and reattach screws. Look under where it says product guides and documents for instructions, its a pdf file.

This has been great for biking , it’s compatible with my wahoo which sits at the top and my GoPro on the bottom (it comes with the garmin connector as well) This was easy to install and change out the inserts to use my electronics. I’m thinking adding a front mount led light that links into this setup next. I like that this is light and. I’m not a professional rider but we can at least have the look. I think I’ve only taken one fall since having this and everything stayed locked in and was not damaged

I have purchased 2 of these I love them so much. This mount allows me to mount my bike computer on top using the Garmin mount and my headlight under with a quick quarter turn GoPro adapter that was included. If I don't need the light, a quick quarter turn and the light is gone. No longer is half my handlebar taken up with all the gear. 1 simple mount to solve it all. After reaching out to the KOM customer support to order a Garmin disc to replace the one I broke, not only did they offer to send me one but I had an almost real time email conversation with them within hours of sending my initial inquiry. I won't ever hesitate to order another KOM product again with that kind of customer service!

Manchmal muss man sich fragen ob der eine oder andere hier noch ganz bei Trost ist. Der Herr „Elektro-Freak“ sollte vielleicht mal das Hirn einschalten bevor er so einen Blödsinn hier postet 🤦🏼‍♂️ Der Halter wird von Wahoo für den neuen Elemnt ACE empfohlen und dafür habe ich ihn gekauft. Passt hervorragend ✅ An die untere GoPro Halterung kommt bei mir eine Lampe für die Langstrecke, passt auch und die Lampe lässt sich nach einmaliger Ausrichtung zum Laden schnell entfernen ✅ Es ist ein schwarzer Garmin Halter vormontiert und dieser muss gegen den blauen Wahoo Halter getauscht werden. Da die Halterungen um 45 Grad versetzt sind, muss demzufolge die unterer GoPro Halterung auch gedreht werden. Und wenn man dann auch noch die mittlere Schraube der GoPro Halterung löst und die Hutmutter entfernt kann man alles ganz normal fest schrauben. Siehe Fotos. Fazit, nicht alles glauben was selbst ernannte E-Freaks hier und da schreiben, es passt und funktioniert alles. Zumal man ja schon auf seinem Foto gesehen hat , das er keine Ahnung hat. Ich schreibe nicht oft Bewertung, aber bei solchen vorherigen Schwachsinn muss man einfach intervenieren ! Ride on 😉

Struggled to find a holder that would hold both a light and a computer - this does that with easy. Fully adjustable to suit most handlebars. Unclipping your devices is so easy for recharging as well.

Loves the finishing and the steady but yet easy and flexible installation 👍👍👍👍👍

Bought this in the hope I could mount both my Wahoo Elemnt Bolt and a Knog Blinder light which has a GoPro attachment. This solution works brilliantly. It was a fair fiddle fitting it, but that was probably the price to pay for fine tolerances and a super-snug fit. It seems really solid plastic and the devices feel reassuringly well connected. I'm impressed.

Does what it says on the tin - attachment for a gopro / pronged mounted device (light, camera) with a quarter-turn quick release underneath and a conventional Garmin mount (wahoo insert included) up top. Arm is robust enough for a camera and my Edge 1040. Comes with 3 mini Allen keys, stainless or well-plated mounting hardware, plus rubber insert for 25.4/26mm bars. At least one review suggests the lower QR mount fits poorly - absolutely not the case with mine, which is rock solid.