DURA-COATING TECHNOLOGY, Dressing Total Tire Kit, Single Car Kit - All Inclusive Tire Shine, and Cleaner Kit for a Lasting Shine and Brilliant Finish - 16 Ounce Tire Cleaning Spray - Made in The USA

I bought this Dura-Dressing for my 2018 2500 Silverado and for the tires on my Segway. I have read some bad reviews about this. The only way someone would say it’s bad is if they did not follow the instructions. For the first use I applied it to the tires on my Segway, it required 3 cleanings for each tire and allowing drying time between cleanings. I could not believe the amount of stuff that came off of the tires, by the 3rd cleaning the rinse water was clear. I waited until the tires were dry, using a leaf blower to speed it up. After the tires were dry I applied the first coat, after 15 minutes they still looked wet. Was I surprised when I touched them and they were completely dry! I applied the second coat and they turned out twice as shiny! If you are going to buy this, READ AND FOLLOW the instructions! It takes time to scrub clean each tire very well and apply the coating! Plan on an hour for each tire. Even the directions state “If you don’t like the product, you did not follow the directions!” I’m waiting on the purchase of my new tires for my truck and apply it to them. I included a video of my Segway tires. The video was taken on a cloudy day. Pros This dressing will never “sling” off on your vehicle. Dirt, mud and road grime will not stick to it. You do not need to reapply every week! A touch up may be required after a few months! It will not crack, peel or flake off! It gives your tires that WET look! Everything needed to get that great look your vehicle tires deserves is included. Cons, It takes time to do it right, you must clean each tire very well. If your not into reading directions, this will be the time to start.

When they say good things don’t come easy this is an exact testament to the phrase. Absolutely love the product however, your work is cut out for you. If you don’t have what it takes to do it right don’t bother because it will be a waste of money. absolutely love the product however, your work is cut out for you. If you don’t have what it takes to do it right don’t bother because it will be a waste of money. They are very clear about making sure your tires are clean. Cleaning the tires is the hardest part however, it is the main part. cleaning the tires is the hardest part however, it is the main part. Do it as many times as you need to make sure it’s clean. I used a couple of two by fours to elevate the tire and make the work a little bit easier and even. are used a couple of two by fours to elevate the tire and make the work a little bit easier and even once I was done cleaning the tire. I went around with the leaf blower and air hose to get most of the water out of the tires and rims. Then I took a heat gun. You can also use a blow dryer and make sure all the dampness has evaporated. Also, the product will cure in hotter or warmer environment. I went around with the leaf blower and air hose to get most of the water out of the tires and rims. Then I took a heat gun. You can also use a blow dryer and make sure all the dampness has evaporated. Also, the product will cure in hotter or warmer environment. I ended up applying three coats, one at a time going around and let it dry for a couple of hours. Supposedly it is fully cured within 24 hours. The product result looks absolutely amazing but again it is all in the workmanship of cleaning the tires the word to the wise if you think you have very harsh chemicals that have cleaned your rims and tires until now none of them do justice compared to the Dura tire cleaner kit.

To start, I just bought this truck so I don’t know how or where the tires had been used. It’s a 2021 2500 HD Sierra Duramax with 17,000 miles. I anticipated the cleaning process and gave myself plenty of time. It took me 5 cleanings per tire to get it so the foam was white and didn’t have brown or black in it. The amount of stuff that came off the first round was mind blowing. 😂 I wanted to make sure to follow their directions to a T so I was patient and scrubbed for literally hours. It took me 15 minutes per tire for the first couple cleanings because they were dirty. The next few rounds went faster. I would guess 7-10 minutes. They were definitely clean after 5 go arounds. I used my backpack blower on all 4 after the 5th round because I was going to do the coating. For the other 4 rounds they were dry by the time I got back around but I wanted to be sure. The first two coatings of the shine I used a paint brush to get into all the nooks (highly highly recommend this) and the next two (4 coats total) I just went around each wheel and made sure the major surfaces were good and coated. They came out looking very sharp. I will say after 6 hours they had better look great. Now, to see how long it lasts and if that was worth it.

Amazing!! Its really reall!!!😍