10pcs Transparent Stand Support for Dolls Mini Display Holder

Very nice doll stands for display. Not the most sturdiest stands ever but they are holding up pretty well with my 11 inch regular size and curvy size fashion dolls. Comes in 3 pieces that you put together very easily. The piece that goes around the dolls waist seems a little fragile so take care not to bend too much when putting on your dolls. The waist piece fits my regular size doll around the waist no problem but with my curvy doll I had to push that piece lower on the stand (pole) to fit around her thigh as shown in the pics. But once on the stands, there was no tipping over or anything and looks very nice. I think it's good value for the money and would purchase again.

These stands are like an improved version of the stands that come with Monster High dolls. I have several MH stands that fall apart or have the clip slide freely up and down the upright, but these replacement stands snap together solidly and the clip part is very snug on the upright! Once you position it at a specific height, it's not going to move. In addition, the bases are larger than the MH stands by quite a bit. This makes them more sturdy, but also means you can't place your dolls as close together, so keep that in mind if you are trying to display them in a limited space. The upright is about 1/4" shorter on these replacement stands, but it still fits Marisol Coxi the bigfoot doll. The clip itself is larger than the MH clip, so it doesn't hold the dolls as tightly but I find that to be a plus, especially if they're wearing layers of clothing. The clips also seem more flexible which is good, because we've broken a few MH stands. The only negative I can report is that one of the bases of one of the stands came slightly warped. Luckily I ordered two sets for a total of 20 and I feel that they're a great value.

I bought these to display my G3 Monster High dolls. They worked great for most of the dolls, but for the tallest and curviest dolls, they're a little dissapointing. They're still able to stand the dolls up, thankfully, but just barely. For Venus and Abbey, they're just a little too tall to stand with completely locked knees. Abbey specifically is so curvy, she bends the stand. For the other dolls, it works great. The clips are wide enough for everyone in my collection, they're easy to assemble, and I think they're pretty affordable for what you get.

I bought these to display "Skinny Ken" and BTS dolls. These male dolls are as tall as Ken, but much thinner-- almost as thin as Barbie. This meant I needed a stand that was tall enough for 90s Ken but secure enough for 90s Barbie. These stands worked! The stands hold my dolls solidly and don't wobble (I shook the table and the dolls remained standing.) The base is a bit lightweight, but broad enough to keep everyone standing upright (even on one leg or with both legs off the ground in a jumping pose.) Assembly was straightforward and took me under 60 seconds (I snapped the shaft to the stand, then slide on the waist-grip.) The waist-grip can be adjusted by sliding it higher or lower depending on how tall my doll was (BTS and skinny Ken are both 11 inches. Skinny Ken is ~11-11.75.) The slider can be adusted up or down without disassembling the stand, but the slider cannot be loosened or made tighter (it's for dolls with a waist circumference similar to ~3.75 inches/9.5 cm. Anything thicker than skinny Ken or BTS won't fit.) The color is not 100% transparent, but a milky opaque color (as much as I like 100% transparent plastic, it shows dirt, scratches, and yellowing more obviously than opaque plastic does.) The waist-grip does NOT fit over the Skinny Ken and BTS dolls' clothes-- but grips are supposed to go UNDER the clothes! Putting grips on clothes DESTROYS DOLL CLOTHES (except for collector-grade grips such as the one on Obitsu stands, which cost three times as much as these ones did. Besides, most collectors I've seen hide stands UNDER clothes to show off the clothes and make the display look more natural.) Therefore, I removed my doll's shirt, snapped the grip onto its waist, and then put the shirt back on over the stand. To my delight, the grip didn't show through my doll's thin t-shirt, so the display looks natural. The grip is stronger than it looks: I posed my dolls repeatedly without removing them from the stand-- and without them falling off. I'd love it if they released a version of this stand with a joint to adjust the doll forwards/backwards/side-to-side (this one only goes up or down.) Despite this limitation, I could still make my dolls slouch forward slightly in a surprisingly natural mid-walk pose. I could pose my dolls without removing them from the stands, and without them falling off the stand (the grip is stronger than it looks.) I posed them with both legs off the ground, walking. Overall, these stands are better than I thought they would be. They are sturdy, easy to assemble, and are a budget alternative to the pricier Obitsu stands. These work well for BTS and Skinny Ken, and will probably fix Bratz Boyz. It will NOT fit the original Ken dolls, so it also will not fit Sideshow Collectibles (much less Hot Toys), Customhouse Ange Ai or Volks YoSD. It might fit other skinny BJDs or action figures with measurements similar to skinny Ken or original Barbie.

I ordered this to display my Barbie dolls bases on a You-tube video and they work perfect.The opaque color stand just disappears into the background.

The first set of these doll stand holders were great, however this set not so much. They were a hassle just to assemble, which consists of just 3 parts. 2 of the stands "snapped" in half during assembly, and one of the pieces that holds the dolls around the waist or neck also just snapped in half while I was sliding it on the post. The first doll is a standard size barbie doll and it works ok, I have to put it at a slight angle or it will fall over. The second one, is the equivalent of a male barbie doll. The only way I could make the stand work was by sliding the doll into the stand sideways. (Please see pictures) The stand did hold the doll this way, however you can see that the stand pokes through the clothing of "Prince Phillip". However, once I figured this out the dolls look good in the stands. These stands do save space and made our daughter's ''Disney Princesses" shelf look nicely organized. This box did not have any missing parts. These will work well with standard barbie dolls, but not much else.

Got these doll stands for the girls barbies. Makes playing barbies easier for them, especially when they play shopping barbie. They are made strong and sturdy, easy to assemble and take apart. These stands would be great for doll displayed in a case.

It's very effective for my dolls. However, dolls with a larger body type do not fit the doll's waist. Overall, it's alright.

Me agradaron mucho los soportes, había comprado antes para las muñecas de mi hermana y mamá, pero he pedido mas nuevamente pero ahora para mis figuras de acción. Muchas gracias.

Very sturdy and serves as a good doll stand

They’re fine. I use them for the g3 monster high dolls. Not great, kinda weak, a couple snapped on dolls like abby and draculaura who have bigger waists, but i managed to keep them on eventually. They’re a bit short too, abby is a tall doll and I had to have her knees bent a little to fit. They’re a good enough cheap option for doll stands.

use for dolls