SURE SHOTA1000R 1 Quart Enameled Steel Sprayer, Red

These are awesome! I have 3 now. I can fill each one with a different liquid, label it, and it stays pressurized and ready to go for weeks. refillable, re-useable, an excellent choice. I have saved hundreds of dollars using these - they pay for themselves! The function is easy- just press the lever- the spray pattern is extra fine, they come in multiple colors, easy to use, a bit pricey but worth it, I just wipe the outside off, I have never had to clean the inside out.

Brake parts cleaner is a must in any auto garage. Buying it in a five gallon can is much cheaper per ounce, and you won't have cans everywhere and filling your trash/recycle bin. Using a cheap siphon bulb between the can and the sprayer makes filling easier. While you can't see inside the can very well to see how much you filled, you don't have to be exact. Just leave at least a 1/3 of the can for air. My advice would be to buy the adjustable spray nozzle they have to get just the right pattern you want. The one it comes with sprays too fine a mist. Taking the pin out of the center results in a powerful stream, but the adjustable nozzle lets you quickly get just the right amount of force and coverage. I'm using way less solvent to clean new brake rotors, and the can stays pressurized until you need it. I generally pump mine up to a little over 50 psi and it works great. I also bought the filling cap with the bars to make it easier to remove without a wrench, and the 6" extension pipe so I can get the nozzle closer in tight spaces. Very sturdy, well-made, and doesn't tip over. Not cheap, but you are truly getting what you pay for here, and made in the USA.

Bought one of these a year ago as a way to replace the many half empty cans of carb cleaner in my garage. Very impressed at how this performs when filled with Naptha and used as a carb/brake cleaner. Just about paid for itself in a couple months with money saved buying solvent in bulk instead of by the can. Would recommend removing brass diffuser from nozzle for more direct spray pattern. Built tough, has survived many 6 ft drops and still holds air over weeks of storage. So impressed with it I bought one for my grandpa and dad!

This thing is great for many (not all) of the chemical spraying uses. I really like that you can put a bunch of Brakleen in and pressurize. Doesn't run out in 30 sec like a can of brakleen. The only thing I am not 100% happy with is the spray tip. It seems to only have a mist spray, no jet for spraying distances (like down a tube). There my be a solution that I just haven't seen yet. But it is really well built and I am super happy with it.

I use it for my own blend of penetrating oil. I recommend getting the extension hose to make it easier to spray those harder to reach nuts and bolts. We'll made. Holds pressure for at least a couple months in between fills.

This sprayer is still made the same as the one my grandfather used in the sixties and the same as the one my dad bought back in the seventies which got run over a few weeks ago by a dozer. It wasn't damaged bad enough it couldn't be fixed but it would have required welding a complete bottom back in it. This ones price was way less then the time it would take to make the old one work and it would still be an old one. As long as you don't use a water base liquid in these they last 30 or 40 years. Plus to can purchase different nozzle's or spray tip for different purposes. We use it for spraying PB Blaster. We buy that stuff in bulk but if you drop a spray can of Blaster it will 99% of the time land on it's spray nozzle and the can may be full but it's ruined. We relieve the pressure in the can and pop a hole in the bottom and poor it into this Sure Shot sprayer. Works perfect and on top of everything else, it is 100% made in USA.

This container is so handy! I have saved so much money on brake cleaner since I’ve owned it. It always sprays well and is easy to fill. Bought a gallon of brake cleaner and have only filled it twice while using it constantly on my projects for about 6 months. Definitely better than buying spray cans. Highly recommended!

I first bought a Harbor Freight sprayer very similar to this Sure Shot. I wanted 2 sprayers. I ordered this Sure Shot for twice the price, thinking it would be premium to the HF sprayer. Not true. I actually like the HF sprayer better. It has an adjustable spray nozzle where as this SureShot is just a wide pattern spray only. The HF sprayer has a threaded air valve that you can screw a trie valve cap onto it, the SS is a slick stub, no threads. Both work well, but for the money, I recommend the Harbor freight sprayer for almost half the money