JETech Tablet Stand, Adjustable Portable Desktop Holder, Foldable Dock for iPad/iPad Pro/Air/Mini, Galaxy Tab A8/A7 Lite/A7/S8/S7, Kindle, Tab/Phones(4-11"), Sliver

I like this product. Compared to others, it is small-sh, meaning about 3" high and 4 inches wide. It has rubber pads at the top and bottom which helps to grab and stabilize the electronic device. It is solidly built and the aluminum seems of quality and I don't think it will scratch easily. The bottom allows for the access to the iPad/iPhone home button. The adjustment button for the angle of the unit is secure and allows for 180 degrees of adjustment, it locks and does not allow a collapse. The rear leg is only 2" wide so for heavier devices you may want to center and make sure it is balanced, which is not a problem, just an awareness. The narrow leg to me doesn't allow putting this on one's lap or on a thigh. For use on the chest (see questions) I don't think it would would work well balancing the thin rear leg on the ribs. it is really for desk tops, smooth hard surfaces (IMHO) I use this for an iPhone and iPad (second generation) with no problem , but as an experiment (see questions) I put my Mac Airbook (13" wide) in the unit vertically (portrait) with no problem with it toppling over, I was pleasantly surprised with this test of ability to handle weight vertically. (see attached pic) I have also the UGreen product, which is nice and quite different in that it is wider and taller, which adds some stability, is white colored to match some keyboards, etc. Pleased with the quality, sturdiness and functionality.

This is well made and easy to use. Thicker construction than another I bought.

This stand may be small but WOW it sure does the job perfectly. I love the fact that its adjustable with so many uses. I use it for my smart phone.. my Mac book. Etc.. It comes with so many uses that I ordered a 2nd one for my tablet when I'm viewing recipes on line while cooking.

Nice weight- adjusted and folded smoothly and seems very sturdy. Appears larger in picture- I needed one for a large Ipad and to hold a book. This is just large enough for a phone. So perfect if thats what you need.

I just bought this to replace the stand for my Ipad I left behind in hospital, not realizing it was the same stand I just lost! Lol! I was so very happy about that because this stand is so small, but it is unbelievably sturdy! I don’t have a lot of room, and the table I keep my Ipad on is narrow. This stand works beautifully at keeping my Ipad safe and out of the way when not in use, but it also works great to hold up my Ipad while watching a movie. This little stand is metal, not plastic. I have set this up on uneven surfaces, including the blankets on my bed, and the stand still holds my Ipad up! So many other stands I have used just fall over. I LOVE this compact stand!

I bought three of these, but the first two were stolen out of the mailbox. I'm glad I decided to buy another. I'm somewhat of a tablet stand aficionado. When I see a new model I just can't resist. Anyways, on to the stand: This stand has an incredibly solid build quality. That's a really solid piece of aluminum. Provided it's folded a grown man could step on it without causing serious injury to the body of the stand. The leg is injection molded matte plastic and terminates in a ratchet assembly. I see absolutely no common injection molded plastic defects. The ratchet is very sturdy... you can tell that it's got high quality internals. It's got a push-to-release mechanism on the left side of the hinge that is slightly convex(the other side is flush) which is a nice touch. All points of contact are protected by a generous pad of soft plastic that is actually built into the aluminum... they're not stuck on. This is the sturdiest folding tablet stand that I own. Whoever designed this really cared about the product they were making. It is tremendously sturdy and full of little design touches. It's earned every one of the five stars I gave it.

This product is listed on Amazon as eligible for return or exchange. The product description also states it’s for iPad, iPad Pro and Mini. I have a regular iPad and the latest iPhone. This stand is so small that my phone barely fits in it, and it doesn’t hold my regular iPad well. I tried to return it for a refund s I usually do with any items I’m not satisfied with, but Amazon says the product is no-returnable and that I have to contact the seller directly to discuss my options. Ugh! 😑 This is so frustrating as I’ve dealt with other deadbeat sellers like this one before, and I’ve ended up spending a lot of time and energy going back and forth through endless email chains before they offer a partial refund to me. I’m not about to waste my time on this. So I’m just expressing my frustration by simply giving this product what it deserves. A bad review. Buyers beware and think twice before you take a chance on this deadbeat seller’s product.

Just received this Multi-angle Mini Portable Durable. . . Emphasis on "mini." So far, very nice. Let me address each descriptor. This device stand does adjust to pretty much any angle, and smoothly, too. I propped an iPad Air 2 on it almost vertically (for TV watching), on a tray table. I tried pushing it over, and the table started tipping, but the iPad didn't budge. Then I stood my older, heavy iPad in the cradle — with the cover still on — and it's still stable! It's certainly "mini" (I've seen larger business card holders), and it folds almost flat, so it's very "portable"; you can just throw it in your bag. "Durable" remains to be seen. The body is solid metal (nice satin finish), but the kickstand and release are both made of plastic. This thing has got a little weight to it, so maybe having plastic components helps keep it lighter. The stand and release button seem sturdy, but may prove to be the weak point. I will try to update this review after using it (binge-watching on Amazon) for a few weeks. I recommend it, especially if the Apple "smart" cover turns out to be too floppy for you.

Excellent product with hight quality

Está hecho en aluminio y cuesta lo mismo que los de plástico de la competencia. No hay comparación alguna. Excelente calidad de construcción. Al apretar el botón en la bisagra se puede cambiar el grado de apertura del soporte (inclinación del dispositivo) y después, al liberarlo, se mantiene fijo. Es muy estable y seguro para un teléfono aunque un poco chico para una tablet (sobre todo si se coloca horizontalmente), pero cumple su función. El espacio en el canal inferior es suficiente para el teléfono o tablet, incluso con una funda protectora normal. Desde luego, con una funda triple-sized-extra-super-high-antishock, no va a caber. Estando el dispositivo en posición vertical, no habrá acceso a la ranura de carga, el soporte no tiene perforación en el canal. Así que si lo va a cargar, deberá colocarlo horizontalmente. Estoy muy contento con esta compra.

1) El envío muy rápido. Llego un día antes de lo previsto. 2) Lo uso para un iPad mini 4. 3) Excelente relación calidad/precio, bonito diseño y muy muy estable, que es fundamental. 4) Tiene el peso suficiente para que en ningún ángulo ni posición (aunque esté muy vertical), se pueda caer. Protecciones para que no se raye la parte trasera ni delantera cuando lo colocas. Yo lo utilizo con la funda original del iPad y cabe perfectamente, tanto vertical como horizontal. 5) Si lo estoy cargando debe estar colocado horizontal porque vertical no tendría acceso a la conexión del cable. El botón Home queda perfectamente a la vista y accesible. 6) Está fabricado en metal, y la pestaña que gira para dar inclinación en plástico resistente. El sistema de giro es de 180º y muy seguro, con lo que puedes tenerlo casi vertical a prácticamente tumbado. OJO, cuando abras el paqueteno no intentes girar la pestaña pensando que es por presión; en los laterales tienes que presionar para que giré, y soltar para que se quede en la posición que deseas. Un buen sistema de seguridad. 7) Muy útil también para leer tumbada en el iPad o ver una peli. Lo puedes poner en el regazo y no pierde el equilibrio. Así te libras de tener que estar sujetándolo. 8) Se lo recomiendo a todo el mundo, tanto para tablet o móvil. De hecho, voy a comprar varios más, amigos y familiares que lo han visto han quedado encantados. NOTA: Vi en Amazon este mismo Atril con otra marca impresa, me imagino cada fabricante compra el diseño y le imprime su marca. En cualquier caso, éste cuesta 3 € este más barato.

Ich bin restlos begeistert von meinem JETech Tablet Ständer und möchte meine positive Erfahrung teilen. Dieser Ständer hat nicht nur meine Art, Tablets zu nutzen, transformiert, sondern auch meinen Komfort und die Flexibilität im Alltag erheblich gesteigert. Die Verstellbarkeit dieses Tablet Ständers ist beeindruckend. Er passt sich mühelos der Größe meines Tablets an, sei es ein iPad, Galaxy Tab oder ein anderes Gerät. Die zahlreichen Einstellungsmöglichkeiten ermöglichen mir, den perfekten Betrachtungswinkel zu finden, sei es beim Lesen, Video schauen oder Arbeiten. Die Faltbarkeit des Ständers ist ein echter Pluspunkt. Ich kann ihn problemlos zusammenklappen und in meiner Tasche verstauen, was ihn zu einem idealen Begleiter für unterwegs macht. Die Robustheit und Stabilität bleiben dabei jedoch keineswegs auf der Strecke. Die silberne Farbe verleiht dem Ständer eine moderne und schicke Optik, die sich nahtlos in mein technisches Equipment einfügt. Die rutschfesten Gummifüße sorgen dafür, dass der Ständer sicher auf meinem Tisch oder einer anderen Oberfläche steht. Die Anwendungsmöglichkeiten sind vielfältig. Ob beim Kochen mit einem Rezept auf dem Tablet, beim Videoanruf mit Freunden oder bei der Präsentation im Büro – der JETech Tablet Ständer bietet die ideale Lösung für zahlreiche Szenarien. Insgesamt kann ich den JETech Tablet Ständer uneingeschränkt empfehlen. Er kombiniert durchdachtes Design, Verstellbarkeit und Tragbarkeit auf eine Weise, die meinen Tablet-Gebrauch verbessert und meine Erwartungen übertroffen hat. Ein Must-have für alle Tablet-Nutzer!

This is a really simple idea and very useful bit of kit that comes at a great price. I bought a 10" All new Amazon Kindle and a Moko case. The case is a pain. The folding part of the case is small and creates a tiny triangle behind the Kindle to support it. You can't stand it up in portrait either. Out of frustration I thought I would have a stab at this little stand. So glad I did. The stand is 90cm high and is made from an attractive brushed aluminium. I had my doubts that it would support the heavy 10" kindle but it does the job with ease. The angle of the stand is adjusted by pushing in a sprung plastic plug at the end which unlocks the rear arm which can then be set to any angle. Let go of the plug and it is locked and the stand is once again rigid. There is a rubberised plastic channel for the Kindle, iPhone or whatever device you need supporting, to sit on so no danger of it being scratched and there are two tidy plastic lugs that sit at the rear of your device again avoiding any damage to you devise. There are similar studs on the bottom of the stand to prevent scratching of the work surface. My Kindle will stand on this in portrait or landscape and it is stable. I have used some apps that require you to touch the screen and the stand and kindle remain stable. I have used it with the Moko case in situ though would prefer not to as the case can get in the way in portrait mode. The product is very well made and looks far more expensive. I was getting tired of stooping forward, looking down at a Kindle lying on a flat surface. Job sorted! Best buy of the year so far for me. It has certainly made my cumbersome Kindle more manageable.