LuckywayCountersink Drill Bit Set #6, #8, #10 for Wood, Drill Counter Sink Flip Drive 3 in 1 Complete Unit Set, Including PZ2 Screw Bits 4-Piece

The Luckyway 4-Piece Quick Change Drill and Drive Set has truly been a game-changer for my carpentry and finish carpentry projects. This set is an absolute must-have for anyone working with wood. The quick-change feature is a time-saver, allowing me to effortlessly switch between drilling and driving bits, reducing downtime and boosting efficiency. The set's durability and precision are remarkable, ensuring that each drill hole and screw is placed exactly where I want it. From rough framing to intricate finish carpentry, these bits have consistently delivered the performance and reliability I need. I've found that the set's versatility is unmatched, making it an essential tool in my carpentry arsenal. Whether you're a professional carpenter or a DIY enthusiast, the Luckyway 4-Piece Quick Change Drill and Drive Set is an investment that will make your woodworking projects a breeze, I highly recommend this product.

I have bought these quick-change drill drive sets for many years. The Stanley ones after a couple of uses won't come apart. I have three of these and all are frozen in place. I have used oil a vice and vice grips to get them apart, which ruins the "quick" in the set. So far these are working well. Sometimes if you don't get them put in properly they fall out, but with a little practice they will be fine.

I bought one of these, but got a few more because they were a couple bucks lower on Amazon Prime Day. The original arrived about a week before Prime Day, but was not the full kit - it was missing the main quick change holder - not much use without that. I chose to have Amazon send a replacement rather than a refund. (No deduction to my review for that, someone in the warehouse probably grabbed someone else's return unit- not fair to judge the product for someone's error). However, I did not receive my replacement unit until after Prime Day - and after purchasing (2) additional for the Prime Day price. These units are mediocre quality from what I can tell, but still a fair price for a complete set like this. The only set of the 3 ordered and tried so far, was a slight bit wobbly, so I wouldn't suggest these for precise work. Also, the countersink portion of the bits were not sharp and don't cut into the wood as well as a brand name set I own. I'll probably try to hone the countersink to see if it sharpens. Most of the work I use these for is 'quick fixes' around the house - not high quality work. I love the versatility and convenience of the quick change system, and usually keep one (#8) chucked into my portable drills. The quick change holder did provide a solid hold of each of the 3 bit sizes in either position (drill bit side, or screwdriver side). Based on the other brands I own, these appear like they will hold up over time. I'm going to keep one set just because of the convenience/versatility, even though not quite as good as I hoped. I'll debate returning the other two and/or test them to see if the one I had was just not up to snuff - but, I don't have high hopes. I did not expect them to be real high quality like some brand name models, but didn't want to spend $35-40+ for just one 3 bit set like this one. Again, for the things I use these for, they should work just fine, so not a bad deal at all for the price. I may just give a set away to someone else who's never owned a 'quick-flip' system so they can appreciate the the convenience of having one.

This is cool tool to switch quickly between drill and drive.However there is an issue with the chuck end. It does not fit in the standard locking bit holder due to the allen key sticking out the end. I shaved 1/16th off the allen key and also brought the choke point down closer to the end to make the distance closer to the usual 1/4" instead of the 7/16th" as it comes.Release is pull out push in and not spring return.Unit is made of aluminum past the primary shank and bit. So don't use it as a nut driver, or you will tear it up.I would give it 3 stars but am setting to 1 so people read this.

Used this to install Christmas lights today and it definitely made the job easier by flipping from the drill bit over to the screw bit. Unfortunately there are several things I didn't like about the set:1. The drill bit didn't last long before it lost its sharpness and this was only used to drill pilot holes through fiberboard around the house soffit.2. The phillips screw bit is supposed to be #2 but is more like #1 with a pointer/narrower tip. It could not grip the screws I used for the lights and ended up replacing the bit with a Dewalt #2 phillips that worked much better.3. The biggest issue I had was how sensitive the bit release on the shank is! If you barely bumped the drill bit then it released it too easily. I lost count how many times I had to climb down the ladder to retrieve it. At least I got my steps in for the day.

I had a set of these made by DeWalt but at the price I paid for these it was a no brainer, great value they look sturdy and perform as well as the other brand. Very easy to use and flip the bits!

They are great, one of the better ones I've gotten over the years. Price wise it's perfect, the drill bits are sharp and haven't slipped a bit. I've used it for probably over 100 screws, and kept forgetting to take pics. One I did 4 sample drills, and then set 2 screws in a drawer, to add a divider. The second pic is half with screws set flush (black) pieces will have other pieces on top and a button head, like the other screws (silver) don't have to be set flush. A great tool to have in your box. Very recommended. Enjoy.

I brought this to replace a similar set of Montana flip drivers purchased in the 1990's. They came as a bundle with a Makita cordless drill at Sam's Club. Although the design is essentially the same and the parts seem interchangeable, the quality of the new set is poor. The fit between the bit holder and the driver is too sloppy. The bit holder will jam inside the driver with almost every use. I needed a pair of pliers to break the holder free so I could flip it over. Overall it jammed so much I just couldn't use it.