Sparco SPC1391BKSV 4 Wheel Trims hubcaps 13 inches Lazio Black/Silver, 13", Set of 4

Not only do these look the best on the market but they seem pretty durable as well! It was a tight fit installing them on my honda fit but im very happy with the end result.

As the pics show, these are beautiful covers that don’t show any of the ugly steel wheel underneath and give a modern “black” wheel look. In the pics, mine are on 16” original wheels. The metal ring inside the cover snap onto a top or bottom notch to adjust tension inside the wheel. The instructions aren’t clear on this - the bottom notch is more tension the top less tension (mine are on top notch). You also must align the curve on the metal circle to the only “slat” that is a bit wider for the air nozzle.I couldn’t get the covers onto two of my wheels, and as instructed, slightly bent the metal cover “inward” to reduce tension. If you are fighting to get it on, don’t, bend the Metal and try again. It should be moderately hard to snap into your wheel, but not nearly impossible (I wasted 15 min figuring that out). A rubber mallet helps, and a wide flat head of really one to push any last difficult clips into the wheel (Which if bend metal, shouldn’t be needed).Mine are on very tight and haven’t fell off on California’s horribly maintained freeways :)

Look great

perfect! before and after

These wheel covers look good but you have to be careful installing them. Just gently pushing on one the plastic cracked one but it stayed on my wheel. I left it since you could hardly see it and drove 600miles the next day and a dirt road. They held on just fine. All in all they’re nice for some cheap wheel covers.

We have a car that needed to be dressed up for a demonstration vehicle. I was going to buy $1000 rims until I saw these. In the United States they offer nothing of this style...so I thought I would order them. These came from England. I got them...and the $45 for shipping was well worth it. These hub caps make the car look like it has $1000 rims on it. Very impressive. AND since they are not available in the USA you will never see them on another car. I love that.

I paid too much for these things because of the shipping costs, but I don't regret it. They look so much better than my OEM wheel covers. They are quite a bit tighter than other wheel covers, but I don't think that is a bad thing. Just bend the ring a bit and they'll pop on. Accessing the valve stem may be a bit tricky, overall I'm very happy.

I bought these for a 2016 Hyundai Elantra. The stock factory hubcaps are held in place by the lug nuts. These are not. They were hard to install. I am an ASE certified mechanic, I work on cars all day. The spring ring was a little too large for these wheels. I did get them on with out breaking any of them but 2 of them sprung off while driving within a week. Sad face.I have used other aftermarket wheel covers and have had not this issue. It could have been the steel wheels themselves.They do look pretty good.

Looks great on my polo. Read some reviews by some people that have snapped them and then wrote a bad review. They probably did it wrong.1. Install the wire (I used the outer setting) and line up the bend in the wire bearing in mind where your nozzle is.2. Line it up with your nozzle and press in from the bottom of the wheel with your knee to hold it in place and push gently from the bottom upwards.3. Use a plastic mallet or a small hammer with a cloth inbetween to hammer the last few clips at the top home and you're done.4. Step back and feel proud of yourself

Montati oggi 24 dicembre su Fiat 500l con cerchi in ferro 16" originali fiat, appena aperta la confezione e ad installazione completata sono passati 15 minuti, una passeggiata, fatti in ottimo materiale, uno lo avevo montato male il cappelletto della camera d'aria rispetto allo spazio apposito, in un attimo lo ho tolto e sistemato e rimesso, poi l'effetto ottico è eccellente, sembra un cerchio in lega, speriamo che duri....

The wheel trims look really well and unlike others their design hides a lot of the original wheel while still looking like a nice alloy effect wheel. I’ve marked down the stars due to the fitting of the trims. I fitted these to a Vivaro 16 inch rims and like other customers had mentioned they are too tight to fit with the wire at the back of the trim to keep them on and in position. If I would of forced them into position they would of broke the plastic pegs that put the tension to get a tight fit to your existing wheel. I adapted the fitting of the wire over one peg rather than under and this was the only way they would fit without breakage . Other wise it was to sand down some of the peg ends to sit into the rim . Once I adapted this method of fitting took no longer than ones I had fitted previously. My then concern was I may lose the rims at speed on rotation. These are not the cheapest rims and you don’t want to lose your investment.. shame really as this small fault let’s them down what is a nice wheel trim. The price of the rims are a little expensive over others considering they don’t fit as good as some of the cheaper options . So some fine tuning on Sparco s part to get this product into line and price bracket. This Done on there part I probably would change my feedback to 5 stars.

Ich bin mit den Radkappen zufrieden. Die Qualitätsmäbgel kann ich nicht bestätigen. Sicher sie sind aus Plastik und wenn man Sie mit dem Hammer raufprügelt gehen Sie sicherlich kaputt, aber wenn man es mit Verstand macht klappts einwandfrei. Ich habe die Metallringe vor der Montage, wie in der Anleitung auf dem Karton beschrieben mit einer Kombizange an der Ventilaussparung zusammen gebogen und dann in die äußerste Nut. Wenn Sie richtig gebogen sind, will der Ring immer wieder aus der Nut rausspringen. Bleibt er drin, war es bei mir noch zu straff. So vorbereitet lassen sie sich wie alle guten Radkappen mit leichtem Druck montieren und sitzen dennoch fest. Optisch denke ich sie passen ganz gut zu meinem silbernen T4, aber das ist ja immer Geschmackssache.

Very easy to fit. You can see the grey and the black. Looks good on our grey van. Looks fab. Made our van look even cooler. Thank you. Highly recommend.