StarTech.com Self-adhesive Nylon Cable Tie Mounts - Pkg of 100 - Cable organizer , TAA (HC102)

These are exactly what I expected with a nice twist. The adhesive backing is extremely durable and sticky. I am using these in a CNC Machine shop to keep wires under control inside the machine controllers. They STICK! Every surface was properly prepped and cleaned before application. For the first 24-48 hours they do not hold as well as one would like, but as the adhesive cures, they become almost IMPOSSIBLE to remove. You will not pull them off cleanly, that is for certain. Exactly what one wants in this environment, a good solid hold.

Great for managing lite weight cords and wires. I used these under my cabinets to tie up my under counter fluorescent light cords. The bottom of my cabinets are that slick veneer and these stuck tight and have held great. I used to use these inside desktop computers I built to manage cables and wiring for better air circulation and cooling. The inside of a computer case is very warm but these held tight even in that warm environment. I have not used them to tie up anything really heavy but for my light duty uses they are wonderful.

The idea of this product is great and these work great, for small cables. I have two coax cables tied to one of these and it popped of the wall. It didnt leave residue or rip off the wall paint. It needs more than one mount per 6 inches for stubborn cables, good product look for monoprice provider

These cable mounts are awesome. I currently use a couple of them to route large cables behind my desk. I have a large audio system so there are a bunch of coiled up wires, and it looks so much better being pinned up than having them on the floor. The adhesive is nice and strong and since it's the entire back as opposed to just the edges like some other similar mounts, I have no doubt that these will stay down (er, up) for a long time. Also, side note: these things are very flat since they just have to hold a zip tie. If your computer case doesn't have a lot of management loops, these will work wonders for you.

I bought these cable tie mounts for management of some computer cables that run through the inside of a metal kiosk, since they were the same size and seemed almost identical to the mounts my company used to get with a different kiosk we used to buy. Well, these Startech HC102's are absolutely HORRIBLE for our purposes. We stuck up six mounts inside of our kiosk and a couple of hours later we tied up a few cables to them. The only mount that didn't fall off within a day was one that we ended up not tying any cables to at all. The kiosk was at room temperature the entire time, and the mounts weren't supporting much of the cables' weight at all. One of the mounts only had one thin/flat computer power cord tied to it. The really bad thing is that is wasn't even the adhesive that failed. When the mounts came off, each one left its square of adhesive still stuck to the metal. The adhesive on each mount had separated from the little thin later of white foam rubber, which was still attached to each of the plastic mounts lying in the bottom of the kiosk. I found a tiny logo on one of the left-over GOOD mounts we had, which turned out to be made by Panduit who I'm familiar with. Even though the Panduit cable tie mounts are 6-7 times the cost of these Startech mounts, I'm ordering some of those now since I need the mounts to actually stay in place for a few years - not just a few hours. If all you're doing is sticking up a mouse cord to the underside of a desk or something, then these HC102's might work, but I wouldn't count on it.

Product works as expected. Seems to have adequate stick power. I used it on the top metal surface of the garage door opener bar to redo wiring to the door sensors. I also used them on a painted wood surface. No problems with sticking. I don't know how long that will last, but for now, seems OK. Good value, delivered on time. Easy to run zip ties through to fasten stuff. I like them.

These work excellent for holding a few wires out of the way. If you need to hold something heavy, the double sided tape may not hold for long, but they provided a hole in the center where you can put a screw. So then it will hold any reasonable load. On a dropped ceiling, these are just right to fit at each crossbrace, but they are maybe 1/16 bigger than the typical runner.

I spent a few hours using these adhesive squares to run a 100'+ cat5 cable and I must admit I was extremely pleased when I was done, It turned out great. Then the next day, 3-4 squares fell off the wall .. no biggie .. I replaced them with new ones. Then the next day, I did the same thing. A week later half my cable is on the wall, the other half has fallen to the floor. 17/48 of my squares have now fallen. Very disappointed, however, it was a low risk investment. I'll try a different vendor and cannot recommend this product if you are sticking it to a wall or the door frame.

If you tried buying these in the store almost impossible to find. 3M quit making them. Used 3M tie mounts before, these are just as good. They work great. Used them for hiding my wiring when I stalled my kitchen lights under cabinet. The backing is easy to peel off and the stick on smooth surface very well. Can't imagine them falling off anytime soon. the hole is pretty large to. You easily get a medium size tie trough the hole. Great price for quality and quantity of mounts.

These adhesive mounts are great. I used them in my computer case and also under my desk. In my computer case, they were a little large, but they worked well to hold the cables, and keep my case clean. Under my desk they were used to hold heavier cords and cables for my desktop computer. So far the adhesive is holding up well in both applications. I will update with more information in the future as I use them more.

One of the biggest challenges for these are that they don't hold much weight. I had 6 of these on a 4 feet powerbar, but it kept falling off. I had to drill into the drywall, and screw these into the wall, and now they work perfectly!

Work well and easy to install, but if I turn my AC off and my room heats up even slightly, these stickies will temporarily come of the wall in places.

Easy to use sticks to boat floor and holds cables with twist ties