SmrazaCompatible with Raspberry Pi 4 Case, Acrylic Case with 35 x 35 mm Cooling Fan, 4PCS Heatsinks, 5.1V 3A USB-C Power Supply for Raspberry Pi 4 Model B (Upgrade, Large Fan and Large Heat Sinks)

Fun to put together and nice quality. They put alot of widk in the design of this item thank you.

Need a pi4 4gb? This kits for you. Its got a great case, heatsinks with thermal tape on them, a fan to cool the whole thing off, a nice sized microSD card @ 32gb, and a great power cord with a dedicated on/off switch. What more could you really ask for?I used this to setup an octoprint server for my Prusa Mk3s 3d printer. Itsa powerhouse pi and overkill, but that just means i can do more with it in the future should i choose. It runs cool, and its a very well put together kit with everything you need to get up and running. You could run pihole on this as well, and also retropie if you wanted to. And ive heard the pi4 4gb just slays retropie, a ton more than a pi3.Would buy again, and will reccomend to my friends. Cheaper than a cannakit, with comparible and really, better quality id say ( their power cables kinda blow, as do their heatsinks.. this kit has copper ones ). Plus, its cheaper than a cannakit because theyve gotten a bit bigger now and youre paying for their name, not so much their products.Tisk Tisk Cannakit, companies like this are gonna get cha.

I was having my raspeberry pi4 run very hot around 70-72 degrees C and purchased this case. It was simple to put together as it just stacks together and you put the pi in the middle. The fan easily connects to the board and works. It does make a little noise but not really something you can hear unless you are up next to it. Good quality and does the job. Just make sure you put the plates in order in the correct way or you might have issues with connecting cables to the pi like I did but a simple reversal of one plate solved that. The power cable that comes with it is great and works and enjoy the easy access switch it has to turn it on and off.I would recommend this product

Yes, I would love to wait until you have to return a piece of plastic smaller than your pinky fingernail because it's broken. Total crap product, do not buy and will be returning asap.

I didn't realize this was was stacked like a hollowed out deck of cards lol... That aside assembly was a little confusing since some of the pieces look similar and some of the cut outs look like they can go either way. All in all it took me about 15-20min to piece together properly and some of that time included placement of the heat sinks. The case is great though, my RPi4 seems to be cool and runs kodi like champ with no issues.

Sound quality for the value

This is my 1st experience with this type of pi case. It was rather easy to put together, except that when it came to the fan assembly, the diagrams & instructions were a bit confusing. One thing is that a few of the pieces take a little effort & wiggling around to get them into place. I ended up figuring it out on my own, though. It's pretty straightforward. Also, this kit contains a larger, more powerful fan than you would normally see with previous pi models, like the 3 B+. My only concern is about the wide open bay on the power/display ports side. I live in a basement apartment, I'm probably going to have to take some netting like used in screen windows to cover all the openings, to ensure actual bugs don't crawl inside. Otherwise, I'm very satisfied with the case & kit. Especially for the price. I feel it's a very good deal.

The design doesn’t allow you to plug anything in those ports.

Quede totalmente sorprendido por los silencioso que es el ventilador que viene integrado, incluso usandolo a 5v con otros suele ser incluso hasta molesto, pero este puede pasar casi totalmente desaperscivido, especialmente si lo usas a 3v

A combination of case and PSU - with switch - especially tailored for the RPi 4. The ‘case’ consists of a large number of thin slices of clear plastic that build around the RPi 4 card. If you follow the instructions carefully it does go together, but it is easy to get the acrylic layers the wrong way round, so the power and hdmi connections are obstructed. The only other issue I had was that it it is not clear whether the fan should be mounted label up or down. (I settled on down...) The PSU switch is a bit flimsy - like a cheap bedside lamp - but seems to work OK so far, needing two pushes to switch back on. The combination of fan and the provided passive heat sinks worked well and stabilised the cpu temperature to around 40 Celsius even on the lower voltage setting.

No me di cuenta que era una carcasa armable en capas, pero resultó divertido ensamblarlo. Es muy resistente y el ventilador que incluye es mucho más silencioso que otros que he llegado a probar. Se ve muy estético y deja espacio para todas las conexiones. El cargador no lo llegue a usar pero se agradece que vaya incluído.

Queda perfecto, además de darle un look mas original a tu Raspberry la carcaza es completamente funcional.

Es un accsesorio muy completo y con una guía grafica facil de seguir :)