Table Legs Set of 4, Black

The legs look sturdy and were very straightforward to install. I chose to use screws that will penetrate the table top about 1/2 of the way; a trip to Walmart did the job for me. I forgot to put the bolt in before I screwed on the mounting plate for the last leg, but if that step is done, then all you need to do is screw the mounting plate into the table top and twirl the leg right onto the bolt.One of the legs stuck out at a slight angle for some strange reason, so that's the star off. It doesn't make a difference to me since the angle is so slight and I'm not putting much on the table, but it may be a concern to others. I made sure the screws were in correctly and the leg was straight as I put it on, so there's not much else I can do to fix it.All in all, a good sturdy table made at a moderate price.

Overall, these are solid legs but the quality control needs to be better. I only received 2 bolts not 4. Thankfully, these are a common size and thread but still wasted a trip to the local hardware store. Then on one of the legs a plastic trim was broken.On the plus side, the mount is pretty solid and so are the legs. I didn't tighten the legs to the mount too tight because of other reviews stating that the nut in the legs can shear off. The levellers on the feet are nice. For the money, a good deal.

The legs are very sturdy, and were easily attached to my table. I also like there ability to be height adjustable. I looked at a lot of legs before I bought these. Even with the shipping, which was very quick, the equivalent from somewhere else was at least 10 dollars more. The only reason I am not giving them a 5 star is because they arrived with two of the levelers broken. This could have been caused by the shipper because the box looked like it had bee dropped hard. But, the box was not very sturdy or it might not have happened. I contacted SoftTech using Amazon, and they responded very quickly and sent me two new replacement levelers.

I will echo other comments here: these legs are packaged well and straightforward to install. But they are not sturdy, and this is especially obvious when putting the table into place after attaching the legs. If you try to flip the table from legs up (for attachment) to legs down (final placement in room), you can't let the legs touch the floor at an angle AT ALL while you flip the table up onto all 4 legs (one-person installation). If you do, the creaking and snapping sounds coming from the base of the leg where it attaches to the underside of the table is atrocious, and stressing this at all will surely cause something to break. Likewise, if you want to drag or push the able along a carpeted floor, the legs are not mounted to the table stiffly enough to succeed. The legs will merely bend at the attachment point. All in all, the legs work for a delicate table, but that is all. My advice is to look for something more sturdy. I won't be rebuying this, despite my need for more table legs.

Table Legs, Set of 4, can faster then posted, well packaged. All the item arrived as advertised. No screws. This makes sense since the length of the crews depends on the thickness of your table. I have a 10/16 inch thick table top just over half an inch. I bought half inch nails. Each leg uses 5 nails. It took me around an hour to install the legs.I would use this table as a pc desk, not for anything heavy. If I want to use it to hold more weight I would use nuts and bolts to attach the legs to the table. great buy, I like how the table looks.

Having five screw holes on the top-plate to attach to the table underside and a stout & sturdy bolt that the actual leg screw into make this the most stable leg of this type that I have used. It gets knocked down one star because the plastic foot is light-weight and very brittle. I had it standing on end on the floor (foot-side up in the air) as I was affixing the top-plate when it tipped over and the foot cracked and a piece of it chipped off. The plastic seems to work well enough when under the weight of the desk top, but it is advisable to handle with kid gloves during assembly.

I ordered this set of 4 table legs the company sent them out fast, they were delivered by UPS and were in perfect condition. The plates that hold the legs on are solid metal and use a heavy steel screw to atatch them to the legs and are very easy to connect. Very stable with perfect balance I mention this because the pair on and that came with my table are totally crappy and wabble from being off balance. With these however it's like having a new table, they are also very strong and easily hold a good amount of weight. The bottom has a great heavy plastic adjustable cap so you can extend the table leg length. I am very happy with this product and if in the future should the need arise I will not hesitate to buy them again

These legs were an excellent choice for me. Have a corner table leaf that connects my computer tables to for an L shape. Since I can't do that because of width of my room I added the leaf to one side of the table as 90 degree extension and using 2 of these legs plus mounting plates I have a very sturdy L shaped desk. It looks the factory designed it this way.These legs were very easy to install