K5 PRO 10g Viscous Thermal Paste - Compatible with Apple iMac, Asus ROG, Acer Nitro, MSI Laptops, RTX 3080, 2080TI, 3090, PS4, Nintendo Switch, Xbox

This was a game changer for my gaming laptop. It worked great on my Predator laptop. My laptop would overheat while playing games after a while. I took it apart, cleaned off all the old stuff, and later applied this. My laptop stopped stuttering when it got hot and so far hasn't turned off from too much heat. I kept an eye on the temperatures and it stayed consistent the entire time. :)

This is a great thermal paste for larger gaps. I wouldn’t use this between a processor and heatsink where the connection is very tight, but it is great for transferring heat in areas without tight connections. As an example, I have a Nintendo Switch that is about seven years old and was suffering from a dying, puffed battery and a loud, clearly dying heatsink fan. I followed an iFixit guide and took the Switch apart, and they recommended using this compound between a heat pipe that leaves the processor, and a large metal plate that goes across the back of the processor for heat distribution. The gap is larger there, and the old thermal paste that Nintendo had used was dry and brittle and crumbling, and I replaced all of it with this one. (For the processor and heatsink connection itself, which is tight, I used a different product, Arctic MX-6, which is what I use for all my desktop computer CPU installations). I have had zero issues with any over heating in the months since it has been applied, and we use our Switch heavily. I can feel the heat spread evenly across the back of the switch, so it is clearly doing the transfer between the small pipe and the larger plate, just as expected. I think this is a great product and would definitely recommend it.

Swapped the fan in my V1 Switch and decided to remove the old thermals and replace them. This paste was specifically used to replace the factory "red paste" (see my picture) for the metal plate that runs along the entire back of the Switch and connects to the copper(?) pipe. The red paste is (and needs to be) thick so this paste was a great replacement. Very integral as that metal plate disperses the heat evenly across the entire back of the unit and the paste acts as a bridge between the components and the metal plate.

Easy to use and quality. Bought this to change the bulging battery on a first gen Nintendo switch.

Used this on my 5 year old laptop when I dismantled the entire heat sink to clean dust trapped in the fans. I didn't make a mess, but the stick applicator is not my favorite. It felt like I was running out when I finished repasting, but I put way too much. (It was my 1st time repasting, and I didn't know I overdid it until I put the heat sink back on). The old VRAM paste wasn't dried out / cracked either; I only used this product to prevent trapped air bubbles.

My first time using this product, successfully eplaced several thermal pads when repasting ASUS ROG laptop. Watch some videos if you haven't used it - if you try too hard to be neat you are going to make it much harder for yourself. However viscous you are thinking it will be, it's more than that. 100% glad that I watched a couple vids first to see just how sloppy people were being with it - would be very difficult to be neat with it IMO. The directions also tell you not to worry about it, but I still wouldn't have been as free with it as needed if I hadn't seen it.

It was easy to apply when replacing the midframe on my kid's Switch. The included stick was nice to have.

Needed replacement paste for the heat shield when I replaced the broken card reader in our Nintendo Switch, I've had no issues with the Switch overheating so it seems to be doing it's job!

This is not a CPU paste. Its for making thermal bridges between electrical components and heat-sinks etc. I use this mainly in LED lighting applications between the LED and heatsinks. Greatly improves reliability. I have also used it to improve thermal bridging between batteries and thermal sensors (overheat protection role). Is a paste, and quite thick, little awkward to use sometimes but. if you have a joint between electronics and a heatsink / case etc to fill, this is great.

Justo y necesario, buen producto. SPOILER: Es un fastidio colocarlo 🤣

You will never regret buying it, performance is top notch, Not a thermal paste but thermal putty usually we this is for Vrms (pc , best for laptop, ps4 ,ps5, Nintendos and all). Bit expensive, hard to get contact with sellers, delivery is late hopefully K5 pro team will look into the matter and solve the issue, this much overpriced was not expected but again best product. Completely solved my purpose of fixing the temperature of Acer Nitro 5 AN515-58 Vrms, in CPU and GPU die I had used liquid metal. Quantity vs price: Quantity is less Easy to use. Edited: Currently price is too high, Please don't buy it until it becomes cheaper , I purchased it in high price itself that was 2300+ INR now it's more expensive, Only recommended if the price is under 2200 or something.

doing what supposed to do

Je l'ai utilisé pour remplacer des pads thermiques, facile à appliquer pour des modules mémoire, suivez les consignes d'utilisation et ca devrait faire son effet !