Clear Sticker Paper for Inkjet Printer - 15 Sheets (8.5" x 11") Translucent Waterproof Printable Vinyl Sticker Paper for DIY Personalized Stickers Holds Ink Beautifully & Dries Quickly

This paper is great, I was hesitant because I read in some reviews how the ink smears. I tried it in my printer on plain paper with high quality and unfortunately the ink smeared quite a bit. I changed my printer properties to "photo printing" and "Photo Paper Plus Glossy II" I kept the print quality on high and made sure the page size was "letter". No more smearing, even after sitting for 5 minutes. I even tried digging my nail into the ink and did not smear. There is a hint of fogginess to the sticker but I felt that didn't make a difference.

Personally, I don't review many of my purchases on Amazon, but felt this warranted such. After researching these products and reading countless reviews comparing other brands, such as Avery, I chose this unknown maker. All the comments highly praised the product for its clarity and adhesion factor. My use is for labeling clear, resealable bags with detailed logo designs, so I desired maximum clarity to reveal the contents inside, but wanted strong adhesion so the bags could bend without the sticker material coming loose. So far, I'm totally happy with the material and will certainly continue to purchase. With my Epson XP-6000 inkjet set to 'high gloss' and super 'fine' print quality, also employing Epson brand ink cartridges (not off-brand crap), I'm now producing some extremely high-end looking sticker labels, right from my home office. The material is fairly thick, so invest in some high-end (Westcott) scissors to cut, located in the crafts dept at your local big-box store, especially if you're cutting circles, as I do. Also, allow the sheet to sit for 5-10 minutes after printing. You could probably rush, but why mess things up? Cannot comment on the ‘waterproof’ factor, but once dried, the ink is there to stay. If intended for outdoor use, you might spray with Krylon Crystal Clear Artist Spray after printed and dry. My customers have been super-impressed with my new packaging. Truly, the professional touch I was after! 09.19.25 UPDATE: Recently, I’ve found great results using some generic, non-Epson ink cartridges sold by MILEKO; they print fabulous on paper and these clear sticker sheets, at half the price. They had glowing reviews, so I gave them a go and have used them ever since, now over a year. Firmware issues might cause some an issue, but I’ve not been prompted to update, running MacOS Sequoia 15.6.1. Good luck … Peace!

This paper is good for starters and matches the price, in my opinion. At first, the ink was rubbing off of the vinyl but I found I needed to change the printer settings to "glossy paper" and that fixed the problem for me and the quality of the picture is always great. I use an HP Inkjet. Two things I wish I could change about the product is the stickiness, on the top and bottom. The stickiness after peeling the back off, is not too strong. It's not the type of sticker that can stay on clothes, for example. And if you're going to put it on a clean, hard, smooth surface, you have to do it immediately. If you reposition the sticker even once, even a little bit, it may not be sticky again. There's also a sticky film on top after printing on the paper. I'm not sure if it's the paper or the printer. I found that I could wipe the sticker with a damp rag and it's no longer sticky. The color would even be brighter, but the color would bleed off the sticker a bit because of the wiping. Overall, I think this is a nice option for starters.

Excellent value for casual sticker printing, easy to use!

I bought these waterproof sticker paper sheets and used them with my printer and cricut. They are as described. I stuck them to cups and they are indeed waterproof. They are also very sticky and leaves behind the sticker residue when I tried to peel them off. I bought the Matte, wish I would have paid attention because the shinny clear coat top would have been better for my project.

Hey, for anyone else who bought without checking, this stuff is transparent! It is see-through! It would be good for bold/dark colors that are going on light backgrounds. It does not work for what I needed it for, but I'm very impressed by the quality and will find other uses for it! I love how glossy it is! It has also stood up wonderfully to a primitive/cursory waterproof test (i.e. licking - I do not recommend this method). It also sticks to smooth, laser-cut wood (pictured), as evidenced by the fact that I cannot remove the stickers from that phone holder now.

Using a DeskJet 6988 I printed one sheet to test using a very simple design. The ink smudged when I pressed one of the dozen test images onto my motorcycle helmet. I splashed a very small amount of water on another to test and the ink came off immediately. The next day I printed the same image on an OfficeJet 9010. The results were much better. The image was brighter and far less prone to smudging. 24 hours later the image was indeed smudgeproof. Bottom line: results vary widely based on the make and model of the printer.

I love that this sticker vinyl is waterproof and prints with an inkjet printer. The ink does not smear at all even with printing at very high resolution. I have had very good results, but be aware that you should use printer settings for the highest gloss photo paper and increase the saturation to 100% to get vibrant color reproduction. I have an Epson Stylus R300 Photo Printer. To get the best results, I increased both the contrast and saturation to +25 (100%) and upped the brightness to +10 and the "Gamma" to 1.8 with Adobe RGB color control. Also, be alert that vinyl sticker paper does not print white, so whatever you stick it on, will show through the areas that are supposed to be white. I like to make decals that go on the inside of the car window. Just be sure to reverse the image before printing for this application.

ok

I go through at least 3 packs a month and love the quality stickers they produce. Will eventually fade, however you can add a sealant. I get about 6 months if I put these on my car.

Not clear at all. I would say 30% clear instead of 90%. Not happy with this product and It has been a waste of money because now I have to buy a different one

A fuir pas du tout transparent Et ne correspond pas au descriptif

Die Stickerfolie kam rechtzeitig an und die Verpackung war unbeschädigt. Ich hatte sie für die Gestaltung einer Tischlampe vorgesehen. Die Gestaltung funktionierte einwandfrei. Ich konnte die Bilder ganz leicht über meine Fotogalerie am PC ausdrucken. Die Qualität war vergleichbar mit einem Druck auf Fotopapier. Die Farbe verschmiert nicht und ist sofort trocken. Die Folie lässt sich gut zuschneiden und abziehen. Empfehlenswert ist ein weißer, heller oder durchsichtiger Hintergrund, da die Folie schließlich transparent ist und die Bilder auf dunklen Hintergründen kaum zu erkennen sind. Ich hatte außerdem Flaschen mit selbstgemachtem Likör damit beklebt. Da der Likör eine dunkelrote Farbe hatte, waren die Bilder kaum zu erkennen. Wenn die Flaschen leer sind, werden diese ausgespült und von innen mit einer Lichterkette versehen, dies wird einen schönen Effekt haben.