Paddsun6.1" Touch Screen Digitizer Glass Panel Fit For 2014-2016 Toyota Corolla Camry RAV4 Prius C Navigation Radio Monitor Climate LCD

Worked like a charm. Takes about an hour, saved me on replacing an entire head unit. 2014 Camry SE. Would recommend.

Ordered this part for my 2014.5 Toyota Camry LE. Common problem where all the buttons on the radio and steering wheel stopped working and the touch screen stopped working. After a lot of research found that this part should fix the problem. Followed videos on YouTube to replace and everything works good as new.

Digitizer appears well-made, installs easily and properly in place of the original one and works so far while solving the dreaded touch issue.The hardest part in replacing the digitizer, was removing the radio system from my Corolla (2014). Ratcheting wrench with extension is a must. Some of the bolts were torqued to a such a degree it was impossible to remove with a mere screwdriver. Also make sure to cover the area underneath with a soft towel to prevent scratches while you unplug all the wires from the radio system, as it has some sharp metal in the back.Opening the radio itself is somewhat delicate and time consuming procedure as you must carefully detach the wiring and remove the components to get to the screen.Some people have mentioned that they were confused as to which side of the digitizer is supposed to go where in the older reviews. Perhaps the product has been updated, but it is very clear how to properly orient the panel. First, the digitizer panel has a narrow double sided tape running along the edge on one side to attach the seal piece that sits between the digitizer and the LCD. Second, you can see on which side the wire is coming out and compare to the existing digitizer installation.The most infuriating part in this is that Toyota is charging 1000's of dollars to customers to replace their defective radios, while probably taking the defective one, refurbishing them for pennies on dollar and reselling to the same unsuspecting customers.

I had high expectations. I was initially reluctant to take on this project, but I watched a YouTube video and followed it to the T. I took notes, watched it over and over, kept my tablet with me to go over each step carefully.This was a total bomb. While I can see the display and the rear camera still works, there is absolutely no ability as touch screen. Moreover, even the buttons on the steering wheel work eraticaly. While I used to have some capability with the old, this doesn't work at all.

The screen was exactly as described and works perfectly in our 2015 Toyota Corolla. Installation was easy if you are comfortable working on minor car maintenance and electronics with ribbon cables yourself. Fits exactly like the OEM screen that had a failed lower section.

This has been working perfect for almost a year now on my 2015 Corolla Radio that the oem screen had dead spots in it.

On my 2014 Corolla S stock radio the buttons on the lower half of my screen were unresponsive for a long time which wasn't a big deal until I had to connect a new phone. This apparently occurred due to the summer heat that we experience in Central California. I debated to do this repair or just change the radio entirely. After some thought I decided to try this first. After all, it's only $16.99. I received it fast and installed it on 29 August 2024 and it did work. Here's what you need to know.** This does take some patience and skill. Do not rush. Also watch the following YouTube videos before even purchasing.1. How to replace or fix 2014 2015 2016 Toyota Corolla Entune Radio Touch Screen Panel Digitizer. By Jervis Tan.I followed this video to remove the panels and radio, then realized that the radio in the video wasn't like mine. This is a great walk through in removing the panels and radio. Once the radio is out you'll know if it's like yours or not. If yours is different move on to the next video.2. HOW TO REPLACE A Touch-screen ON NON-RESPONSIVE A 14 15 16 TOYOTA COROLLA GPS Navigation APPS. By C & H CAR STEREO.This video is the walk through that I followed to replace my digitizer and is spot on with every step.** During my research I noticed that a lot of people didn't disconnect their car battery. Anytime you're working on electrical items in a car, always disconnect the car battery. Also press your horn for a few seconds to discharge any residual power.** I saw a review that stated that this product wasn't glass. The one I received felt like glass.** After removing your old digitizer, be careful with the new one. Mine had a gold frame on the outer edge on one side, that side faces the radio and screen when you put it all back together. You can install this backwards and if it is it will look good, but noting will be responsive which can lead you to believe that it's bad.This digitizer fixed my issue and worked flawlessly!Update 5 November 2024: I was about to write a 5 star review for this product since it was working properly and I was very impressed, but on 3 November 2024 the digitizer all of a sudden stopped working. Nothing responds and my steering wheel controls won't even communicate with my radio any longer. I left it with 4 stars because the product did worked great for the time I've had it. Not sure about the longevity. I'm not going to attempt to get a replacement, I'm just cutting the loss and upgrading my radio.

It was easy to install. I have a Toyota Corolla 2015 and my husband was able to replace it.