GameMaxARGB 3 In 1 Kit, 3 x GameMax Velocity Fans (For PC Cases, Coolers & Radiators), 1 x GameMax Viper LED Strip With ARGB PWM Hub (Six 3 Pin Or 4 PIN Power Fan Port) and RF Remote Controller

The media could not be loaded. I bought two packs, all worked and there were fan screws in the packaging. I tested them out outside of the case because they're for a new build and the case hasn't arrived yet, but they push out a decent amount of air and are very quiet imo.I can't attest to the speed control yet, but I suspect that people have had the splitter box plugged into the SATA at the same time as their mobo and that's why they didn't have system control. You either have to have one or the other, not both. If you want your system to control the fans you need to set it to DC and not PWM in the bios and let the mobo supply the power from the fan header, if you have the SATA connected too it will just run on full power.I'll update once I've installed them.Update: I've had these installed for nearly 3 years with no problems whatsoever, I've included a video so that you can see what they look like. They also move 94.8CFM which doesn't seem to be stated on amazon.Definitely worth the money.

Runnin g 5 x 140nn 1 x 120mm. At the rear set to silent in aourus elite x570 aida64 full stress test r9 5950x rtx. 3060 can hardly hear the fans temps never go over 72 & 56 degrees well worth it.

The noise level is the only thing that could be bothersome but adjustable, the argb functionality and magnetic RGB strip really gave a new lease of life to an old hard to work with zalman case. Improved my cooling and setup aesthetic with argb synchronisation. Truly bright and smooth animations which is also speed adjustable with plenty to choose from even through the deafualts.

So for those peeps who want this unit to control the fan speed via the motherboard, well the product states it has the 4 pin PWM header going from the controller to the motherboard...this is incorrect as the header only has 2 of the 4pins connected which is for power only! however there is a walk around which I used but required me to get to buy a PWM 3 way splitter to power and manage the fan speed by motherboard and use the controller just for the RGB lights on the fans. Hope this makes sense to anyone trying to get this to work off the motherboard PWM header, I hope Gamemax fix this issue and correct the stated information as their products are generally decent. Also please get rid of the Molex headers on the fans they are ancient now and a waste of space for the modern Era!

2 OF THE THREE WORK 1 seems dead no lighting ( minor quality control glitch i guess),, overall the ones that work, work fine, with my existing argb controller, sync is straight forward, so far so good, shame 1 was dead on arrival. could not be bothered to contact seller and go through hassle of sending back and replacing, as i had a different fan available to use, otherwise been in the pc case for few weeks now, and seem to be operating just fine. 4 stars due to one being faulty out of the three in a pack. the argb controller works fine and no issues with that, you also get a extra led argb 3 pin strip which works great too, apart from one being faulty out of the 3, i am still happy with this purchase. noise level of fans is hardly noticeable even on full speed, and the remote supplied works easily from a distance too. with a good combination of lighting modes, and even fan control speeds right from the remote itself.

Added to a new build computer. Great for cooling and provides multi coloured lighting.

This is my second set now, easy to install and good value for money, would definitely recommend

A really good value way to get ARGB fans and strip.Editing my review, as now have a 2nd set, and have learned more on how to use these through trial and error.To use motherboard software to control LEDs via the hub, just press the off button on the RF remote whilst the hub is connected to the correct header on the motherboard. Et voila, you can use your motherboard to control the hub connected RGB products.You can plug the fans and LED strips into any of the 3 pin headers on the hub, just my first hub had a slide sizing issue with some of the holes maybe?These kits don't come with fan screws. 2 kits in now, no fan screws came with either kit from 2 different sellers. So unless you have screws already, you will need to order some.Better instructions, and fan screws included in the kit, and this would be a 5 star review.....

L'emballage un peu léger mais super produit je recommande, silencieux et performant.

They work very well, got screws and all fans worked great. They are a bit loud but not to bad. But my led strip only lights up one LED, kinda sucks but rest is good