Glass Bottle Cutter Kit, Bottle Cutter DIY Machine for Cutting Round, Square, Oval Bottles and Mason Jars, with Pencil Glass Cutter Tool Kit Gloves Fixing Rubber Ring Hemp Rope Sanding Paper for DIY

A novel device for crafts and it does the job it was designed to do perfectly. For such an affordable price you get a lot of kit. Included are screwdrivers, manual glass cutter, gloves, extra cutting blade, a glass hole drill bit, sponge brush, rubber rings, glass hole saw and sand paper. That's on top of the jig itself.The jig is easy to set up and easy to change or move parts. Most bottle sizes will easily fit this jig and I've tried on a few with very positive results. Only smashed one bottle so far and that was my fault. The instructions make it clear how the cutting is achieved and it's easy to follow and do right. It's a great item for fun or crafts. There's plenty of nice items that can be made from empty bottles such as lights, money boxes, glasses, vases and candle holders.Overall this is a really fun item, what you do with it is only limited by your imagination. It's ideal for crafter's and diy enthusiasts. I'm really pleased with it.

Took a few shot,s to master it but the bottle cutter is still working well so yes I would recomend it.👍

This item arrived safe and well packaged.I love a good craft project! I do try my best to create things for my house and garden wherever I can. And hopefully with this tool, I'll be able to add another skill to my range! Although I have only had the chance to use it once, I am already impressed by what it can do.There has clearly been some well thought out design put into this. The device has been put together to make it as easy to use as possible. And everything you need is included. Even down to rubber bands and gloves etc.The only thing you need to add is a dribble of boiled water!As this upcycles glass bottles, this is a very environmentally friendly gadget... It can give new life to empty glass bottles and jars etc. I hope to make a new full set of matching drinking glasses very soon!I highly recommend this product.

Will not cut in a straight line.Or quality asterisks. Half the nuts now will not tighten.Do not buy.

Not as easy to use as the video had shownFound the item a little bit unsteadyThe rings can only be used for very large bottles so not able to use any smaller ones

Arrived ok all intact tried my first and couldn't believe it worked it wasn't quite a straight line but managed to rub it down with the sandpaper the second one did crack a little so it's trail and error . Just need to plan what I am going to make for the garden out if these bottles

All the items were there but it doesn't work to well.Went round the bottles consistently with even pressure going backwards & forwards with the water etc as instructions say.Out of 5 bottles only 1 is usable but only just, 30 minutes of sanding to level & smooth the edges.3 hours wasted

- My success rate is 15% after about 40-50 bottles, so don't start with your favourite ones.- Assembling is easy but definitely watch a video to understanding this better: only need one consistent depth and uninterrupted line to cut, don't go over the same area again.- Only for round bottles without too many etchings.- I'd say this is dependent on bottle quality, also beer and wine are much easier than thicker ones like gin. It does work eventually.- you may need some diamond files, if you're making glasses - sand paper it not really enough.

I'm a beginner using this glass bottle cutter and I must say I'm impressed. I rather the kit rather then just the cutter itself as you want to cut the bottle the right way.

conjuguer avec un dreymel ou semblable on arrive à travailler le verre boîte complète correspond bien au contenu vendu

Anyone rating this less than 3 stars is doing so because of user error. That said, the instruction are kinda inconclusive so it's going to require some critical thinking skills to get right.I only got this wrong once, on my initial try so let me leave some best practices:¹) When setting up the rollers and scoring wheel, all you need to do is lay the bottle down and adjust until all roller wheels and the scorer touch equally. Take the bottle off, tighten everything but the scorer. Raise the scoring wheel 2mm then tighten.²) The L bracket you attach to the rear that folks find too flimsy is guaranteed user error. Think about the pressure when the bottle is pressing against it and then realize the first tightening knob needs to be as forward as possible to minimize flex.³) Speaking of pressure. Once you are ready, use both hands to apply even down force on the bottle and then slowly rotate the bottle allowing yourself to hear the scoring wheel doing its job. Do not try and use the L bracket as a be all end all stopper or it will flex and you wont have a clean scoring line.In the end that's what you want to achieve - a single scored line. You dont want to rotate fast... the average bottle should take around 20-30 seconds to rotate only once. Just keep a decent amount of pressure with both hands rotating the bottle inward (if the bottle was free it would roll towards you, not away is the correct direction to roll it). The second the scoring line matches back up your hear the scoring wheel scratch the glass in a new way. You're done.Now I didnt follow their directions at all for much of the actual water finish. What I did was place both rubber gasket bands next to each other instead of sandwiching the scored line. I placed them between my hand holding the base of the bottle and the scored line within less than a centimeter.I used the bands as a way to block the hot water from running down the bottle onto my hand. Now the water itself. I filled a kettle and got it almost to boiling (steaming a lot) then ran a large plastic bowl under my faucet with cold water constantly running into the bowl. I would slowly pour hot water onto the scored line counting to 20... the rubber bands blocking the water from running down the bottle to my hand holding it. Then I would stop pouring the hot water and the put the scored line section under the cold water for 10 seconds. Then back to pouring hot water for 20 seconds. I only needed to repeat once for it to work every time. The bottle splits and falls into the plastic bowl safely.I then use sandpaper I bought and do the wet method with the sandpaper covered in water at all times to collect any glass dust. Make sure you apply enough pressure here as well. 80 grit until the bottom is flat and dull, but the edges are still jagged internally and externally. Then 150, then 220 then 400.... after 400 you could stop and go on to repeat for the inner and outer edges... that is sufficient to be safe, but I continue and do 1000 and then finally 2000. Once that is done, repeat the order for the inner and out edges.The photo here is of my second glass I attempted. It has soap only because once I took the top off I realized there was green mold and had to wash it... which was a bit dangerous since the edges were brand new. I'm including the photo to show exactly what that scored line should look like.This is a great starter kit - get it!You'll have a professional lip in about 20 minutes for every glass if you are diligent and dont pause much.

Die Lieferzeit ist etwas lang, aber auf Grund des Herstellers akzeptabel. Was nicht stimmte war die Anlieferung. Die Zustellung war bei der Sendeverfolgung als Auslieferung mit Datum und Uhrzeit angezeigt, obwohl ich zu diesem Zeitpunkt anwesend war. Erhielt ich dieses Produkt nicht und es erfolgte auch kein Hinweis im Briefkasten. 3 Tage später erfolgte ein Hinweis im Briefkasten, das das Produkt auf der Poststelle abgeholt werden kann.Die Funktionsweise ist im Internet gut beschrieben. Doch zwei Teile sind dabei, welche dort nicht beschrieben wurden und ich deren Anwendung und Anbringung am Gerät nicht nachvollziehen kann. Für mich nicht von Bedeutung, aber Interessehalber gut zu Wissen.

The item was exactly as I expected and delivery was timely.