mxuteuk5pcs Snap-in Round Rocker Switch Toggle Power Switch SPST ON-Off 2 Pin AC 250V 6A 125V 10A, Use for Car RV Truck Auto Boat Household Appliances MXU1-5-101

good quality switch, works as advertised.

Power indicator lights failed on my Bunn coffee maker. These switches are a perfect replacement, easy to install, and fit right.

This product worked exactly as advertised. I've only used it for about 50 on-off cycles, so I can't comment on long-term reliability. I wired it for 120VAC, USA residential current. The LED works just fine. From this I would conclude there must be some resistance component inside on the light circuit. It was a little difficult getting the switch to seat in my project box. This was easily solved with two-sided tape.Regarding the pin identification, the diagram supplied in the Amazon post is correct, but I'd have to admit it's not crystal clear. Other reviewers have also provided pin outs, all of which seem correct. The following wire colors are for USA 120VAC residential current, colors will vary in outher countries.Pin 1: connect to the hot wire coming from the wall socket (black in the USA) Caution: this is easy to do if you are using a three-prong plug. In the case of a two-prong plug make sure it only goes in one way.Pin 2: goes to the hot side of your device. Pushing the switch connects pins 1 and 2.Pin 3: If you want the LED to work, connect pin 3 to the neutral wire from the wall socket (white in the USA). Note: the neutral side of your device should also be connected to the white wire.I did not intentionally wire this incorrectly (by reversing the hot and neutral wires). I suspect your device would still switch on, but I'm not sure the LED would work.

I used one of these switches on a small home-built vacuum pump, and it works great. Not the beefiest switch around, but it does the job. And I like the integral pilot light which tells you the switch is on (not important in my application, but could be in others.

Bought these rocker switches for my tractor to add some lights. Good quality and easy to install and are Lit when activated nice feature. Great value and recommended.

Very good value and functions as expected.

I got these to replace a broken switch in an oil heater. They fit and were easy to install.

I like them they worked great

Bought to fix our Cabelas dehydrator

They are handy, soft, small and nice.But they're small

Exactly as described and worked perfectly!!! Had a switch on a oil heater that didn't work and replaced with one of these. The heater now works perfectly and the wiring diagram was helpful as well!!

Well the button on the coffee maker broke, use this switch to fix replace the broken one and we can now make coffee again. Pro tip, take a picture of the wiring of the switch you are replacing before you dissemble it so you don't have to try and remember the wire up a few days later when your switches arrive because you got ahead of yourself when you took it all apart initially.

Arrived next day. Exactly what I needed.