OPT7 Aura Aluminum LED Underglow Kit for Car with Remote Control, Exterior Neon Accent Under Glow Lights, Rigid Waterproof Strip Lights, Music Soundsync Mode, Multicolor RGB Light Bars

I recently installed the OPT7 Aura 4pc Underglow Pickup Truck LED Lighting Kit, and wow—what a transformation! 😍 These rigid aluminum bars are built to last and provide a sleek, modern look under my truck. 🔧 The installation was straightforward, and the included remote control made it easy to customize the lighting to my liking. 🎛️The full-color spectrum offers endless possibilities, from solid colors to dynamic patterns, ensuring my truck stands out wherever I go. 🌟 Whether I'm cruising down the street or parked at a show, these lights turn heads and spark conversations. 🗣️If you're looking to add some flair to your ride, I highly recommend the OPT7 Aura Underglow Kit. It's a fun, affordable upgrade that makes a big impact! 💯🔥

Overview:Pros->Great build quality>Easy installation (but can be time consuming)>Very bright at night>Easy to control (using both the main remote control and key fob)>Uses barely any battery>Will work on almost any carCons->Connectors are flimsy (the metal prongs inside)>Cables aren't long enough for longer cars>Key fob controller has a short range>Is barely visible during daytime (which really is no problem)>I had mounting issues on my vehicle on the sides (results may vary for your vehicle)In depth review:I had been looking at tens of different underglow kits on amazon, and across the Web. Most scared me with their cheap prices (some costing only $30!) and others just did not have any good reviews at all. I came across this Opt7 kit about a month ago and instantly could tell that this was no ordinary kit. This one seemed to have much higher reviews, and much better advertising than any other sub $100 kit. So I purchased it, planning on doing the full installation myself. First I tested it with the 12v outlet to make sure that all of the strips and cables worked, which they did and the brightness sitting on the roof of the car during broad daylight surprised me (however once they are under the car it is a different story during the day). I played around with all of the features and functions before I began the installation to make sure everything was on tip top shape. Then I began to plan the runs for the cables going from the control box to the light strips. About the light strips, holy cow those things are robust! They are encased in a metal sheathing with some sort of clear rubbery coating on the side where the lights shine and to this day mud, dirt, and debris have not affected them. When I was first installing the front and back I made a bit of a mistake. It was getting dark outside so I wanted to move in the car to work on it where there was light. Well I accidently ran over the cable that I had attached to the rear strip and it yanked the strip out of the spot I just had it sitting in and bent the entire strip into a soft Crescent shape. I almost freaked out until I bent it right back into its normal shape and it functioned just fine! However one of the metal prongs inside of the connecter at the control box got messed up by this mishap and caused all of the blue diodes in any strip connected to it not to function, but that was fine by me as I only intended to use green anyways. Everything else during installation was smooth up until it came to mounting the side strips. My 2011 Honda Accord Ex sedan had no grommets, holes, or spots to attach the strip to. There was also a rubberized coating on the entire bottom of the sides of the car that would not allow me to drill into the metal to mount the strips. So I would up using zip ties, which have held very very well, and different kinds of tape on the ends, which has not faired so well. Every other day one of the strips would lose its tape do to rain, or wind and it would hang about 3 centimeters from where I had it mounted. Eventually I was able to use packing tape (of all of the tapes for some reading that was the best and is still holding on after 2 weeks) to hold up the strips. After that I had to run the rear strip and found out that the cable was about 2 feet short of where I needed it to be. Maybe if I had mounted the control box in a more optimal place it would have worked but I already had a cozy spot for it near the top of the engine bay (another thing: it is mush easier to just mount the control box in the engine bay somewhere near your fuse box, rather than inside the car). It is worth mentioning that my car is longer than the average sedan by about 8 inches so your milage may vary. So I just bought an extender cable that was in the recommended section under this product and it worked great! Everything functions except for the rear strip's blue diodes but that is from my dumb self messing it up. I would highly recommend this product as it definitely turns heads and is a great way to personalize your car without doing anything to drastic to the vehicle.

These lights look great and are well built. For the price they are the ultimate upgrade for your ride. They are bright and easy to install. I love these light bars! Get some 3m double sided tape for super easy installation.

Works really good. It looks really nice. Wish it had an app.

Had these underglow lights on the whip for like 7 months now still goin strong, no cap. Lights hittin, no flicker, no nothin. They look clean at night, had folks breakin necks.Instructions was trash tho, and they ain’t really made to fit every car. I wasn’t tryna drill into my frame, so I zip-tied them joints up real ghetto but hey, they still holdin up like champs.If you got some common sense and don’t mind makin it work, these lights go dumb. 4.5 stars easy.

The media could not be loaded. So far so good. Easy to install on my Kia. Wiring was close to being to short on the passenger side so for future buyers I’d recommend an extension. Everywhere else was long enough. There is no adhesive on the back, I just used the mounting kit brackets and it has stayed so far. The colors are super bright, though the remote control can be kinda finicky at times but it still works well. The video is taken around 9pm and they are very bright. I ran my control box to the inside through my firewall. The photo of the lights from the outside before the remote control picture was taken around 7:30pm and you can see the light is pretty well seen. Overall super happy with them and the amount of light being shown. I love using OPT7, I’ve used them in the past and they’ve done the job well.

Purchased on 4/28 installed the next day professionally paid $300 for install. They worked great for 3 days then one side went out and the rear went out completely. When the technician started troubleshooting he noticed the metal housing of the leds was arching with the ground. Making them flicker. It blew the fuse on the power. Swapped fuse and blew it again. When checked with a multimeter he stated somewhere on the led strips 12v power was exposed to the metal housing and was causing the fuse to blow. After 5 minutes the box smells like burnt and all the lights stop working he tried to test each led strip with the power probe and none of them worked. I emailed them and havent heard back from them yet. I'm disappointed because this is my 3rd set my other sets are older versions still working fine and never had any issues and customer service seems to be non existent. I emailed them and been waiting for a reply. I will update this review depending on the outcome but i assure you that if they dont make this right i have over 100 thousand subscribers and they will all know about my experience.

Easy to install and gives great lighting to under camper. Can change colors with remote. Excellent customer service, very responsive to questions.