Nilight ZH303 2PCS 6.5 Inch 120W Spot & Flood Combo Driving 16AWG Wiring Harness for Led Work Light Triple Rows Off-Road Truck Car ATV SUV, 2 Years Warranty, White

Installed these on my Toro Zero Turn mower. The install took about an hour and 30 mins and was surprisingly smooth and easy. There was minimal drilling if you use existing bolts and holes for relay. Only drilling was for the on/off switch. Relay installs nicely near battery and the extra wire tucks up well under cup/phone holder with a couple of zip ties. I installed the light brackets with the existing “Timecutter” front cover star bolts. The lights fit great and are very bright. Tested at night and the two new lights lit up my yard almost too much, but makes mowing at dusk or dark no problem. The red doesn't quite match the red on my Toro so I wish I would have went with the black lights, but they still look great. This is mostly just me being picky, but worth considering. Seems like a great value for the price.

I can see clearly now the rain has gone. These lights were just what I was looking for. The harness is well-made, the electrical wiring harness not a horse harness. Everything operated as expected would purchase again.

For the price they do a good job. They are easy to install, the color they put out is good, and bright.

The media could not be loaded. Bought these to mount on the new Armodillo Pre runner grille guard. For the price these lights are extremely bright and seem to be well made. The six mode is a bonus that will come in useful in an emergency or when needing to be seen while parked on the side of the road. Added some LED In the rear window to give full coverage.Installation was pretty straightforward with the included harness being well constructed. The only issue was getting the plastic connector for the on/off switch through the firewall grommet. This connector is fairly large due to the number of wires used in the harness. You can always snip this off, slid through the grommet and then reconnect using a good grade of connectors.I would highly recommend that you use heat shrink on each of the wiring connections from the harness to the light cables. The included flat blade connectors come with clear rubber slide on boots, but they seem flimsy and are not waterproof. I snipped these off and used a heat shrink style connector with heat shrink added over this. Add some wire looming and secure.Overall, I am very pleased with the lights and recommend to anyone looking for a bright off-road setup for little cost.

You cannot beat price for better quality lights. Super bright and tough been through rain, mud, gravel dusty roads. Tough as nails. No flickering at all. No water inside after Heavy rains.Flash mode is great for safety and orange/white flash back forth or just 1 or other. 6 inch is good for bumper mount.Wiring, relay, fuses, and switch including instructions. Can't beat that.

Extremely bright! Excuse the messy photo, but I took a photo when I was testing to make sure they worked. Added this to my electric conversion reel mower with a DC to DC converter and it definitely gets bright.They look good and don’t run too hot. The heat sink definitely takes a good bit of heat out.I have used it during light rain so it seems to be water resistant. Didn’t fog up.Perfect size honestly, not too bulky/large. Not too small to be ineffective. Lights up my entire yard.Will update if they ever fail.

I like the size and brightness of these lights. I would suggest using a relay to prevent damaging the switch. I have a similar one mounted on the ROPS bar of my tractor for a rear work light. I have a longer one mounted on the front of the ROPS bar as a forward facing work light. I am using this set of lights for side illumination as well as a lower position forward facing lights when I have the forks installed. The forks interfere with the headlights. The housing on these lights are very durable. The installation is very easy and they are very easy to use. I caught these on sale and I am really glad I purchased them. If you are considering buying this product, don't doubt the quality because they aren't a "brand name." I have been using auxiliary lights for years and I can attest to the fit and function of this product. I have a tendency to be a bit rough with this type of product and these are holding up just fine.

So far these are very bright & easy to install, comes with everything you need to get them installed! I recommend them