UTG 1PC Medium Profile Airgun Mount with Stop Pin, 1" Dia , Black

I mounted this on a Marlin Model 60 with a Vortex 3-9x40 with a 1” tube. It attaches firmly and works as intended. I love the one piece design as it gives much more surface area for clamping power. Great stability and very secure. Seems to be plenty high quality for this application. The price was great as well and was just what I was looking for.

Nice mount using it with a Hawke Vantage Scope on a Diana 34 EMS .22 Pellet Rifle. Make sure you use the STOP MOUNT SCREW so it does NOT move back because it will. The Diana has 3 holes to the rear so I am putting the mount on with the STOP MOUNT SCREW towards the end, meaning that the bolts to tighten the mount to the gun will be facing the left of the rifle as you look from back to the front sight. I am going to BLUE Loctite everything once I know exactly where I want my scope mount and scope. Seems well made. Good price, too!

Looks like good quality mount, but doesn’t fit my athlon 4x 14x40 scope, it probably will work for straight tube scopes. Won’t return it, doesn’t worth the hassle.

This is better than two separate rings. What I really like is that I was able to easily attach the scope to the mount and then slide the whole assembly on the gun's dovetailed grooves to get the proper eye relief. The mount clamps so tightly to the top of my Remington 597 that it feels like part of the gun. I don't know how it could possibly move if you tighten the three horizontal screws to 35 inch lbs. as per the instructions, but if it does, there is a pin that can be screwed down into one of the drilled and tapped holes for even more stability. The rings have a thin liner in them to protect the finish on the scope. With 4 screws on each ring cap, that scope shouldn't go anywhere. One issue: To center the scope over the barrel, I had to put the horizontal screw heads on the right side where my finger catches one of them sometimes when operating the bolt. The heads are 5mm tall so I may try grinding one down a little since they sent an extra screw. Another disadvantage could be weight. I measured the weight at 4.75 ounces on my digital kitchen scale. That's over twice the weight of the separate rings on my other gun. I'm going to think positive and say this reduces recoil and increases accuracy. We'll see, I haven't shot the gun since purchasing this mount but I can just tell it's going to be more than satisfactory. If not I'll update.

My Grandfather gave me his Remington 552 speedmaster .22 rifle. I remember going to his house in Arkansas and spending countless hours shooting that rifle over 35 years ago. It had a cheap scope on it but it never would shoot very accurately with the crappy Weaver see through rings that no matter how hard you tightened the thumbscrews, would never be very secure. It is difficult to find something good to bite into the shallow recesses of the dovetail on top of this rifle. I ordered this and it arrived last week. I refurbished the rifle and cleaned it up really well. She is now looks almost brand new. I mounted this on top and it is rock solid. The length of the blade on this fits the top of the 552 perfectly to maximize the amount of surface area that bites into that shallow dovetail. I mounted his original cheap scope into this unit and it is rock solid and this rifle has never shot this good. This is one of those rifles that I will never sell and it will be passed on to my son. This is after years of me thinking you had to spend at least $100 for a good set of rings and bases . . . I am just amazed at the price and the quality of the products being made by UTG.

Upon receiving this product and removing it from the package, I was simply stunned at how beefy it was. The manufacturer definitely didn't skimp on the screws. These screws were much larger than than what you will find with the UTG rail adapter (the screws were much too small, it sat canted on the rifle, and worst of all, it would slide a considerable distance with only 100 shots). The major plus in the design is that it has three screws on the base rather than two; this thing locks solid on the receiver. Another perk in its design is that it has four screws per scope ring; instead of having to over-torque two tiny screws per ring, you can apply less torque to each screw, but have an overall force greater than what is achievable with two tiny screws. Overall, this is a fantastic product, it does not feel cheaply made and due to the above qualities, grips the gun tight and will not slide! Also, as another commenter had mentioned, if you plan to use a scope with a 40mm objective with this mount on a Marlin 795, you will have sufficient clearance from the rear sight.

Works great!

I bought this to use on a 22 rifle that has a narrow dovetail. Google claimed it would fit, but I had to modify it to make it work. It is sized for a 3/8" dovetail and will not fit an older model JC Higgins narrow dovetail without a good deal of modification. It mounts a scope low and is very sturdy built.

Somebody said that these UTG scope mounts are made of some sort of case steel or iron. I'm here to tell you they are not. These are simply made of tough and rigid aluminum alloy. Absolutely non-magnetic, except for the machine screws of course. This mount as I received it came in a very sturdy container with full mounting instruction clearly written on it. I received all necessary tools ( 3 allen keys ) along with a supply of spare machine screws, in case I lose one. You simply wont be sorry for buying ANY UTG product, and this Integral Ring Mount is a perfect example of this. Nobody has even been regretful of buying a high quality product. My opinion is based on having bought and used many, many UTG products.

was recommended to use this exact mount for my Marlin 795. The Marlin 795 has a really shallow dovetail scope mount on the receiver, and with the cheapo rings that came with my scope, after a couple hundred rounds the rings had slid back on the dovetail, ruining any chance of getting a zero. I swapped them out for this scope mount with integrated rings, and it's been flawless. Ran my rifle through a Mapleseed shoot (like Appleseed, but the Canadian version), and have 1000+ rounds through it no problems now. It's held zero perfectly. Was easy to install, just has a lot of screws (but that's what makes it secure). Didn't even use any loctite, and it's been fine and solid.

Hubby here : This is an excellent mount. I ordered one last year for a Diana 34, just placed my order for another one. My scope doesn't move around under the heavy double recoil. The screws stay tight. The Medium height works out great for a 40mm objective and cover. ======= Update: I putvbone of these mounts on a Diana 350 Magnum Springer a year ago. Heavy double recoil. 2000 shots later, my scope has not mover, the mount has not moved. I hope they keep producing these. Very effective and affordable.

Quality construction. Mounted to Mosin Nagant as scout setup. Survived hundreds of rounds and holds zero. Worked well on hight powered airgun.

The mount, complete with anchor, fit the 11mm dovetail without issues. This product is well made and assembly is very sturdy.