Legrand Wiremold CMK50 Cordmate II 10 Foot 12 Piece Cord Cover Kit, Organizer for Wall, Holds Up to 3 Cords or Cables, White (1 Pack)

These were bought to hide my surround sound speaker wires across the living room. I purchased one kit before measuring the length in which I needed so of course I ended up being short. This Kit Includes: 4 - 30" CordMate II Cord Channels, 3 - C59 Couplings, 2 - C56 Flat Elbows, 1 - C57 Inside Elbow, 1 - C58 Outside Elbow, 1- C51 T-Fitting. This means you have 120" of cord cover. I used a saw to cut these to certain lengths and the plastic held up very well. It didn't split, break, bust or fray the ends to make it look unprofessional. With the addition to the couplings, elbows and fittings you can run these very professional looking with no cords poking or hanging out making your living room or other place areas of the house you have cords look like crap. This is a very nice alternative to tacks or coax cable clamps you nail to the wall. It's a more expensive alternative but the look you get with these really pays off because it reduces clutter.There seems to be plenty of room inside the cord channels and I was able to place two separate 18 gauge speaker wire into this without any issues. What many other comments fail to mention is the fact that these can be unsnapped from the side to allow you to add or remove cords more easily without having to run them from end to end. This was a nice bonus as I had already run the cords and had them hooked up prior to receiving these.They came white but are easily paintable to match any room / color you have and makes this is a nice addition to have with these. I will note that prior to applying the sticky side to the wall I use alcohol to wipe down the entire area I would be placing these to clear up any dirt or debris. This tends to be an issue when sticking anything to the wall and you should follow this step to ensure that it lasts for awhile. These can be used not only for speaker wire but ethernet cable, HDMI cable, coax cable, power cables and anything else you can slide into this. I would like to add that these do have limited space inside so you may not want to use these for every cord behind your TV / TV stand or computer desk. Once you do decide a place to use this and stick to a surface it adhesives very quickly and you only have a few seconds to decide if that's where you'd like it or not. I'd go ahead of time and make specific spots you want to place these to avoid any crooked placings.All in all a very nice product and so far so good!

This is our second time buying this cord cover kit - once to cover the cord of a hanging corner lamp and the second to cover a cable cord to our hanging TV. Both times we have been impressed with the quality and ease of use. Just cut to length, put the cord in and stick to the wall! The lamp has been hanging for almost 2 years and is starting to peel away at the corner, but nothing a piece of 2-sided tape won't fix. The TV cord cover is great to go around our bathroom door, and matches with the already white trim. The only thing that we ran into that was an issue was we didn't have enough of the corners and connectors, but luckily our local hardware store carried a pack so we were able to finish up our project in a weekend.

The Wiremold CMK50 conceals a few small cables (power, coax, HDMI, etc) while subtly blending in and reducing the risk of wild wires becoming an eye-sore.This particular cable raceway includes various angles in order to route the cable in a preferred direction. It is advised to plan ahead and calculate how many of which type of angles you will be needing. This is what is included:4 pieces of 30" channel (C50)3 couplings (C59)1 t-fitting (C51)2 flat elbows (C56)1 inside elbow (C57)1 outside elbow (C58)I needed more of just about everything so I (easily, at this price) ordered another - but individual pieces are available by searching "wiremold (individual part number, listed above)."Assembly is fairly simple. I was able to easily cut to measure using a jigsaw. In most cases, cuts do not have to be exact (but relatively close), they will be covered by the joints. The adhesive is strong and shows no sign of failing.The matt color is not the prettiest but it does allow for painting. Painting the raceway the same color as the wall will help camoflauge its presence - but not visually eliminate it. In any case, it seems a better alternative than hanging wires or punching a hole in the wall.This raceway is a good purchase. The included angles allow for a great amount of flexibility, it's easy to use with minimal need for additional tools and it gives necessary cables a clean look.

One of the best investments that I have made for my Home projector and screen. I am using it to hide my wire from the projector and the screen and I am amazed by the quality and usability. Definitely a no brainer and I would suggest everyone to pick one if they intend to do so or they are in for the market for a perfect wire hiding solution. Just one thing to make sure is be very careful when you stick it, because once you done its bit hard to take off without having issues with the paint. but if you try good you can take it off easily. I made a mistake of pulling it apart and my paint got peeled off. Its my mistake though. It sticks perfectly and no issues with coming off from wall and all. Make sure you use it in a smoooth finished area. its really easy to cut as well for your conveneince. I used a box cutter and its really easy for me. Even though its little on the pricier side I won't mind spending it because the end result is so good and satisfying. Definitely a recommend.