URBAN ARMOR GEAR UAG Designed for OnePlus 8 Case [6.55-inch Screen] Plasma [Ice] Rugged Translucent Ultra-Thin Military Drop Tested Protective Cover

This is a really good armored case for my OnePlus 8 Pro. The phone is all glass and the case gives me peace of mind, because I am a phone dropper. The case is drop tested 26 times and it's built like a tank. The hard polycarbonate shell is permanently attached to TPU, which surrounds all the edges and corners of the case. The phone never touches the back, edges, and corners of the case. So in effect, there's kind of an air cushion between the phone and all sides and edges of the case. The huge camera bump of the phone is protected very well also, recessed into the case's opening, surrounded by that nice soft TPU material. The only complaint I have about this case, and it's probably a minor one, is that the TPU material surrounding the alert slider is very thin and seems like it might eventually break. I wish UAG made that part polycarbonate instead of TPU. That way it would be more sturdy. But so far that part and the rest of the case is holding up quite well. I've been using this case for almost 3 weeks now and I love it! It feels great in my hand, and I have no doubt that it's going to protect my phone from my clumsiness. It doesn't add too much bulk to the phone, as other armored cases do and is aesthetically pleasing to my eyes. It's a bit pricey compared to other cases, but I wouldn't hesitate to buy this case again. This is money well spent to protect my $1000 investment.

You just bought a $900+ phone. Are you really going to penny pinch on a case? It's comparable if some mobile store salesman sells you a case in store. I've used UAG in the past (Samsung Galaxy S3) and really loved it but haven't had a mainstream phone in a long time that UAG made a case for so I was stoked when I could pick one up (Spigen is what I used instead for 3 phones in a row when UAG wasn't available for my past devices). The case is thin but light. I got the ultramarine blue so I wanted to see the blue through the case and it works nicely. The case that comes with the phone hugs the phone curves a bit better but I like the more rugged look of this case; in fact I think that's my favorite part. You see all these people with pop sockets and I don't want one of those but I do want an easy way to hold my phone. This case adds some slight ridges to make it easier to hold. That might be a selling point for some people... I don't think this case would work with a pop socket. At the very least the whole adhesive pad wouldn't adhere to the case without some creativity - I wouldn't recommend using a pop socket with this case. My only (minor) complaint about the case is the rubber part over the notification slider is pretty thin but I think that's more due to the phone design (curved screen plus the slider) than the case itself. That's why I docked a star for durability. If and when it fails, it won't really affect function of the case since the corners would still be fine.

I have been holding off on providing my review since I purchased this case 3 months ago, just to ensure that I have had enough hands-on to render an appropriate review. Overall, this case is fantastic and meet all of my needs. Using this case barely increases the profile of the phone, it is hardly noticible (the OnePlus 8 Pro is already a bulky phone). Additionally, I enjoy the fact that it is clear, as my teardown skin is proudly displayed and is a talking point about the device. The raised bumpers have already saved my phone from numerous drops, and extend past the surface of the screen in case it falls screen-first. The cutout for the slider allows easy access to change the notification settings. I have seen in other reviews that using this case prevents wireless charging with the proprietary OnePlus Wireless Warp Charger, however, I did not purchase one and utilized my Anker wireless charger for the duration of owning this phone. Once again, a fantastic Case at a fantastic price.

This case is outstanding in almost every way, with one big caveat. This is an outstanding case. It really is, and I love it. It feels great in the hand, it's durable, well constructed, and looks good. I can still see the back of my phone, which is nice. Overall, I'm quite satisfied. If you don't care about wireless charging, GET THIS CASE. It's the best one available for your OnePlus 8 Pro as of my writing this. If you care about wireless charging, that's the big caveat. The issue is wireless charging. The item description clearly says it will not interfere with wireless charging. It most assuredly DOES interfere with wireless charging if you're using the official OnePlus Wireless Warp charger. I can charge my phone with no case and it easily pulls 4,500 mA and charges every time I set it on the charger. I put this case on and most of the time, it fails to charge at all. When it does, I get anywhere from 100-1500 mA. If it charged at 1500 reliably, I wouldn't even note it. But it doesn't. I put the phone on the charger in a normal, natural way 20 times. 17 times, the phone failed to charge. 1 time, it charged for approximately 5 minutes and stopped. The other 2 it charged until I took it off the charger. The case has a great protective design that, by necessity, moves the back of the phone away from the surface it's resting on or against. That seems to be the problem when using the Warp Wireless charger from OnePlus. (My guess is that it's very sensitive to distances because of the higher power output, vs. a standard Qi charger. Pure theory on my part.) I tried every position and adjustment I could think of. I found if I positioned the phone absolutely perfectly and canted it JUST right, I could get it to charge 75% of the time at a low rate (~1000 mA). That's still far from ideal. I took the phone out of the case and it charged at full speed, every time. If it was on the charger perfectly, or slightly offset, or canted- it didn't matter. NOTE: THIS MAY ONLY BE AN ISSUE WITH THE ONEPLUS WIRELESS CHARGER! I don't have another one to test, but I suspect a normal Qi charger would work just fine. Unfortunately, the flagship charger (marketed as a selling point of the phone) does not seem to work reliably with this case. TLDR: If you don't care about wireless charging, get this case! If you DO care about wireless charging, be aware that you will likely have problems with the official charging station. Other ones may work fine.

Great product

Muy buena calidad, se ve muy resistente y protege la pantalla y la cámara perfectamente

Tengo esta funda alrededor de un año y medio dos años y sigue intacta y se me ha caído desde todo tipo de sitios y a alturas considerables, es cara pero merece la pena

I got the case for ₹1129 in a lightening deal and was a value for money offer according to me. The case fits perfectly to the phone and even the type-c port area is perfectly cutout. I liked the overall sturdiness it gives to the phone while holding. Added weight can be a pain sometimes but its worth it.

Well it's uag we are talking about. Best in the game for smartphone cover. Pro: The cover fits perfectly fine. Has a raised lip to it so device screen don't touch the surface while sitting face down. Well built and looks rough. All cutouts are there and works fine without any interference. Cons: One "fancy way to turn your device into BRICK" Adds too much bulk and thickness to device ( thicknesses is there for protection Yes I know) Alert slider rubber is delicate might get broken if not carefully handle. Price is bit high at 1.7k could be better if priced at 1.2 to 1.4k

Excelente funda, es muy cómoda, protege muy bien el celular y es bonita. La verdad la recomiendo por encima de otras marcas UAG para mí son de las mejores marcas de case