






Desertcart purchases this item on your behalf and handles shipping, customs, and support to Morocco.
Buy ZHOUBIN Sheet Suspenders Clips, Bed Sheet Straps Mattress Sheet Holders for Twin, Full, Queen, King - Keep Sheets in Place Corner Sheet Grippers Fasteners Sheet Stays: Sheet Fasteners - desertcart.com ✓ FREE DELIVERY possible on eligible purchases Review: Great hold - A little tricky to do yourself for the first time while balancing the mattress but fits great. Well made and lasts a long time. The clips dont wear out and dont tear through the thin mesh on the mattress protector we have on the bed. I use it to hold that and my sheets. My husband rolls a lot in his sleep and I like that they're adjustable to retighten them down. The corners never come off. Might need another set to go through the middle to hold the sides on the long edges of the bed but these do their job holding those corners firmly in place Review: Eliminate any extra time spent on your sheets - I used these for my queen sized 13” mattress on a fully adjustable bed frame with great results. I have always hated having a loose bottom sheet that gets all gathered up in the middle of the mattress, which is just exacerbated by the adjustable frame, especially with a fairly thick mattress like mine. I’ve never had any kind of sheet securing product before but I had someone mention sheet suspenders and after some research I decided to try these. I liked that this came with a total of four straps so that I could use two in an an “x” from corner to corner and two in a “t” pattern from top to bottom/side to side. The straps have two clamps at each end (four total per strap), equaling a total of 16 clamp points. It looks like most of the time these are sold with only two straps, making you choose between the x and t, Which seems like a headache. I can see how having only two would still allow some bunching, even though it probably decreases it some. The straps are very easy to install. The first time I stood the bed on its side to do it but from now on I’ll just change the sheets and reach under to do the clamping. The clamps are easy to open and close, seem to be good quality, and have not come open at all even with the moving frame. I even used them to clamp my mattress protector beneath the sheet and that’s been fine. Oh, and the plastic part inside each clamp does seem to protect the sheets from ripping, as I was concerned about this but haven’t seen any signs of concern.














| Best Sellers Rank | #246,006 in Home & Kitchen ( See Top 100 in Home & Kitchen ) #132 in Sheet Fasteners |
| Customer Reviews | 4.4 out of 5 stars 2,416 Reviews |
C**Z
Great hold
A little tricky to do yourself for the first time while balancing the mattress but fits great. Well made and lasts a long time. The clips dont wear out and dont tear through the thin mesh on the mattress protector we have on the bed. I use it to hold that and my sheets. My husband rolls a lot in his sleep and I like that they're adjustable to retighten them down. The corners never come off. Might need another set to go through the middle to hold the sides on the long edges of the bed but these do their job holding those corners firmly in place
S**N
Eliminate any extra time spent on your sheets
I used these for my queen sized 13” mattress on a fully adjustable bed frame with great results. I have always hated having a loose bottom sheet that gets all gathered up in the middle of the mattress, which is just exacerbated by the adjustable frame, especially with a fairly thick mattress like mine. I’ve never had any kind of sheet securing product before but I had someone mention sheet suspenders and after some research I decided to try these. I liked that this came with a total of four straps so that I could use two in an an “x” from corner to corner and two in a “t” pattern from top to bottom/side to side. The straps have two clamps at each end (four total per strap), equaling a total of 16 clamp points. It looks like most of the time these are sold with only two straps, making you choose between the x and t, Which seems like a headache. I can see how having only two would still allow some bunching, even though it probably decreases it some. The straps are very easy to install. The first time I stood the bed on its side to do it but from now on I’ll just change the sheets and reach under to do the clamping. The clamps are easy to open and close, seem to be good quality, and have not come open at all even with the moving frame. I even used them to clamp my mattress protector beneath the sheet and that’s been fine. Oh, and the plastic part inside each clamp does seem to protect the sheets from ripping, as I was concerned about this but haven’t seen any signs of concern.
K**N
Works well, not fun to use
Does its job but a pain to clip and in-clip
B**N
Love it
Slip resistant. Fits all beds bc it’s adjustable. I can sleep easier now that my sheets don’t come up.
B**K
Simply BEDazzled
I've been renting a nice room with a pretty decent bed. The room came fully furnished leaving my adjustable queen size bed in storage. I've been using a high-quality 3"memory-gel mattress topper for several years now if I did it extremely comfortable so I move that memory topper to my current standard bed. My memory foam topper is 7 inch too wide and 5 in too long for the standard mattress but it was expensive and I don't want to cut it down. After a year of frustration I ordered these bed sheet holder straps and hopes they would pull the extra padding to the side, tightening up the bed. Replace both ratchet straps going across the bed the short way I space them out 2 best pullin the excess mattress on the side where I have been sitting and working. The straps remain tight, mattress topper is full down around the side of the bed and the sheets are tight which is one of the most important things allowing me to make my bed each ring in about four seconds. I do not know that my drill Sergeant could have bounced his quarter on my bedding but I love the tight smooth perfectly aligned bedding every morning.
R**T
Finally, my bottom sheet stays put!
So for a long time now I've been frustrated with the bottom fitted sheet pulling up and making me uncomfortable and getting out of bed to pull the corners down. I have known about these things for a long-long time but I'm never able to find them when I'm in the store and just keep forgetting to look for them on Amazon. Finally, in complete frustration one morning, waking with the usual clump of sheet under me I grabbed my phone and found these. "CLICK" done...they're on the way. 24 hours later, I put them on. My queen size mattress is very thick and has a topper to boot. So its extra thick. It's also very heavy so putting these fasteners on, corner-to- corner (criss cross) is a little hard but very worth the effort... I don't know what took me so long to order them but I finally wake up with my bottom sheet in place. I've had mine for a couple of months and very satisfied with them. So if you toss and turn and your bottom sheet pulls up in the corners and frustrates you too, then put an end to it. I'd recommend these to everyone.
S**R
Clasp broke on first try, but overall decent
Tl;Dr It was hard to put on, but overall effective despite the fact that on of the clasps broke on my first use. Straight out of the box, I grabbed fresh sheets for my bed and set to work on putting these on. As one person, it was decently hard and left me sweating, but the product seems to work. This was my second time trying a sheet product similar and this one works much better so far since the other one stopped working over time and got stretched out. For the application, I had three corners done on my queen size bed and went to do the last corner. I did nothing differently, but the clasp broke explosively into three pieces once I put it on. I have no idea what I did, but instead of using both clasps for that corner, I just used one clasp and it seems to be working effectively for the few nights I’ve tried it. I think I may have received a defective one or possibly did something wrong, but I had no issues with the rest of the clasps. I wish the product was easier to put on, but I realize that in order to be effective, there are only so many options. The clamps feel super strong and were honestly a bit difficult to open, but hopefully that results in them lasting for a long time. Overall, great value for the price!
M**E
Great! Worth your money
Stays on for so long! Great product! Kinda easy installation. It's kind of difficult for it to be an easy application because we had to flip the mattress on its side two different times but it lasts forever.
S**.
Holds King sheet sets on well
Bought the 2 pack. Will keep the other as a spare. But may never need them. As the first ones fitted are of high quality and extremely functional!
G**W
They h'work, be and they're STRONG!-!!
GRReat product!-!!
E**.
Very useful product
Reduce time when fixing our bed
E**E
Fitted sheet stays on
This is the best thing ever my boyfriend rolls so much in the bed it’s always rolling the fitted sheet right off the bed so I got these and it works really well it stays on now so if you have that issue then get these.
R**I
Works As advertised
Works As advertised
Trustpilot
4 days ago
2 months ago