12V Integrated Brake Motor cycle Tail Light Turn Signals License Plate Bracket LED (Black Bracket Red Cover)

Good value for the money and works exactly as I expected. The brake light is plenty bright, although the running lights can get covered with dust and dirt and could be a bit brighter. No worry. Five wires = brake, running light, left and right signal, and ground. Easy to mount to the rear fender on a Coleman mini bike, but I would suggest removing the light fixture itself to make it easier to get to the bolts (then just re-attach).

It's cheap, so you get what you pay for. The lights work and the bracket is thick enough metal that it stands up to high enough abuse. The hardware (nuts and bolts) are junk and should be replaced. Use loctite liberaly if you do use the hardware, as it does loosen.With some slight bending, it fit on my tw200Holes for the license plate did not fit my plate, but this was fixed by drilling new holes.All in all, good peice with slight mods

My only gripe is that the plastic sheathing for the wires doesn't attach inside the housing so after install I was left with the colored wires showing out of the back of the light. I am going to have to tape it or find some sort of washer to seal it off.

Very bright, easy to wire, and great deal. Just know that if you don’t have a flasher relay in your circuit already, you will need to purchase one separately if you want the turn signals to blink. No complaints, I would buy again!

It’s a nice product I didn’t end up using it on my bike and I returned it because I didn’t need it!

I love it! Based on the reviews here on Amazon, I ordered 2 of these when I only needed one. They're cheap enough that this is an option. The first one I opened works fine, at least so far. It looks MAH-velouis! The smoke tint and clear LED's work wonderfully with my white with black trim motorcycle. When the LEDs light up in the correct color, that looks cool as well. Finally, in a tiny package you have taillight, brake light, white lights for the license plate, and amber turn signals. Seriously cool lighting for a dirt bike!As was pointed out, this nice clean looking package is NOT sealed ANYwhere. Bring your own sealant, Being all LED, very little current is needed, but you will need to use a flasher made for LED systems.I highly recommend this taillight to people who can design and fabricate their own wiring. They are so inexpensive I'd get two, one to use and one for spare parts. Do not get this expecting a complete working solution.

Wired it up everything worked as it should went on a ride and like after 20 mins lights started failing by the time I got it home no lights worked tested all my wires and had power going to the lights just light would not work led s would not light at all

Followed the picture in the purchase, wired everything up, looks great! Brake light worked, has a nice bright red coloring to it and is easily distinguishable in the sunlight too! HOWEVER, turn signals were wired in reverse... Left (white) turn signal ended up being Right.Right (Yellow) Turn signal ended up being Left.Now this isn't an issue having been used to using this kind of mess-up due to my own wiring mishaps but it's certainly not something I was expecting from a company... hopefully this is one of those flukes that don't happen often... otherwise though the tail light is great!