HeadlineSign 32432 Stick-On Vinyl Numbers, White, 4-Inch, Made in USA

Does the job well

I needed letters for a construction sign I was making for my nephew's room. The 4" size was just what I needed. Like others have said, you can't really peel these off and apply them free-hand without them possibly wrinkling or being crooked. The way to avoid this is to make your own "transfer sheet" from some clear packing tape. Peel off a piece of tape about 6-7" long and fold the edges back on themselves so you have some "handles" to grasp that aren't sticky. The next step is important - get some of the tackiness off the tape by sticking and then peeling it off your shirt or pant leg. Do this several times - you don't want the tape to be so sticky that the letters won't peel off. Next, cut out the letters you need from the sheets. One at a time, lay the clear tape over the top of each letter. Peel off the backing/extra vinyl around each letter, and you then are left with just the letter, sticky side ready to apply to your surface. Using the "handles" on the tape that you made, use them to hold the letter taught as you carefully place the whole thing on the desired surface. Rub the tape, but only in the area where the letter is - this helps the letter stick. You can then gently peel back the tape, making sure the letter doesn't come up with it. Repeat as necessary!

The letters look great and are thick enough that they seem like they will hold up good. The adhesion is great. The only problem I had was trying to get them on straight, especially the S as the material is very flimsy/flexible and makes it a little difficult to handle.

Great quality letters that don't tear as you try to take them off the sheet. The only issue I had is that they are like super glue, once you place them on a wall they don't come off. Be careful as you may not get a second attempt to line it up or straighten it once you get it near the object you are placing it on. Great letters though that will stand the test of time.

I bought these to use for Estate Sale Signage and they have held up very well after being in all sorts of weather! I am planning to purchase more for additional signs! Well worth it!

Purchased to label a yard waste can. Letters were easy to peel off and adhered to trash can really well. Did not encounter issues with wrinkles/creases when trying to stick on. Has held up really well through lots of rain!

Worked out real well when I used these letters to make a welcome home sign for the lawn for my daughter. They were water, wind and sun proof too! Perfect height for easily reading sign from the road.

A bit difficult to work with. They're die cut, and sometimes not cut all the way through the vinyl. They do stick really well. Clean the area where applied with alcohol (not the kind in your liquour cabinet), and allow to dry before applying. Good luck getting them lined up evenly. That can be difficult. Don't get me wrong, if you take your time and work carefully, you can acheive decent results. Oh, check the number of each letter included, against what you intend to say. Make sure you have enough to complete your project.

Used for outdoor sign lettering, seems fine.

They worked great

Used them for an outdoor sign and they look great.

Some of the letters are slightly bigger/smaller. Otherwise, the glue is great.

Easy to apply. Great for apartment door numbers.