The all new RX3S Flight Stabilizer adds on the original V2 design with integrated OrangeRX DSM2 compatible 6CH 2.4Ghz receiver. This eliminates the need for using a separate receiver in your model, not only making installation more tidy and convenient, but allowing you to simply bind and fly with flight stabilization! The RX3S DSM2 stabilizer provides support for V-tail & Delta models, and also offers a remote ON/OFF feature that can be controlled via your transmitter's AUX channel. Utilizing a single high precision 3-axis MEMS gyro, the RX3S DSM2 compatible stabilizer is capable of stabilizing flight on just about any fixed wing aircraft! It provides added stability by automatically correcting the aileron, elevator and rudder channels in flight. This compensates for unwanted changes in the airplane's attitude due to wind and other factors. In short, it makes your airplane much more stable in flight! The RX3S DSM2 compatible stabilizer is great for those who tend to fly in windy conditions, as it will compensate for wind gusts that would normally push your model around. It's also an ideal add-on to your favorite FPV model to keep it on the straight and level while flying. This unit is very simple to install and use. The adjustable gain settings are pre-set to 50% offering mild stabilization. You can easily adjust the gain for each channel as desired to increase or decrease the compensation for the respective channel (AIL, ELE, RUD). Because we design, test and manufacture these units completely in-house (from 3D/2D drawing to materials sourcing, final assembly etc.) we can completely control production and ensure product consistency from design right through to shipping the product to you. Also, the removal of middle-men has meant we can drive better value to the market and retail these units at factory(our) prices!
E**R
Ok, if you're willing to let your plane crash.
When it works, it's great. Problem is when the glitch appeared.... while in the air! One time the receiver became very slugish after a minute in yhe air, would cause servos to move in small pulses until it reached the demand point from the transmitter. Somehow I was able to land and confirmed this glitching. I re-bound the receiver and all ok.... today, did it again, but I caught it at pre-flight. I power cycled the receiver and it checked ok. I took off and flew for about 30 second before the glitching came back... in the air! I was only allowed small left bank jerk movements while in a shallow dive. All batteries were good, distance only 30 yards, as it passed me. My new mustang with only 15 flight, smashed into pieces! So, unless you are totally ok with a crash, don't buy this receiver. I read about this receiver glitching and the many warnings to not use it, but listened to the happy group instead. So, if you decide to use this receiver because the Spectrum as3x cost too much, you may get what you pay for, junk.
C**H
Works very well
This is a terrific bargain when compared to other stabilized receivers. It bound first try on a DX6 in DSM2 mode.This comes with no instructions. You must "Google" to find the rather sparse PDF file online, or be good at figuring it out on your own (antenna goes forward). Will add a star when it proves to provide full range and reliability. - AddedRock solid at visual range. Mount this "in the clear". Don't hide the antenna/s behind a bundle of wire, beside a metal pushrod, under the battery or over steel landing gear. The factory settings were perfect for my E-Flite Extra 260.
S**D
Does just what it's meant to do. I haven't ...
Does just what it's meant to do. I haven't gotten this into the air yet, but that's because I'm putting it in an experimental plane that doesn't want to take off just yet. Might just start putting these in all my planes.
L**D
Very tricky to use. but it works as designed ...
Very tricky to use. but it works as designed. Make sure you back off all the dip switches before your first flight and then gradually add gain. or else expect a scary flight.
K**N
Price is Good but I CANNOT get it to fly Delta
Price is Good but I CANNOT get it to fly Delta, The Shutoff Switch does NOT work at all and the Ailerons were so Shaky that I had to shut them off completely. But it Works as a Reciever
A**.
Outstanding price
Just what I was looking for. I build RC airplanes and helicopters, great to have the right parts when your building! :-)
M**J
Good overall
seems to work okay. It's a little pricy
A**Z
Does the job
Works ok. It does take some time adjusting settings for it to work effectively.
ترست بايلوت
منذ يوم واحد
منذ 3 أسابيع
