RealTruck SUPERLIFT SUSPENSION Dual Steering Stabilizer Kit for Ford F-250/F-350 | Shadow Series Cylinders | 92625 | Fits 1999-2004 Ford F-250 / F-350 / Excursion 4WD with 3" of Lift or More

Installation pics are not clear! However I was able to locate the instructions online. That allowed me to expand the pics so that I could make an uneducated guess on how the Stabilizer Kit should be installed. Otherwise the kit is well built.

I'm mechanic and have been for 15 years. I had the death wobble in my 16 f250. I went thru my whole front end and couldn't find anything damaged. Second guessed my self and took to another mechanic that I refer people to. He could not find anything wrong in my front end either. I ordered this with bilstien stabilizers. The death wobble is gone. My truck fills brand new again. Installation. Was extremely simple and easy. About 45 minutes while goofing off. 100% recommend this product.

Has eliminated the Ford Death wobble

Everything was great except the u bolt does not fit a f350 ,it was not long enough, not sure if I got an odd ball u bolt in my kit ?? But something to keep in mind 👍

I purchased this kit to install on my 2022 F250 (7.3 gas, if that makes a difference).Pros:1. Easy to install.2. Inexpensive.3. Functions as intended.Cons - I received 2 kits, so the below comments are consistent across the kits (except #1):1. The first kit that I received had 2 of the same part - both for the driver's side mounting bracket. For the install, you need a driver's side and a passenger's side mounting bracket. Amazon was helpful with this, as they sent me a new kit, which I took the passenger's side mounting bracket out and used it.2. The stabilizer cylinders are NOT as pictured. They are not the white SUPERLIFT brand. They are a no-name medium gray cylinder. The kit comes with "shadow" stickers that you can put on the cylinders if you desire.3. The u-bolt that holds the main center bracket to the axle is too short - at least for a 2022 F250. The diameter of the u-bolt is fine, and it fits around the axle - however, the bolt itself is too short to where you do not have enough threads to tighten the nyloc nuts all the way.4. More of an annoyance - you do not get the dust boots in the kit. Those need ordered separately.5. The directions are lacking. If you are mechanically inclined, it's easy to figure out - but certainly not spelled out or easy to follow.

My 2019 f250 had a shake in the steering wheel. it was not fun to drive. after a couple of single stabilizer's I bought the dual stabilizer's and my truck drives like a new truck

Fit perfectly on my level lifted ford f250.

Great shock , bracket system could’ve been great but I was sent two same side bracket. So I had to cut and fix the driver side bracket …. All and all I made it work . I’ll coat the cut bracket later on .

in the item description it does not say that it is made for a 3" lift i had to made some modification for it not to hit the frame in the installation paper work it says that it is made for a 3" lifted truck

Overall great kit i like the way the shocks are mounted in comparison to other kits. The shocks are legit bilsteins and not superlift branded ones. But the ubolt for the axle tube could be another inch longer. Anchors well to the axle housing using 2 diff cover bolts and doesnt interfere with my 2.5" leveling kit and aftermarket trac bar.

Great kit this kit comes with the dual bilstein steering stabilizer shocks and all the hardware necessary to fit your super duty 10/10 love it

Took the shake out of my wheels when hitting bumps in my 2019 super duty