FastTrack Wall Mounted Storage and Organization System Rail Horizontal 48" 2-Pack Holds up to 1750 pounds Each Rail for Home/Garage Storage and Organization

These rails are substantial, offer a decent finish, and are fairly straight forward to modify for varying applications. While taking it out of the box I was impressed with the heft of it. It's overbuilt for what the vast majority of folks would try to do with it (never underestimate a smooth brain). The plastic trim/cover is easy enough to install and hides the rail well without compromising the load bearing capacity. I found 2 sizes readily available. Maybe there are more out there that I just didn't see? What I wound up doing to make a more exact fit for my install was to break out the angle grinder and the bench vise. I had no problem tacking several pieces together to do exactly what needed done.

These are great for organizing your garage. I used butterflies to anchor them to the wall. The tool holders clip onto the bar. Excellent product

I recently installed this organization system in my garage, and I’m really impressed with its performance. The installation was straightforward and didn’t take long at all. Once mounted, the attachments are very easy to place and remove, which makes adjusting and reorganizing simple whenever I need to. Before, my garage was a cluttered mix of kids’ toys, strollers, and bikes. Now, everything has a clear spot, and the space feels much more functional and tidy. I especially appreciate how versatile the system is. I can rearrange attachments without hassle as my storage needs change. Overall, this system has been a fantastic investment for keeping my garage organized and stress-free. Highly recommended!

I chose the Rubbermaid Fast Track system after looking at several other incomplete displays of competing track systems at a local big box store. The Rubbermaid system looked to be the sturdiest, as well as the most complete, and of course Rubbermaid is a brand that you can trust to be around in a year when you’re looking to expand your rack. It’s easy to install, too, IF you pay attention to the small details. Detail #1: The metal track and the plastic cover are NOT symmetrical! Look closely before you slide the cover off the track. The upper flange of the metal track is slightly longer than the lower flange, and if you mount it upside down, it’ll be extremely difficult to get the cover on. Make sure that longer edge is mounted UP. Detail #2: The plastic cover MUST be mounted right side up, or you’ll never get it on. The upper edge wraps around the metal track, but the bottom edge is shorter, so it can snap over the rail. Happily there's a Rubbermaid logo printed on the cover to help you get this right. Detail #3: The holes in the rail may not line up with the studs in your garage. I found it necessary to screw some short lengths of 2x4 alongside three of the existing studs in order to provide secure anchors at every stud. (See photo) Detail #4: Do NOT buy the Rubbermaid mounting kit. The screws provided are garbage. Instead, buy a box of deck screws. To do the job right you’ll need a drill/driver or (preferably) an impact driver. Don’t try to attach the screws by hand. You should also drill 1/8th inch pilot holes, even for “self drilling” screws, especially if your house was built before WWII. Older garages were built with wood that’s a lot harder than the typical SPF framing lumber used today. You’ll also need a level to do the job right. Figure out what height you want to install the rail and make a mark there. Rubbermaid recommends 4’ or 7’3”, but I installed mine at 6’ after experimenting with the tools I planned on hanging. Install the rack with one screw, check the level, and install the next. Check level again, and if everything looks good, install the rest of the screws. If you put the rail in correctly, the cover will easily snap on. Hook the top edge and give the lower edge a sharp rap with the heel of your palm or a rubber mallet.

You know the individual pieces of the FastTrack garage system seem pretty cheap. Before your done with all the pieces parts tho, it isn't cheap. That said, you'll end up with a very attractive alternative to all your garage clutter. The DO look good and function well. You won't believe the weight these tracks are able to safely hold. It's amazing. I think its rated at 300 lbs or something, if you have at least 3-4 studs hit? A TIP from a user. You've heard the expression measure twice, cut/drill once. HEED THAT ADVISE. Make CERTAIN you find and mark your studs, The more of the long screws into studs, the more weight you can safely hang from these rails. I also tried to screw the uprights for a shelving system into studs where I could. One of my 3 garage setups Has this 48" rail & 3 vertical rails that hang from it. On the vertical rails are Rubbermaid shelve brackets & heavy wire shelves. I strongly suggest three uprights and three sets of shelve brackets to give the wide shelves a good center support. I intended to put 3 propane tanks (pretty heavy) & a couple 35 lb bags of charcoal on there. Also an extra 40 lb bag of dog food. The grill parks nicely underneath. Sweet setup. GOOD stuff but your total cost for a couple of rails and associated accessories you'll need will likely run $250-$350 bucks to have what really makes a diff.

Easy to install and was everything I thought it would be. Great quality!

I have these for awhile and just added to them they work well and have many different attachments

Item is as described and expected. Durable, strong and well made. I am using it for storage and it does hold up well and aesthetically well. Great quality and based on what I needed this for warehouse storage. The rail is heavy duty and a fantastic looking. I ordered two and I can order more of it without a doubt. Worth it!

Magnifico! Súper recomendado!

Great product, yet I used deck screws with washers, rather than the Rubbermaid screws (requires pressure drilling and they strip easily)

He comprado 2 rieles Fast Track, para poder acomodar escaleras, mangueras y carritos de compra, en fin, para darle un orden al estacionamiento. Y, este producto ha sido una gran sorpresa; los materiales son de alta calidad y resistencia, tiene una gran variedad de accesorios dependiendo de tus necesidades (ganchos de diferentes tamaños y usos, canastas, rieles verticales para armar un tipo armarios de herramientas, baúles plásticos de uso rudo, etc.). En los ganchos o accesorios, es donde debes tener cuidado al elegirlos, ya que soportan diferentes pesos 10kg, 15kg, y más. Las medidas de este riel son 1.22mts largo y 6cm de ancho. La instalación, es muy sencilla en concreto... Si lo vas a colocar en un área con tablaroca, deben localizarse los postes para anclarlo correctamente, ya que el acero con el que está construido es pesado, sin olvidar el peso que soportará después. Y, el espacio entre los agujeros para su instalación es de 2cm. La altura entre el riel y el piso, puede ser de 2.22mts y 1.22mts. Los agujeros en los postes de tablaroca debe usarse una broca de 1/8", y en yeso o concreto de 3/8". Trae su instructivo en ingles y español, en la etiqueta frontal del producto hasta abajo donde vienen las palabras OPEN HERE.

Amazing system, I have purchased 2 x 84 inches and were delivered when expected, as expected. Pros: - The hooks slides flawlessly on the railing as expected. - The rails looks good and are made of durable Cons: - The tracks do not come with any hardware (sold separately) so I had to use my own wall anchors - The rails will follow the curve of the wall making it a bit harder to put the black plastic cover - I was not able to put the railing flush side by side so I cannot slide from one railing to the other (could be a problem from my installation methods and not necessarily from the product) Please note that considering the length of the railing, it would be recommended to be 2 person for the installation

Lots of fastening holes in back makes it easy to install. Hooks are easy to snap on and move as required.