Supershieldz (3 Pack) Designed for MacBook Pro 16 inch (2019-2020 Model A2141) Screen Protector, Anti Glare and Anti Fingerprint (Matte) Shield

For the ones who have installed screen protectors before this may seem easier compared to the ones who have no experience and who are clueless. The GOOD: The screen protector does exactly what it is supposed to do! Refection is 100% gone FULL MATTE The cut-out is perfect for the 16 Macbook pro. THREE screen protectors for this price - GREAT DEAL! THE BAD: Install is not the easiest! TOO much of a hassle when it does not need to be - there's gotta be an easier solution for the ones who cannot work around it! MY EXPERIENCE: The following pictures attached were my second try. I successfully installed it on the first try but with too many bubbles and I was getting frustrated. On the second try, I nailed it with luck and got it perfectly aligned! TIP: Use tape as a secondary holder when installing the screen protector. I started with the top and aligned the camera cut out with my hands holding the tape on each side. There will be a small gap at the bottom of the display which is normal!

As of today ( 12/7/19 ) it is still extremely difficult to find accessories for the new 16 inch MacBook Pro. I had a similar anti glare matte screen protector for my 15 inch MacBook Pro but could not find one for my new machine until I came across this. It had no previous reviews so I ordered with heavy skepticism. To my surprise the package was delivered 5 days before scheduled delivery and the product is just fantastic! Application is very easy ( make sure you're applying it in a dust free environment for a seamless experience ) it blocks almost all glare from light bulbs as well as any other direct source of light. It precisely covers the screen and the camera cutout for the FaceTime HD camera is also extremely accurate. The best part is that they send you a total of 3 screen protectors, so you have spare ones if needed down the line. I recommend you buy this if you want a good quality matte screen protector for the new 16 inch MacBook Pro.

Install was surprisingly easy despite all of the reviews stating it was hard to line up. I had a little bit of a time getting rid of some air bubbles but once I took off the Step 2 layer it was easy. I am really enjoying being able to see my screen during the day with a big window behind me. However, as a graphic designer, it makes the screen pixelated and fuzzy. So I am finding it hard to want to keep it installed. If you work with graphics on your Mac, then this may not be for you.

These are good matte screen protectors. Sure they knock a little bit of the retina resolution down, but the lack of glare when using my laptop in a bright room or outdoors is well worth relieving the eye strain that comes with glare. SuperShieldz is a good value at a fair price and I have used their film and tempered glass screen protectors on all of my portable devices for years to good results. If you have issues with their products, they stand by them with their warranty, you just have to contact them via their website. Installation tips: 1. Run a hot shower in the bathroom for a few minutes before attempting installation. The humidity will cause all dust to fall out of the air. Clean dust off the countertop before you begin installation. 2. use the included screen alignment stickers 3. start installing the protector in one corner and slowly set the protector down, removing dust with the included dust removal sticker as you go 4. some smaller bubbles will work themselves out within a day or two.

Easy to use & durable

The instruction photos for this product showed a cell phone. Only problem is this thing is a giant computer screen cover. It isn't the same. The squeegee card is the size of a credit card. It came with an eyeglass-type lint cleaning cloth and that's it. Installation was a pain and it came out awful with bubbles and dust particles caught underneath. At least it came with 3 protectors. Ultimately, I took off and threw out the first one that went on my screen terribly. I then used some sticker and wipes tools from another product (that I found later) that salvaged this product. The product itself went on beautifully after I used the sticker placement tabs, wet wipe, and dry wipe from my other product (a trackpad protector sheet).

the quality of the anti-glare is good, but that is about the only thing that this has going for it. the means to install it is horrendous. I'm normally very good at making screen protectors perfect with no air bubbles and no lint/dust. when I pealed off the bottom of this protector it came with lint on it all over. I used adhesive tape to take off what I could, but its physically impossible with the quality of the protector to install it without having air bubbles and lint bubbles all over. I hope I can find a different brand because I'm not buying these ones again. Be fore-warned. If you don't care about air bubbles all over the screen go ahead and buy them, they do have pretty decent antiglare, especially for the impossible to keep clean apple screens.

It took all of 5 minutes to apply the screen cover. The biggest challenge was finding the right angle—how to hold the material and where to place the computer. In general: I used a tap method to drop it on—did not help at all when I was removing the film. I cut out the camera hole to make it bigger so I didn't have to stress its placement—really it only fits one way and you can reposition it multiple times to get it right, thus the larger camera hole was irrelevant. I did the 1" peel method to place it down, then had to relift and use the card to lay it flat. This actually worked better than expected. First placement w/o the card resulted in massive bubbles. Second time, holding the film taught, and using the card to flatten it to the screen worked really well. I only wish i had shifted it slightly—this screen cover has edge to edge coverage, thus a slight skew means you'll have bubbling on the outer edge. If it matters to you I recommend cutting a 1/10th millimeter from the rt side prior to placing it. Overall pleased with the matte surface and how quickly I got it into place w/o bubbles even after moving it at least 1x! No discoloration from what I can tell. And better yet, NO need to clean off pesky finger prints!