Naviskin 10 Optional Colors Available 3-4 Bow 13 Different Size Bimini Top Cover Includes Mounting Hardwares,Storage Boot with 1 Inch Aluminum Frame

This went on my H22 Xpress Bay Boat. With the existing side height, I have about 74" of overall height under the bimini. Comes in sections that need to be assembled. Port side in one plastic bag, Starboard side in another bag. Bimini top packaged by itself with the directions in the same bag. I laid everything out on top of a tarp in the driveway then assembled one side of the frame. The biggest mistake I made was having the bimini upside down. The fix was easy and took about five minutes turning the bimini over. I stalled the whole thing on two 2x4 studs (mimic the side rails of the boat) so I could set those on the side rails of the boat and slide the whole thing back and forth to come up with the exact install location. Having never done this before, I wanted to make sure the center console/seat area is well covered but the rear fishing seat area is not obstructed. Pros: it is a cost-effective bimini compared to many others. Two choices for mounting - I used the rod/pole piece in the rear and adjustable straps in the front. It was ok up to 30MPH. Comes with a zippered boot that fits well. Cons: anything around 15MPH and above makes the top balloon upwards. It's a physics thing - same thing that makes planes fly. The pockets for the middle two bows should have gone from end to end. They don't . They end about 12 inches in from the sides. By doing that, the top balloons a lot more than it would if the pockets for the bows went all the way to the edges. This is a tough thing to describe.

Quality top for my little fishing boat. Assembly was simple, you're going to need a drill and a bit for drilling a few holes but its easy to drill.... not nearly as stressful as I thought. Took about an hour to unbox, put it together, and mount it on the boat. Its very stable and sturdy, water literally beads off of the canvas and rolls off.... and it blocks the sun really well. The instructions that come with it are very clear. I can't believe I didn't get one sooner, I've spent years frying in the sun on my fishing boats.... this is worth every penny. Had it out in the rain this weekend.... kept me dry.... works great. I will come dig up this review if it falls apart quickly or breaks. From what I can guess, this top will probably do many seasons.... I'm gonna keep it on there until it's tattered and ridiculous looking. Hopefully that will be a while from now. Quality material.... decent price.... I recommend it. The only thing- Mounts and some hardware are a hard plastic material.... doesn't seem to be cheap plastic.... if top breaks I could foresee it would be one of those pieces of plastic hardware. But they seem to be made of strong and sturdy material, hopefully they'll hold up.

Everything is figureoutable. We wanted a second bimini on our 2018 Sun Tracker Bass Buggy 18 deluxe. Didn't want to drill into the rails and came up with this solution. This bimini is a great price and allowed us to modify it with railblaza products to make it work.

Nice awning. Just be careful when tightening straps. You can pull the stitching loose.

Overall the reviews on this were helpful in my decision to purchase. My boat is a 1995 Lowe Deck Boat 22'. The original top was so faded and the frame was old and made the boat look old and worn. This top fit it perfectly. I got the largest 4 bow available. The instructions aren't as good as they should be but if you are handy at all, you can figure them out. The hardest part was getting the front frame and rear frames for each side positioned correctly and bolted together correctly. The product is well packaged for safe transport. The fabric seems to be a little thinner (?) but I don't see that as an issue at this point. I suspect it will hold up as well as can be expected considering the hot Virginia summer sun that will hit it all day while boating. The stitching is well done. The positioning of the bow sleeves is pretty exact so the top stretches out nicely with up - no tugging or distorted alignment. When placing your deck mounts just be sure to measure them so that are equal on both sides. The frames are sturdy and snap together easily. The top bows are curved slightly giving a nice finished look overall. All the hardware was fine and they even include an extra spring snap clip and extra tapping screws. I like this Bimini top enough that I'm ordering a second to place over the front of the boat to cover the seating area up front too! For the money, you can't go wrong with this top, IMHO.

It looks good. It was installed on a 1999 Bass Tracker 165 Pro. Fit was good, and the installation time was about an hour for two people. Just measure each side the same way. Make sure you drill the pilot holes to the correct diameter. I had a screw break while installing it. Luckily, it was still sticking out, and a pair of vice grips worked to remove it. Otherwise, it was a perfect install. Watch a few videos if you’re not sure how to do it. The instructions are lacking in information.

This is the best bimini I've found for the money. I used this all summer on my Alumacraft fishing boat and it still looks and functions like it is new. I would definitely buy again.

Fit great was easy to install

Cumplió con todas mis expectativas, es un buen producto, quede muy contento con mi compra gracias