750GPH Automatic Submersible Small Boat Bilge Water Pump with Float Switch 3/4 inch (19mm) Outlet Diameter Hose

Bilge working great

Walker Bay 8' dinghy. It was a pain in the butt always bailing the dinghy. I secured this pump behind the middle seat in the trough. Hooked it up to a motorcycle battery that's bungied under the seat. Drilled the exhaust hose out the starboard side near seat and hooked up a small solar panel. There is a very little bit of rain water in the trough to sponge up but that's it. This pump is powerful and has operated flawlessly for over a year. This setup is maintenance free. UPDATE: It died!!!...got over a year out of it. It did well and Im happy with it's performance. 5 Stars.

This is a great product at an affordable price. However, the industry standard for connecting these (for the auto mode) is to use the brown wire as +ve and black wire as -ve and if you aren't using manual mode, seal and tie off the brown-white wire. When I connected it for auto mode as documented in their manual and as described above, it ran continuously. For a moment, I thought the float switch wasn't working properly but I read someone else's review who indicated that the brown and brown-white wire functions were improperly reversed. After switching these two, my bilge worked correctly in auto mode.

Hurricane Helene floated my boat off my lift and deposited it in the lagoon behind my house. The plug was out and the bilge pump kept it afloat for around 12 hours until I finally got home and put the plug in. Thanks for the quality pump!

Pump failed and has dead short after one season of use, don't waste your money

Why did you pick this product vs others?: I bought this automatic bilge pump to replace the same model in which the automatic float switch wire was broken. Durability: The replacement pump float switch in automatic mode stopped working after 1 month. Other users have reported similar problems with the automatic float switch. I strongly recommend not buying this product.

The bilge pump came on time the ski still getting work done but as soon as ready will let you know so far it good!! Thank you for the quick response

I needed to replace a couple of old bilge pumps. My boat has standard marine wiring and I started connecting the new wires to the old wires but the pump wouldn’t work correctly. I used a multi-meter and then verified by (finally) reading the manual. Most bilge pumps use the brown wire for automatic operation, that is using the internal float switch. The brown-white wire is used for manually turning on the bilge pump. The Aurelio Tech pump reverses these colors! The pump itself is great, but this is a really bad wiring design. Make sure to test your pump after wiring it.

Works great no issues. Float is accurate and pumps the water out in a timely fashion all you can ask for in a bilge pump

It worked amazing and it lasted along time

The pump works but the instructions should say that the attached hose should NOT be in the water. I left my boat and during windy, wavy weather, the hose ended up in the water and the pump started pumping water INTO the boat. Thank goodness the battery died or my tin boat could have sank!!!!

High value. Double the volume and half the price as OEM bilge pump on a Boston Whaler Montauk 150. Won’t plug with pine needles burning fuse so lasts several seasons.

this bilge pump failed on second fishing trip . the motor impeller became hard to turn and kept blowing fuses . no debris in bilge or around impeller shaft . suspect a poor product . beware .