StarTech 3FT USB to Type M Barrel DC Power Cable

This worked out great. Needed a longer plug for a digital clock. Would recommend.

I got this to work with a NewTrent Powerpack. This works with USB based chargers. I use this to actually power devices and gadgets also from the USB Charger. I have a Hak5 PineApple Mark IV, and this cable allows me to power it via a NewTrent IMP1000 Charger. Anything with a Type M barrel providing it uses low enough volts can be powered like this. Just how long is going to be based on the volts it requires, and what you do with it. The PineApple seems to require about 5 volts to run, and I can get about 1-2hrs use being mobile with a fully charged IMP1000. Now if I start to add items like a USB stick or 3G modem to the PineApple, then it greatly reduces my powering life. Overall the cable is made well, does what it should do, and opens the door for mobile powering and charging on devices that normally require an outlet for power.

muy bien

This replacement cord worked for my alarm clock, however the connection was not tight and loose fitting. It still worked, just be careful not to touch the cord after plugging in because it will become dislodged.

I purchased this cable in hopes that it would fit my SNOM 320 VoiP phone so that I may power it via my notebook computer rather than an AC outlet. The voltages and dimensions seemed to match, but I was still uncertain. Well, it fits perfectly and powers it via my notebook's USB port with no problem, even when my notebook is running off battery power. Just what I was looking for! While I haven't torn apart the cable, it seems to be well built with higher gauge wires and enough rubbery plastic on each end to keep it from wearing out from normal use. It measured in, as advertised, at just over 3 feet long. The model number for the phone's AC adapter is PSM11R-050, rated at 5V, 2A = 10W. The dimensions of the barrel fitting into the phone are: 2.1mm inner diameter, 5.5mm outer diameter, 9.5mm in length. Polarity: positive center ("tip") as seen in the common polarity symbol: ⊖−−−C⋅−−−⊕

My daughter got a record player and it didn’t come with a cord. This is a great replacement for just what it needed. Inexpensive , quick shipping. Plugged right in no problems.

One other reviewer said that it DID work with the Cradlepoint CTR35, and another said it did NOT work with the cradlepoint PHS300. I took a risk that: Cradlepoint would only use one size connector for similar products and that perhaps the second review was posted on the wrong item. Well I lost my bet. This item does NOT work with the PHS300, but I cannot speak to the CTR35. It seems that many people have been looking for a cable that works for this items... and as far as I can tell, it is not available. For some reason, Cradlepoint uses a connector with a larger than standard center pin, I would guess so that they can sell more changers rather than let customers have the conveyance of having one robust charger to all my devices.

I bought this to use with my CTR-35 Cradlepoint and I just wanted to confirm it works perfectly! My setup is pretty cool, I have a portable battery pack that I have and I use this cable to connect my cradle point to it, I then have my verizon aircard so I am able to have a mobile hotspot anywhere I go. I do also have a DC to USB plug for my car and use this as a mobile hotspot, but for example when I was traveling for work last week I brought my battery, this cable, and cradlepoint and was able to fire up a hotspot for everyone I was traveling with while we were stuck at the airport. One person had a Blackberry playbook connected, 3 had laptops and I had my laptop and Samsung Galaxy S2 connected. This cable is great for powering the CTR-35.