AKM1/2" Hand Manual Reversible Impact Driver Set Extractor-12 PCS Impact Screwdriver S2 Steel Much More Durable Disengage Rusted Fasteners or Frozen Bolts

Overall, I’m very happy. The driver seems very solid with a good weight and size to it and easy to use. The bits are bits, so we’ll find out how well they hold up. The driver worked well and I got the screw out that I needed to get out. For the money, it’s worth it.

This tool is a must for every mechanic especially those working on cars or outdoor screws. All screws rust and this tool helps free stuck screws but you need to first tap/bang the stuck/rusted screw to help loosen/crack the rust and then spray liquid wrench and wait. This helps a lot. Then use the impact screwdriver. If it’s really rusted you need to bang the screws with a tap tool and rap it several times. If you don't do this, the bits will probably bend or break and you will give the impact tool a bad rating. ALL impact screwdrivers uses the same spec for the bits. All bits will bend or break if you don't help crack severely rusted screws before you use the impact tool. Do not judge the impact tool on the bits. The only problem with this tool is that it is not as smooth as others I've used but it still works great. It comes with more bits than others and with a metal case for several dollars more. Great manual impact screwdriver if you follow my advise.

I bought this so that I could remove the flat head screw that holds the brake rotor in place on my Honda. It works well enough to do that and it isn't very expensive. It seemed to be better made than some of the cheaper ones available on Amazon. It's sturdy enough to last a lifetime of home garage use. It helps to lubricate the cam slide that rotates the head. Also, there is a chance that the direction of rotation will change after an impact, so check it before each strike. I only takes a single strike to loosen the screw, or maybe a 2 or 3 if it's really stuck or you're still finding out how hard you have to hit it. I would up using a 2 lb drilling hammer and a moderate swing to get good results.

Yeah that saying comes with emotion, and sometimes with four letter words other than Jeep. If you have tried to take out a 25 year old torx bolt with two colors of paint on it you might know. Bent one 3/8 torx bit, nearly stripped a bolt completely, oh so many times I’ve carved out the interior a a bolt head. So I stopped and ordered the manual impact. Pair it with a small sledge, seat the bit in the bolt first, then whack the bolt firmly 6 to 8 times. Used a breaker bar (3/8) seating the bit again l, then with a few taps from a hammer, slowly turn the breaker bar and wow! 20 bolts in the window and door hinges came out. Stunned.

works as intended

Nice tool easy to use and got the job done!

Used to replace my rotors on my vehicle. Great product

Tool itself is probably ok. Not a lot to a hand-held impact driver. The metal box itself is extremely cheap. The metal is very thin and bends easily. Corners are not welded resulting in flimsy construction. The side can literally be folded out by hand. The driver bits are also covered in something that resembles a painted finish. Disappointed compared to my 50 year old impact driver.

Works great

Package came and product was damaged. The folded container is metal but it's cheap and one of the rivets that attaches the lid was broken. The plastic insert was also broken so the bits flail in the container.I'm sure the unit will function fine. But it's nice to be impressed right off the bat. I'm not.

Llego antes de la fecha de entrega

Excelente para aflojar tornillos con pegamento ademas sus extractores son muy utiles

Me gustó la presentación y sobra decir para que lo usé ya que es el diceño de la misma.